Compression and impact testing of two-layer composite pyramidal-core sandwich panels

Quasi-static uniform compression tests and low-velocity concentrated impact tests were conducted to reveal the failure mechanisms and energy absorption capacity of two-layer carbon fiber composite sandwich panels with pyramidal truss cores. Three different volume-fraction cores (i.e., with different relative densities) were fabricated: 1.25%, 1.81%, and 2.27%. Two-layer sandwich panels with identical volume-fraction cores (either 1.25% or 2.27%), and also stepwise graded panels consisting of one light and one heavy core, were investigated under uniform quasi-static compression. Under quasi-static compression, load peaks were identified with complete failure of individual truss layers due to strut buckling or strut crushing, and specific energy absorption was estimated for different core configurations. In the impact test, the damage resulting from low-velocity concentrated impact was investigated. Our results show that compared with glass fiber woven textile truss cores, two-layer carbon fiber composite pyramidal truss cores have comparable specific energy absorptions, and thus could be used in the development of novel light-weight multifunctional structures.     

Hydrothermal synthesis of Pt/MWCNTs nanocomposite electrocatalysts for proton exchange membrane fuel cell systems

A hydrothermal method for preparation of size-controlled Pt nanoparticles dispersed highly on multiwalled carbon nanotubes (Pt/MWCNTs) has been studied to optimize the effective parameters (temperature, time, pH and stirring rate) using Taguchi method. The synthesized Pt/MWCNTs nanocomposite samples were characterized through X-ray diffraction (XRD), transmission electron microscopy (TEM) and X-ray fluorescence (XRF) analyses to identify mean Pt nanoparticles size and Pt content. The analysis of the primary experimental data and demonstration of the main effect trend of each parameter showed that a reaction temperature of about 140 °C, a reaction period of 5 h, a slightly basic reaction pH (∼9) and a stirring rate of 500 rpm are the optimum process conditions which give a low mean Pt nanoparticles size (2.8 nm) and a high Pt content (19.4 wt.%) simultaneously. Cyclic voltammetry (CV) analysis showed that under optimum conditions the synthesized sample gives a specific surface area of 99 m² g⁻¹. Obtaining the polarization curves for the two fabricated membrane electrode assemblies (MEAs) using the optimized catalyst and a commercial Pt/C catalyst (10 wt.%, Aldrich) with Pt loading of 0.4 mg cm⁻² demonstrated that the catalyst prepared under optimum conditions shows a considerably better performance.     

Isotropic-kinematic cyclic hardening characteristics of plate steels

Cyclic hardening of metals is considered as one of the most important features that affects extremely the hysteresis behavior of steel structures. One approach to study this characteristic is dividing it into two components, including isotropic hardening and kinematic hardening, and defining any of these components for any type of metals by calibrated data obtained from experiments. However, the lack of these calibrated data on metals, restricts this approach. Therefore, in this paper the isotropic and kinematic characteristics of five different steel grades from 100 to 485 MPa, under various strain ranges between ±1 and ±7% were proposed. Afterwards, four of these five grades were validated in order to find the appropriate combination of data for any of them, and to compare the result of this approach with those obtained from a well-known hardening model, Ramberg-Osgood. The results showed the high accuracy of the isotropic-kinematic hardening model in comparison to the Ramberg-Osgood method.     

ZnO nanoparticles induced effects on nanomechanical behavior and cell viability of chitosan films

The aim of this paper is to develop novel chitosan–zinc oxide nanocomposite films for biomedical applications. The films were fabricated with 1, 5, 10 and 15% w/w of zinc oxide (ZnO) nanoparticles (NPs) incorporated with chitosan (CS) using a simple method. The prepared nanocomposite films were characterized using atomic force microscopy, Raman and X-ray diffraction studies. In addition, nano and micro mechanical properties were measured. It was found that the microhardness, nanohardness and its corresponding elastic modulus increased with the increase of ZnO NP percentage in the CS films. However, the ductility of films decreased as the percentage of ZnO NPs increased. Cell attachment and cytotoxicity of the prepared films at days two and five were evaluated in vitro using osteoblasts (OBs). It was observed that OB viability decreased in films with higher than 5% ZnO NPs. This result suggests that although ZnO NPs can improve the mechanical properties of pure CS films, only a low percentage of ZnO NPs can be applied for biomedical and bioengineering applications because of the cytotoxicity effects of these particles.     

Synthesis of nanoporous Baghdadite by a modified sol-gel method and its structural and controlled release properties

In this research, a bimodal nanoporous Baghdadite (NB) (Ca3ZrSi2O9) was prepared by a modified sol-gel method using P123 as a surfactant. The effects of P123's contents on the structural and textural properties as well as the drug delivery behavior of NB were assessed in vitro. The usage of P123 offered a new route for the synthesis of NB. The synthesized NB samples with different amounts of P123 were studied through X-ray diffraction (XRD), Fourier transform infrared spectra (FTIR), N2 adsorption-desorption, field emission scanning electron microscopy (FESEM) equipped with energy-dispersive X-ray analysis spectroscopy (EDAX) and transmission electron microscopy (TEM). The results showed that a single-phase Baghdadite was obtained by this new method at the calcination temperature of 800?°C. It was found that an increase in P123's content up to 0.025?mol changed the morphology of NB samples from mountain-like to needle-like. The potential application of NB samples as drug delivery agents was assessed by estimating their release properties up to 240?h. This research revealed that the synthesized Baghdadite could be used as a potential nanoporous carrier with controlled release capability in bone tissue regeneration.     

Multiobjective invasive weed optimization: Application to analysis of Pareto improvement models in electricity markets

This paper presents a proposal for multiobjective Invasive Weed Optimization (IWO) based on nondominated sorting of the solutions. IWO is an ecologically inspired stochastic optimization algorithm which has shown successful results for global optimization. In the present work, performance of the proposed nondominated sorting IWO (NSIWO) algorithm is evaluated through a number of well-known benchmarks for multiobjective optimization. The simulation results of the test problems show that this algorithm is comparable with other multiobjective evolutionary algorithms and is also capable of finding better spread of solutions in some cases. Next, the proposed algorithm is employed to study the Pareto improvement model in two complex electricity markets. First, the Pareto improvement solution set is obtained for a three-player oligopolistic electricity market with a nonlinear demand function. Then, the IEEE 30-bus power system with transmission constraints is considered, and the Pareto improvement solutions are found for the model with deterministic cost functions. In addition, NSIWO algorithm is used to analyze this system with stochastic cost data in a risk management problem which maximizes the expected total profit but minimizes the profit risk in the market.     

Experimental investigation of the governing parameters in the electrospinning of poly(3‐hydroxybutyrate) scaffolds: Structural characteristics of the pores

We sought to determine the impact of electrospinning parameters on a trustworthy criterion that could evidently improve the maximum applicability of fibrous scaffolds for tissue regeneration. We used an image analysis technique to elucidate the web permeability index (WPI) by modeling the formation of electrospun scaffolds. Poly(3‐hydroxybutyrate) (P3HB) scaffolds were fabricated according to predetermined conditions of levels in a Taguchi orthogonal design. The material parameters were the polymer concentration, conductivity, and volatility of the solution. The processing parameters were the applied voltage and nozzle‐to‐collector distance. With a law to monitor the WPI values when the polymer concentration or the applied voltage was increased, the pore interconnectivity was decreased. The quality of the jet instability altered the pore numbers, areas, and other structural characteristics, all of which determined the scaffold porosity and aperture interconnectivity. An initial drastic increase was observed in the WPI values because of the chain entanglement phenomenon above a 6 wt % P3HB content. Although the solution mixture significantly (p < 0.05) changed the scaffold architectural characteristics as a function of the solution viscosity and surface tension, it had a minor impact on the WPI values. The solution mixture gained the third place of significance, and the distance was approved as the least important factor. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Microglial Cell Activation Increases Saturated and Decreases Monounsaturated Fatty Acid Content,but Both Lipid Species are Proinflammatory

Neuroinflammation is a component of age-related neurodegenerative diseases and cognitive decline. Saturated (SFA) and monounsaturated (MUFA) fatty acids are bioactive molecules that may play different extrinsic and intrinsic roles in neuroinflammation, serving as exogenous ligands for cellular receptors, or endogenous components of cell structural, energetic and signaling pathways. We determined the fatty acyl profile of BV2 microglial cells before and after acute activation with lipopolysaccharide (LPS). We also investigated the effect of SFA and MUFA pretreatment on the production of an invasive, neurotoxic phenotype in BV2 cells. Acute activation of BV2 microglia resulted in an increase in the relative content of SFA (12:0, 16:0, 18:0, 20:0, 22:0, and 24:0 increased significantly), and a relative decrease in the content of MUFA (16:1n7, 18:1n7, 18:1n9, 20:1n9, 24:1n9 decreased significantly). In agreement, the major stearoyl-CoA desaturase (SCD) isoform in BV2 cells, SCD2, was significantly down-regulated by LPS. We next treated cells with SFA (16:0 or 18:0) or MUFA (16:1n7 or 18:1n9), and found that levels of secreted IL6 were increased, as was secreted MMP9-mediated proteolytic activity. To test the functional significance, we treated SH-SY5Y neuronal cells with conditioned medium from BV2 cells pretreated with fatty acids, and found a small but significant induction of cell death. Our findings suggest differential intrinsic roles for SFA and MUFA in activated microglial cells, but similar extrinsic roles for these fatty acid species in inducing activation. Expansion of SFA is important during microglial cell activation, but either supplemental SFA or MUFA may contribute to chronic low-grade neuroinflammation.     

Synergistic effect of micro- and nano-TiO2 on hydrophobic,mechanical, and electrical properties of hybrid polyurethane composites

Journal of Materials Science: Materials in Electronics - One of the ways to improve the performance of ceramic insulators in polluted climates is to use polymer coatings reinforced with ceramic...