Severe hepatitis resulting from toxoplasmosis in a barred owl (Strix varia) from Québec, Canada

A female adult barred owl (Strix varia) had been hurt by a car. Its general status declined gradually within 2 wk with anorexia and inactivity. Necropsy examination revealed marked multifocal pale areas in liver, emaciation, and mild airsacculitis and pericarditis. Histopathologic examination revealed severe acute multifocal hepatic necrosis with numerous protozoal tachyzoites within necrotic foci and in the cytoplasm of hepatocytes and macrophages. These tachyzoites stained with an indirect immunohistochemistry method for Toxoplasma gondii antigens. This is the first reported case of hepatitis resulting from toxoplasmosis in a raptor.     

Analysis of different configurations of flat plate water collectors connected in series

This paper presents the analytical study of flat plate collector based on the computer‐based thermal models considering two different cases, case A (fully covered by glass) and case B (fully covered by photovoltaic (PV) module). These models are developed based on energy balance equations. An analytical expression for characteristic equation for photovoltaic–thermal flat plate collector has been derived as a function of design and climatic parameters. This paper shows the detailed analysis of energy, exergy and electrical energy by varying the number of collectors by considering four weather conditions (A, B, C and D type) for five different cities (New Delhi, Bangalore, Mumbai, Srinagar and Jodhpur) of India. It is observed that the collectors fully covered by PV module combine the production of hot water in addition to electricity generation and it is beneficial in terms of exergy, thermal energy and electrical energy gain. Copyright © 2008 John Wiley & Sons, Ltd.     

Characterization of roadway stormwater system residuals for reuse and disposal options

The chemical characterization of sediments accumulated in catch basins and stormwater ponds provides important information for assessing risks associated with management of these residuals upon removal of accumulated deposits in stormwater systems. In this study, over a period of 15 months, more than 150 residual samples were collected from 77 catch basin units and 22 stormwater ponds from 16 municipalities throughout the state of Florida. Concentrations (mg/kg) of metals and metalloids (arsenic, barium, cadmium, chromium, copper, lead, mercury, nickel, selenium, silver, and zinc) and trace organics (volatile organics, semi-volatile organics, herbicides, and pesticides) in the sediments were measured. In addition, the synthetic precipitation leaching procedure (SPLP) was utilized to evaluate pollutant leachability risk for a subset of the samples collected. Measured pollutant concentrations were compared to corresponding risk-based guidelines in Florida (i.e., Florida soil cleanup target levels) to assess potential human health risks of beneficial use of these residuals through land application. Leached concentrations were compared to risk-based water quality guidelines (i.e., Florida groundwater cleanup target levels) to examine the potential for groundwater contamination. Although several metals (arsenic, barium, chromium, copper, nickel, lead, and zinc) were routinely detected in the catch basin and stormwater pond sediments, their concentrations were generally lower than the Florida's risk-based cleanup target levels for soils. A small number of organochlorine compounds (e.g., 4,4′-DDE, 4,4′-DDT) were detected, but only in a limited number of the samples (less than 10%); leaching of trace organic pollutants above the Florida risk-based groundwater thresholds was rare. The results suggest that when land-applied or beneficially used, these residuals are not expected to pose a significant threat to human health or the environment and the results of this research will provide stormwater managers and environmental management authorities with a useful resource to examine proper disposal and beneficial use of catch basin and stormwater pond sediments.     

Low seroprevalence of Toxoplasma gondii in feral pigs from a remote island lacking cats

Serum samples from 1,264 feral pigs from Ossabaw Island, Georgia were initially screened for antibodies to Toxoplasma gondii by the modified agglutination test (MAT) using whole-formalinized tachyzoites and mercaptoethanol. Seropositive samples were also tested by the Sabin-Feldman dye test, the latex agglutination test (LAT), and the indirect hemagglutination test (IHAT). Ossabaw Island is a remote, barrier island located southeast of Savannah, Georgia. Antibodies to T. gondii were found in 11 (0.9%) of 1,264 pigs. The antibody titers were 1:20 (1 pig), 1:80 (2 pigs), 1:160 (2 pigs), 1:320 (4 pigs), and 1:640 (2 pigs) by the MAT, and 1:8 (2 pigs), 1:16 (3 pigs), 1:32 (1 pig), 1:64 (2 pigs), 1:128 (1 pig), and > or = 1:256 (2 pigs) by the Sabin-Feldman dye test. By the LAT, 5 pigs had a titer of > or = 1:64 and by the IHAT all 11 pigs had a titer of < 1:64. Antibodies (MAT titer, > or = 1:25) were found in 31 (18.2%) of 170 feral pigs from mainland Georgia. This seroprevalence on the mainland was significantly higher (P < 0.0001) as compared on Ossabaw Island. The markedly low prevalence of T. gondii on Ossabaw Island was attributed to the virtual absence of cats on the Island; only 1 domestic cat was known to be present.     

Sampling based uncertainty analysis of station blackout in PSB VVER integral test facility

Best estimate accident analysis with uncertainty evaluation is being encouraged in the present licensing scenarios of nuclear power plants. This paper deals with uncertainty and sensitivity analysis for station blackout in PSB VVER integral test facility under the framework of coordinated research project of IAEA. Nodalization was developed using best estimate system code RELAP5/MOD3.2 and its steady state and transient level qualifications are achieved. Sampling based approaches are used to carry out uncertainty and sensitivity/importance analysis. The objective of the analysis is to get confidence for uncertainty methodology by comparing with the experimental results and extend its applicability to NPPs. Uncertainty analysis is carried out by selecting nine important input parameters with specified ranges and its uniform distributions. A design matrix of 45 × 9 is generated for variations of input parameters with the Latin Hypercube Sampling and 45 code runs were taken. Linear regression was also carried out to quantify the effect of each individual input parameter on output parameters in terms of standard rank regression coefficients. Uncertainty band in output parameters is defined between 95th and 5th percentile value. It is observed that most of the experimental values and code calculated reference values are lying within the uncertainty band. For most of the parameters, width of uncertainty band increases with transient progression time.     

Thiocompounds as simulants of sulphur mustard for testing of protective barriers

The protective potential of protective devices such as respirators, suits, gloves, and overboots is widely evaluated using the standard colorimetric test (spot disc breakthrough time test, also called SD BTT) involving sulfur mustard (SM) as the challenge chemical. The vesicant nature of SM makes the test inconvenient and poses stringent safety demands. Moreover, such tests are allowed only at a limited number of facilities, causing delay in product development and supply. This prompted the present study on the search for suitable SM simulant responsive to SD BTT test. The diffusivities at BTT (D_BTT) of 10 commercially available thiocompounds through butyl rubber (IIR) were compared vis‐a‐vis D_BTT of SM. For three representative thiocompounds, namely methyl (phenyl thio)acetate, 2‐chloroethyl phenyl sulfide (2‐CEPS) and phenyl‐n‐propyl sulfide (PNPS), the transport parameters through IIR were obtained. PNPS and 2‐CEPS were further compared with respect to D_BTT in elastomers such as IIR, ethylene–propylene–diene methylene rubber, polydimethylsiloxane, nitrile rubber, polybutadiene, and natural rubber. 2‐CEPS showed generally same order of D_BTT as SM implying its potential use as a simulant. The transport parameters for various 2‐CEPS/elastomer systems were also determined. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Spectral and kinetic characterization of orange-red emitting Sr3Al2O6:Eu/Smphosphor

We report, for the first time Sm³⁺ doped nanocrystalline Sr₃Al₂O₆ phosphor. Effect of Eu³⁺ doping in the present host is also studied. XRD results match with standard data from JCPDS file confirming cubic structure with Pa3 space group. PL Maximum for Eu/Sm is obtained at 590 nm and 573 nm respectively, and corresponds to orange-red region of electromagnetic spectrum. Morphology of combustion synthesized powder is platelet, while for calcined powders, cubic shaped crystallites are obtained. Information on various trapping parameters is obtained from thermally stimulated Luminescence (TSL) studies. Non-shifting T_m property is applied to define the order of kinetics and is thereafter assumed as 1. T_m − T_stop procedure and repeated initial rise method are applied to estimate apparent activation energies and peak positions. Further, chi-square minimization procedures via computerized glow curve deconvolution (CGCD) technique provide best-fit results. The figure of merit for deconvoluted Eu and Sm doped samples are 0.48% and 0.67% respectively. The apparent activation energies for Eu doped samples are 0.89 eV, 1.05 eV, 1.30 eV, while, for Sm doped samples, the activation energies are 0.84 eV and 1.06 eV. Persistence behavior of the present phosphor is attributed to contribution due to shorter and longer components as are obtained during phosphorescence decay studies. In both the cases; probability of recombination is more in comparison to the retrapping within a quasi continuous framework of trapping sites.