Flow of materials in rotary kilns used for sponge iron manufacture: Part II. Effect of kiln geometry

The present work identifies the basic features of burden movement in a rotary kiln. The cold model study was conducted with iron ore as the feed material to determine the influence of length to diameter ratio (L/D) of a rotary kiln on the filling degree, hold-up, and residence time of the charge. An empirical equation correlating different operating variables has been derived on the basis of the experimental results. The influence of individual parameters under different conditions on the residence time and back spillage has also been evaluated. Formerly Joint Director, Research and Development, TISCO     

A semianalytic solution for rectangular plate bending

By substituting the basic function satisfying boundary conditions along two opposite edges in one direction of the plate and then using suitable transformation, the plate bending equation is reduced to an ordinary differential equation. The resulting equation is solved by finite difference technique by using a small number of discrete variables. Examples have been presented for a variety of isotropic and orthotropic elastic rectangular plate of different boundary conditions under various loadings. Excellent accuracy has been obtained.     

Studies in isodielectric media Part—I. Standard potentials of the silver—silver chloride electrode in dimethyl formamide + ethylene glycol mixtures at 25°C

Standard potentials (_sE^s) of the silver—silver chloride electrode have been determined at 25°C in some approximately isodielectric media containing ethylene glycol (EG) and 10, 30 and 50% by weight of N-N-dimethyl formamide (DMF) from emf measurements performed on the cell: H₂ (g, 1 atm)/HCl (m). solvent/AgClAg. From these values the activity coefficients (^s_sγ) of HCl at several concentration in each of the mixed solvents and the standard Gibbs energies of transfer (ΔG⁰_t) of HCl from EG to the mixed solvents have been computed. Comparison of the observed ΔG⁰_t (HCl)-composition profile with those for three other related solvent systems studied earlier, reveals that the observed profile results from the opposing effects of the larger proton-accepting and the pronounced anion-desolvating propensities of DMF and its glycolic mixtures compared to pure EG and that the increased stabilization of proton is superseded by the increased desolvation of Cl^? at higher proportions of DMF.     

Evaluation of hydroxyapatite and β-tri calcium phosphate microplasma spray coated pin intra-medullary for bone repair in a rabbit model

Here we report a comparative study of the healing kinetics of surgically created artificial defects in the tibia of New Zealand white rabbits. Comparison of the healing kinetics was made for uncoated conventional SS316L intramedullary pins, and the same pins with microplasma sprayed (MIPS) pure hydroxyapatite (HAp) and beta-tri calcium phosphate (β-TCP) coatings. After thorough material characterizations including XRD, FTIR, SEM, etc., MIPS coated pins were implanted to such animals. Serum biochemistry, radiology and fluorochrome labelling were used to evaluate the comparative healing kinetics of these implants in vivo. In comparison to those of the uncoated pins, the pins coated with both MIPS HAp and β-TCP showed significant increment of alkaline phosphatase up to 15th postoperative day, insignificant changes in serum phosphorus and calcium with uneventful healing of bone defect. There was development of Havarsian canals and well-defined peripherally placed osteoblasts along with evidence of angiogenesis and comparatively more new bone formation in the defect site. On a comparative scale, the performance of the β-TCP coated intramedullary pins was much better than that of the pure HAp coated pins than the uncoated intramedullary pins.     

Studies on the dehydration kinetics and rehydration of YAG precursor powder in the hydroxyhydrogel form

YAG precursor powder was prepared in the hydroxyhydrogel form. Dehydration kinetic study and rehydration experiment was carried out to know the behavior of water molecules and hydroxide bonds present in the hydroxyhydrogel network structure with temperature. Rate constants and activation energies for dehydration and dehydroxylation were evaluated by static thermogravimetry. Percent rehydration was determined at different heat treatment temperatures. The results obtained were explained, correlated to establish the thermal stability of hydroxyhydrogel network structure and finally supported by the FTIR analysis.     

Note-against-note two-voice counterpoint by means of fuzzy logic

In this study, we propose a fuzzy logic based approach for the ‘harmonization with constraints’ problem in music. After the mathematical modeling of the harmonization problem, the solution is carried out by means of proper fuzzy membership functions depending on the rules imposed by the music theory. To demonstrate the applicability of the proposed technique, particular problems of note-against-note two-voice counterpoint are considered. The method is flexible, adaptable and simple in terms of implementation. Moreover, from the constraint satisfaction perspective, the solutions generated by the method satisfy ‘arc-consistency’; which could not have been achieved by majority of the previous studies existing in the literature. The method also provides a gateway for the arranger/composer to incorporate his/her own stylistic preferences to the solution by simply adjusting the shapes of the membership functions. Additional features (such as providing variability in the final solutions at different executions) increase the power of the method in terms of creativity. This approach can be extended for the solution of more complicated problems in music such as orchestration, improvisation, and even composition.     

Loading Rate Effect on Nanohardness of Soda-Lime-Silica Glass

To understand how hardness, the key design parameter for applications of brittle solids such as glass concerning contact deformation, is affected by loading rate variation, nanoindentation with a Berkovich tip was used to measure the nanohardness of a 330-μm-thick soda-lime-silica glass as a function of loading rate (1 to 1000 mN·s⁻¹). The results showed for the very first time that, with variations in the loading rate, there was a 6 to 9 pct increase in the nanohardness of glass up to a threshold loading rate (TLR), whereafter it did not appreciably increase with further increase in loading rate. Further, the nanohardness data showed an indentation size effect (ISE) that obeyed the Meyer’s law. These observations were explained in terms of a strong shear stress component developed just beneath the nanoindenter and the related shear-induced deformation processes at local microstructural scale weak links. The significant or insignificant presence of shear-induced serrations in load depth plots and corresponding scanning electron microscopic evidence of a strong or mild presence of shear deformation bands in and around the nanoindentation cavity supported such a rationalization. Finally, a qualitative picture was developed for different deformation processes induced at various loading rates in glass.     

Modelling and fabrication of optimum structure of novel interdigital sensors for food inspection

Modelling of an interdigital sensor‐based sensing system for the detection of dangerous contaminated marine biotoxin in seafood has been carried out. Three interdigital sensors having new electrode configurations have been analysed using COMSOL Multiphysics. All sensors were designed to have an equal number of electrodes with the same sensing area. Based on the maximum sensitivity, the best electrode configuration has been chosen. Experiments on raw seafood contaminated with domoic acid have been conducted using the new fabricated sensor and very good results were obtained. Copyright © 2011 John Wiley & Sons, Ltd.     

An Improved Harmonic Load Flow Formulation

Abstract

The paper contributes an improved harmonic load flow formulation with fewer convergence problems but the same accurate results as traditional formulations. The proposed formulation approaches the harmonic load flow problem as a single nonlinear equation system where the harmonic bus voltage influence on nonlinear load behavior is considered and harmonic bus voltages at linear buses are not included as unknowns. This formulation allows any sort of nonlinear load to be considered and uses the Newton-Raphson method with true Jacobian matrix to reduce the inherent increase in the number of iterations caused by the presence of highly distorted bus voltages. The numerical results obtained when solving a three-bus network operating under highly distorted bus voltages using traditional harmonic load flow formulations and the improved formulation are comparatively discussed.