Electrical and photocurrent characteristics of Au/PVA (Co-doped)/n-Si photoconductive diodes

In this work, we investigate the some main electrical and photocurrent properties of the Au/PVA(Co-doped)/n-Si diodes by using current–voltage (I–V) measurements at dark and various illumination intensity. Two types of diodes with and without polyvinyl alcohol (PVA) (Co-doped) polymeric interfacial layer were fabricated and measured at room temperature. Results show that the polymeric interfacial layers and series resistance (R_s) strongly affect the main electrical parameters of these structures. Also, metal/polymer/semiconductor (MPS) diode with PVA (Co-doped) interfacial organic layer is very sensitive to the light such that the current in reverse bias region increase by 10³–10⁴ times with the increasing illumination intensity. The open circuit voltage V_oc and short-circuit current I_sc values of this MPS diode under 100 mW/cm² illumination intensity were found as 0.28 V and 19.3 μA, respectively.     

A receding contact problem between a functionally graded layer and two homogeneous quarter planes

In this paper, the plane problem of a frictionless receding contact between an elastic functionally graded layer and two homogeneous quarter planes is considered when the graded layer is pressed against the quarter planes. The top of the layer is subjected to normal tractions over a finite segment. The graded layer is modeled as a non-homogeneous medium with a constant Poisson’s ratio and exponentially varying shear modules. The problem is converted into the solution of a Cauchy-type singular integral equation in which the contact pressure and the receding contact half-length are the unknowns using integral transforms. The singular integral equation is solved numerically using Gauss–Jacobi integration. The corresponding receding contact half-length that satisfies the global equilibrium condition is obtained using an iterative procedure. The effect of the material non-homogeneity parameter on the contact pressure and on the length of the receding contact is investigated.     

On operations of soft sets

Soft set theory, proposed by Molodtsov, has been regarded as an effective mathematical tool to deal with uncertainties. In this paper, first we prove that certain De Morgan’s law hold in soft set theory with respect to different operations on soft sets. Then, we discuss the basic properties of operations on soft sets such as intersection, extended intersection, restricted union and restricted difference. Moreover, we illustrate their interconnections between each other. Also we define the notion of restricted symmetric difference of soft sets and investigate its properties. The main purpose of this paper is to extend the theoretical aspect of operations on soft sets.     

Performance analysis of a multihop relay network using distributed Alamouti code

Wireless Networks - In this paper, we apply the classical Alamouti coding technique in a distributed and cascaded fashion to multihop relay networks where relays perform the decode-and-forward (DF)...     

Environmental flow assessment for energy generation sustainability employing different hydraulic evaluation methods: Çambaşi hydropower plant case study in Turkey

The operating principle of hydroelectric power plants (HPP) is based on utilizing the potential energy of water, which constitutes the basic component of the plant. In other words, water is crucially important in energy production in hydroelectric power plants. The importance of water is not only limited to the energy production, but also can affect directly or indirectly all living things in the water basin. This study deals with the methods of determining the environmental flow, which will not damage the integrity of the rivers and the ecosystem in HPPs, together with enabling the sustainable electricity production as an indirect result. Suggestions are made for determining the environmental flow for Çambas? regulator and Hydropower plant, a run-of-river type power plant in Turkey, after reviewing commonly used methods all over the world. Tennant, Tessmann, and flow duration curve methods were used in determining the environmental flow. Separate calculations were carried out for Cambas? and Ogene regulators, which constitute the hydropower plant. The calculated values were compared with the normal (regime) flow rates and project flow values. As a result, Tessmann method, one of the hydrological based environmental flow determination methods, and good category of Tennant method, 20 % of annual average flow in dry period and 40 % of annual average flow in wet period, are proposed for Çamba?? HPP.     

Buffer effects on the mosaic structure of the HR-GaN grown on 6H-SiC substrate by MOCVD

High-resistive GaN (>10⁸ Ω cm) layers have been grown with different buffer structures on 6H-SiC substrate using metalorganic chemical vapor deposition reactor. Different combination of the GaN/AlN super lattice, low temperature AlN, high temperature AlN and Al_xGa_1?xN (x ≈ 0.67) layers were used in the buffer structures. The growth parameters of the buffer layers were optimized for obtaining a high-resistive GaN epilayer. The mosaic structure parameters, such as lateral and vertical coherence lengths, tilt and twist angle (and heterogeneous strain), and dislocation densities (edge and screw dislocations) of the high-resistive GaN epilayers have been investigated using x-ray diffraction measurements. In addition, the residual stress behaviors in the high-resistive GaN epilayers were determined using both x-ray diffraction and Raman measurements. It was found that the buffer structures between the HR-GaN and SiC substrate have been found to have significant effect on the surface morphology and the mosaic structures parameters. On the other hand, both XRD and Raman results confirmed that there is low residual stress in the high-resistive GaN epilayers grown on different buffer structures.