Change in GPC elution volume of polymers by adsorption onto porous glass as column packing

The elution volume of polystyrene or of poly(ethylene glycol) of various molecular weights was measured in both tetrahydrofuran and benzene at 40 or 60°C by means of gel permeation chromatography utilizing columns packed with crosslinked polystyrene gel or porous glass. When the polystyrene gel was used as the column packing, a relationship between log [η]M and the peak elution volume for polystyrene agreed with that for poly(ethylene glycol). Using columns packed with glass, however, the elution volume of polystyrene was smaller than that of poly(ethylene glycol) at the same log [η]M. The results are considered to be attributable to the adsorption of poly(ethylene glycol) onto the glass. The effect of the adsorption on the elution volume was evaluated by assuming a universal calibration for columns containing porous glass; the deviation of the elution volume from the universal calibration curve increased with increase in molecular weight. At lower temperatures, even polystyrene was adsorbed onto the glass. Therefore, to reduce the adsorption of polymers on glass, it is necessary to increase the temperature or use surface treatment when porous glass is used as a GPC column packing.     

Role of support in reforming of CH4 with CO2 over Rh catalysts

The reforming of CH₄ with CO₂ over supported Rh catalysts has been studied over a range of temperatures (550–1000 K). A significant effect of the support on the catalytic activity was observed, where the order was Rh/Al₂O₃>Rh/TiO₂>Rh/SiO₂. The catalytic activity of Rh/SiO₂ was promoted markedly by physical mixing of Rh/SiO₂ with metal oxides such as Al₂O₃, TiO₂, and MgO, indicating a synergetic effect. The role of the metal oxides used as the support and the physical mixture may be ascribed to the promotion in dissociation of CO₂ on the surface of Rh, since the CH₄ + CO₂ reaction is first order in the pressure of CO₂, suggesting that CO₂ dissociation is the rate-determining step. The possible model of the synergetic effect was proposed.     

Terahertz time domain attenuated total reflection spectroscopy with an integrated prism system

We demonstrated attenuated total reflection (ATR) spectroscopy with an integrated prism system that included a terahertz emitter, a terahertz receiver, and an ATR prism. The ATR prism had two internal off-axis parabolic mirrors for, respectively, collimating and focusing the terahertz waves. The Fresnel loss at each interface was reduced, and the total propagation efficiency was 3.36 times larger than when using a non-integrated prism system. The refractive index of water samples calculated from the experimental data showed good agreement with values reported in the literature.     

Zinc as an essential trace element in the acceleration of matrix vesicles-mediated mineral deposition

BACKGROUND: Zinc (Zn) has a potent stimulatory effect on osteoblastic bone formation and an inhibitory effect on osteoclastic bone resorption. PURPOSE: The effect of Zn on the function of matrix vesicles (MVs) remains controversial. The purpose of this study was to investigate the effect of Zn on alkaline phosphatase (ALP) activity of osteoblasts and in the initial biological MVs‐mediated mineral deposition. STUDY DESIGN: Osteoblasts were treated with varying concentrations of Zn dissolved in culture medium. After three, five, and seven days of culture, ALP activity was assayed. For the detection of a low level of calcium concentration in MVs, X‐ray fluorescence (XRF) analyses were applied. The effect of Zn for the transformation of calcium phosphate was analyzed using a scanning electron microscope fitted with an energy dispersive X‐ray microanalysis (EDX) system. RESULTS: The ALP activity of osteoblasts in culture medium supplemented with 1 × 10^?5M of Zn was significantly increased at both five and seven days. XRF data demonstrated higher levels of calcium concentration over time in the Zn‐supplemented group. EDX data showed that mineral deposits beginning on day 3 were transformed from whitlockite to calcium phosphate near hydroxyapatite, and that Zn accelerated this transformation. CONCLUSIONS: The proper concentration of Zn increased the ALP activity of osteoblasts after five and seven days of incubation. The present XRF and EDX data suggest that the increase of mineral deposition with Zn exposure for one to five days might be mediated by the activation of ALP and calcium‐binding proteins. Microsc. Res. Tech., 2011. © 2011 Wiley Periodicals, Inc.     

Evaluation method to determine radial accuracy of high-precision rotating spindle units

In this paper, the authors present a new technique, called the vector indication method, which computes and illustrates the radial error motion of a rotating spindle as the instantaneous vectors on a plane normal to a spindle axis. The radial error motion is measured by two sensors located perpendicularly to each other. A new algorithm is developed to obtain the instantaneous vectors of spindle axis displacement by digital processing. It is revealed that the behavior of displacement of spindle axis can be more precisely known by the vector indication method than by “the Lissajous' figure,” which is one of the conventional methods.     

<Emphasis Type="Italic">In Situ</Emphasis> Study of Reduction Process of CuO Paste and Its Effect on Bondability of Cu-to-Cu Joints

A bonding method utilizing redox reactions of metallic oxide microparticles achieves metal-to-metal bonding in air, which can be alternative to lead-rich high-melting point solder. However, it is known that the degree of the reduction of metallic oxide microparticles have an influence on the joint strength using this bonding method. In this paper, the reduction behavior of CuO paste and its effect on Cu-to-Cu joints were investigated through simultaneous microstructure-related x-ray diffraction and differential scanning calorimetry measurements. The CuO microparticles in the paste were gradually reduced to submicron Cu₂O particles at 210–250°C. Subsequently, Cu nanoparticles were generated instantaneously at 300–315°C. There was a marked difference in the strengths of the joints formed at 300°C and 350°C. Thus, the Cu nanoparticles play a critical role in sintering-based bonding using CuO paste. Furthermore, once the Cu nanoparticles have formed, the joint strength increases with higher bonding temperature (from 350°C to 500°C) and pressure (5–15 MPa), which can exceed the strength of Pb-5Sn solder at higher temperature and pressure.     

Atomically resolved imaging by low-temperature frequency-modulation atomic force microscopy using a quartz length-extension resonator

Low-temperature ultrahigh vacuum frequency-modulation atomic force microscopy (AFM) was performed using a 1 MHz length-extension type of quartz resonator as a force sensor. Taking advantage of the high stiffness of the resonator, the AFM was operated with an oscillation amplitude smaller than 100 pm, which is favorable for high spatial resolution, without snapping an AFM tip onto a sample surface. Atomically resolved imaging of the adatom structure on the Si(111)-(7x7) surface was successfully obtained.     

DNA Computing Boosted by a Cationic Copolymer

The huge information storage capability of DNA and its ability to self‐assemble can be harnessed to enable massively parallel computing in a small space. DNA‐based logic gates are designed that rely on DNA strand displacement reactions; however, computation is slow due to time‐consuming DNA reassembly processes and prone to failure as DNA is susceptible to degradation by nucleases and under certain solution conditions. Here, it is shown that the presence of a cationic copolymer boosts the speed of DNA logic gate operations that involve multiple and parallel strand displacement reactions. Two kinds of DNA molecular operations, one based on a translator gate and one on a seesaw gate, are successfully enhanced by the copolymer without tuning of computing conditions or DNA sequences. The copolymer markedly reduces operation times from hours to minutes. Moreover, the copolymer enhances nuclease resistance.     

Oral Secretions Affect HIPVs Induced by Generalist (<Emphasis Type="Italic">Mythimna loreyi</Emphasis>) and Specialist (<Emphasis Type="Italic">Parnara guttata</Emphasis>) Herbivores in Rice

Plants synthesize variable mixtures of herbivore-induced plant volatiles (HIPVs) as part of their evolutionary conserved defense. To elucidate the impact of chewing herbivores with different level of adaptation on HIPV profiles in rice, we measured HIPVs released from rice seedlings challenged by either the generalist herbivore Mythimna loreyi (MYL) or the specialist Parnara guttata (PAG). Both herbivores markedly elicited the emission of HIPVs, mainly on the second and third days after attack compared to control plants. In addition, side-by-side HIPV comparisons using MYL and PAG caterpillars revealed that generalist feeding induced comparably more HIPVs relative to specialist, particularly on day two as highlighted by multivariate analysis (PLS-DA) of emitted HIPVs, and further confirmed in mimicked herbivory experiments. Here, mechanically wounded plants treated with water (WW) released more VOCs than untreated controls, and on top of this, oral secretions (OS) from both herbivores showed differential effects on volatile emissions from the wounded plants. Similar to actual herbivory, MYL OS promoted higher amounts of HIPVs relative to PAG OS, thus supporting disparate induction of rice indirect defenses in response to generalist and specialist herbivores, which could be due to the differential composition of their OS. (196 words).     

Pilot-Scale Operation of a Concrete Sludge Recycling Plant and Simultaneous Production of Calcium Carbonate

A pilot-scale plant to treat concrete sludge and produce calcium carbonate (CaCO₃) and an environmental purification agent (phosphorus adsorbent derived from concrete sludge, PAdeCS®) was designed, constructed, and operated. Concrete sludge from a concrete pile and pole production plant, boiler gas containing CO₂, and groundwater were used in the plant. The process involved calcium extraction from concrete sludge into water, followed by reaction of the calcium with CO₂ to produce crystalline CaCO₃. The pilot-scale plant was operated for 1 week, and the mass flows, conversion of CO₂ to CaCO₃, and net CO₂ emissions of the process were estimated. High-purity CaCO₃ (>97%) suitable for industrial use was obtained. Based on the power consumption of the process and the amount of CO₂ sequestered into CaCO₃, a net reduction in CO₂ emissions can be achieved using this process. The produced PAdeCS can be used as an inexpensive substitute for calcium series environmental purification agents.