Determination of Thermoelectric Module Efficiency: A Survey

The development of thermoelectrics (TE) for energy conversion is in the transition phase from laboratory research to device development. There is an increasing demand to accurately determine the module efficiency, especially for the power generation mode. For many TE, the figure of merit, ZT, of the material sometimes cannot be fully realized at the device level. Reliable efficiency testing of thermoelectric modules is important to assess the device ZT and provide end-users with realistic values for how much power can be generated under specific conditions. We conducted a general survey of efficiency testing devices and their performance. The results indicated a lack of industry standards and test procedures. This study included a commercial test system and several laboratory systems. Most systems are based on the heat flow meter method, and some are based on the Harman method. They are usually reproducible in evaluating thermoelectric modules. However, different systems often showed large differences that are likely caused by uncertain heat loss and thermal resistance. Efficiency testing is an important capability for the thermoelectric community to improve. A follow-up international standardization effort is planned.     

Optical manipulation of multiple stable states in photorefractive four-wave mixing

Abstract

We propose an approach to manipulate the convergence in multiple solutions of phase conjugate reflectivity in photorefractive four-wave mixing. Although a method forcibly adding a π-phase shift to an incident beam has been already proposed to control the reflectivity, some restrictions have been required in the boundary conditions for the successful operation. Here, we control the reflectivity with the boundary conditions in which the phase shift operation is ineffective by itself. In our method, the phase shift operation is combined with the procedure of turning an incident beam on and off. With a numerical analysis of four-wave mixing, we show that our new approach brings drastic change in the spatial distribution of the index grating and leads the phase conjugate reflectivity which was not manipulated previously.     

Modeling of quantitative relationships between physicochemical properties of active pharmaceutical ingredients and tensile strength of tablets using a boosted tree

Objectives: The aim of this study was to explore the potential of boosted tree (BT) to develop a correlation model between active pharmaceutical ingredient (API) characteristics and a tensile strength (TS) of tablets as critical quality attributes.

Methods: First, we evaluated 81 kinds of API characteristics, such as particle size distribution, bulk density, tapped density, Hausner ratio, moisture content, elastic recovery, molecular weight, and partition coefficient. Next, we prepared tablets containing 50% API, 49% microcrystalline cellulose, and 1% magnesium stearate using direct compression at 6, 8, and 10?kN, and measured TS. Then, we applied BT to our dataset to develop a correlation model. Finally, the constructed BT model was validated using k-fold cross-validation.

Results: Results showed that the BT model achieved high-performance statistics, whereas multiple regression analysis resulted in poor estimations. Sensitivity analysis of the BT model revealed that diameter of powder particles at the 10th percentile of the cumulative percentage size distribution was the most crucial factor for TS. In addition, the influences of moisture content, partition coefficients, and modal diameter were appreciably meaningful factors.

Conclusions: This study demonstrates that BT model could provide comprehensive understanding of the latent structure underlying APIs and TS of tablets.     

Well‐defined,environment‐friendly synthesis of polypeptides based on phosgene‐free transformation of amino acids into urethane derivatives and their applications

In this study, both naturally occurring and artificial amino acids were successfully transformed into the corresponding urethane derivatives using diphenyl carbonate. The urethanes thus prepared could be efficiently cyclized into amino acid N‐carboxyanhydrides (NCAs) without the requirement of phosgene. In addition, the presence of primary amines converted the urethane derivatives into NCAs and initiated the ring‐opening polymerization of the in situ formed NCAs, allowing for the well‐defined synthesis of polypeptides. These polypeptides contained initiating ends functionalized by an amine‐derived residue and propagating ends bearing the reactive amino group. By precise control of the structures of the polypeptides, various polypeptide conjugates such as block copolymers and graft copolymers were successfully synthesized as designed, and their applications in antifouling coatings against proteins, drug delivery systems and biosensors were demonstrated. © 2019 Society of Chemical Industry     

Estimation of anisotropic properties of nano-structured arrays by modal vibration control at microscale

Nano-structured arrays are engineered to meet the requirements of a variety of applications such as microfilters, sensors, and structural interface due to their unique mechanical characteristics, which cannot be achieved by conventional solid materials. However, it is hard to evaluate the elastic properties of nano-structured arrays owing to the discrete structure, sample size, and availability of suitable techniques. To facilitate this, we develop an advanced three-dimensional microscale vibration testing process. In the test, a specially designed three-dimensional microspecimen with tuned mass is excited by a piezoelectric actuator, and the resonance frequencies are detected by a laser device successfully. The anisotropic elastic moduli of nano-structured array composed of helical nano-springs are identified from a single spectrum. This array shows so strong characteristic anisotropy that the solid one hardly can attain. The microscale testing technique can be extended to other materials and microstructures.     

A Method for Reducing the Dead‐Time Voltage and Impedance Voltage in a Series Voltage Compensator

Many research groups are developing series voltage compensators. In a series converter, since a transformer is used in series in the power system, the power system current flows into the voltage source inverter through the transformer. The inverter current, which is determined by the transformation ratio, gives rise to an error voltage that consists of a dead‐time voltage and an impedance voltage. The error voltage is generated even when the reference voltage is zero. This paper describes the mechanism by which the error voltage occurs and proposes a method for reducing the error voltage. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 85–93, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22333     

Effect of annealing on photovoltaic properties and microstructure of conventional and inverted organic solar cells using active bilayer based on liquid‐crystal semiconducting polymer and fullerene

Conventional and inverted organic solar cells of poly[9,9‐dioctyl‐fluorene‐co‐bithiophene] (F8T2) as liquid‐crystal semiconducting polymer and fullerene as electron acceptor were fabricated and characterized. An effect of thermal treatment of the films on annealing condition near glass transition was investigated for tuning optimization and improving the photovoltaic and optical properties. Annealing treatment below the glass transition improved the photovoltaic performance and carrier diffusion in crystal growth of active layer. The X‐ray diffraction patterns indicate a crystalline structure with molecular order of F8T2 in crystal index, 100 as a layer distance between sheets of F8T2 chains. The photovoltaic properties were based on molecular interactions with molecular ordering in active layer at crystal state. As the photovoltaic mechanisms, the F8T2 thin film as p‐type semiconducting polymer worked for electron‐donor layer to support light‐induced generation, carrier diffusion and charge transfer near interface in active layer. Copyright © 2014 John Wiley & Sons, Ltd.     

Magnetovolume effects in manganese nitrides with antiperovskite structure

Magnetostructural correlations in antiperovskite manganese nitrides were investigated systematically for stoichiometric and solid solution Mn₃Cu_1?xA_xN (A = Co, Ni, Zn, Ga, Ge, Rh, Pd, Ag, In, Sn or Sb). This class of nitrides is attracting great attention because of their giant negative thermal expansion, which is achieved by doping Ge or Sn into the A site as a relaxant of the sharp volume contraction on heating (spontaneous volume magnetostriction ω_s) because of the magnetovolume effects. The physical background of large ω_s and mechanism of how the volume contraction becomes gradual with temperature are central concerns for the physics and applications of these nitrides. An entire dataset of thermal expansion, crystal structure and magnetization demonstrates that the cubic triangular antiferromagnetic state is crucial for large ω_s. The intimate relationship between ω_s and the magnetic structure is discussed in terms of geometrical frustration related to the Mn₆N octahedron and magnetic stress concept. The results presented herein also show that ω_s depends on the number of d electrons in the A atom, suggesting the important role of the d orbitals of the A atom. Not all the dopants in the A site, but the elements that disturb the cubic triangular antiferromagnetic state, are effective in broadening the volume change. This fact suggests that instability neighboring the phase boundary is related to the broadening. The relation between the gradual volume change and the local structure anomaly is suggested by recent microprobe studies.     

Control strategy for a distributed DC power system with renewable energy

This paper deals with a DC-micro-grid with renewable energy. The proposed method is composed of a gearless wind power generation system, a battery, and DC loads in a DC distribution system. The battery helps to avoid the DC over-voltages by absorbing the power of the permanent magnet synchronous generator (PMSG) during line-fault. In addition, the control schemes presented in this paper including the maximum power point tracking (MPPT) control and a pitch angle control for the gearless wind turbine generator. By means of the proposed method, high-reliable power can be supplied to the DC distribution system during the line-fault and stable power supply from the PMSG can be achieved after line-fault clearing. The effectiveness of the proposed method is examined in a MATLAB/Simulink^® environment.