Grazing-incidence wide-angle X-ray diffraction study on molecular aggregation state of imprinted polyimide film before and after hard baking

Nanoimprint lithography (NIL) was carried out on precursor of polyimide (PI), poly(amic acid) film, and then hard baking to obtain imprinted PI film. The molecular aggregation states of imprinted PI films before and after hard baking were investigated by grazing-incidence wide-angle X-ray diffraction comparing with the one of flat PI film. It was found that NIL and hard baking can strongly affect the molecular aggregation states of PI film. Before hard baking, PI chain is aligned parallel to the line direction on the line. After hard baking, the alignment in ordered domain was changed to that the PI molecule of which chain axis is perpendicular to the line direction is significantly increased, while, PI molecule of which chain axis is parallel to the line direction is decreased after hard baking. Through comparing with the flat PI, crystallinity of imprinted PI film has been significantly enhanced.     

Increased Lipid Synthesis and Decreased β-Oxidation in the Liver of SHR/NDmcr-cp (cp/cp) Rats, an Animal Model of Metabolic Syndrome

SHR/NDmcr-cp (cp/cp) rats (SHR/NDcp) are an animal model of metabolic syndrome. A previous study of ours revealed drastic increases in the mass of palmitic (16:0), oleic (18:1n-9), palmitoleic (16:1n-7), cis-vaccenic (18:1n-7) and 5,8,11-eicosatrienoic acids in the liver of SHR/NDcp. However, detailed information on the class of lipid accumulated and the mechanism responsible for the overproduction of the accumulated lipid in the liver was not obtained. This study aimed to characterize the class of lipid accumulated and to explore the mechanism underlying the lipid accumulation in the liver of SHR/NDcp, in comparison with SHR/NDmcr-cp (+/+) (lean hypertensive littermates of SHR/NDcp) and Wistar Kyoto rats. In the liver of SHR/NDcp, de novo synthesis of fatty acids (16:0, 18:1n-9 and 16:1n-7) and triacylglycerol (TAG) synthesis were up-regulated and fatty acid β-oxidation was down-regulated. These perturbations of lipid metabolism caused fat accumulation in hepatocytes and accumulation of TAG, which were enriched with 16:0, 18:1n-9 and 16:1n-7, in the liver of SHR/NDcp. On the other hand, no changes were found in hepatic contents of diacylglycerol and unesterified fatty acid (FFA); among FFA, there were no differences in the hepatic concentrations of unesterified 16:0 and stearic acid between SHR/NDcp and two other groups of rats. Moreover, little change was brought about in the expression of genes responsive to endoplasmic reticulum stress in the liver of SHR/NDcp. These results may reinforce the pathophysiological role of stearoyl-CoA desaturase 1 and fatty acid elongase 6 in the liver of SHR/NDcp.     

The surface condition effect of Cu2O flower/grass-like nanoarchitectures grown on Cu foil and Cu film

Cu₂O flower/grass-like nanoarchitectures (FGLNAs) were fabricated directly on two category specimens of Cu foils and Cu film using thermal oxidation method. The FGLNAs are approximately 3.5 to 12 μm in size, and their petals are approximately 50 to 950 nm in width. The high compressive stress caused by a large oxide volume in the Cu₂O layer on the specimen surface played an important role in the growth of FGLNAs. The effects of surface conditions, such as the surface stresses, grain size, and surface roughness of Cu foil and Cu film specimens, on the FGLNA growth were discussed in detail.

PACS

81. Materials science; 81.07.-b Nanoscale materials and structures: fabrication and characterization; 81.16.Hc Catalytic methods     

Mating Communication Systems of Four Plusiinae Species Distributed in Japan: Identification of the Sex Pheromones and Field Evaluation

The sex pheromones of four Plusiinae species in the family Noctuidae, Ctenoplusia albostriata (CA), Macdunnoughia purissima (MP), Syngrapha ain (SA), and Diachrysia stenochrysis (DS) were identified by GC-EAD and GC-MS analyses. These were subsequently evaluated by a series of field trials in different ecological habitats. CA females produced (Z)-5-decenyl acetate (I), (Z)-7-dodecenyl acetate (II), and (Z)-7-dodecen-1-ol (III) in a ratio of 2:100:13. While the antennae of CA males responded to all three components, neither I nor III was essential to capture males. The MP females produced II, III, and (Z)-5-dodecenyl acetate (IV) in a ratio of 100:80:20, and this blend captured the most MP males. Compounds II and III were also identified from SA females, and mixtures ranging from 4:1 to 2:3 were equally attractive to males. DS females only produced one active compound, (Z)-7-decenyl acetate (V), and DS is the first Plusiinae species identified as using only the ω3-compound and none of ω5-compounds, such as II and III, which are common components of Plusiinae pheromones. Using previously published chemical and biosynthetic data, together with the finding from this study, we propose a classification of the Plusiinae sex pheromones.     

Preparation of mesoporous silica replica using ordered mesoporous carbon by vapor phase transport of silica source

A new vapor phase transport (VPT) technique to prepare an inverse silica replica of an ordered mesoporous carbon was developed. Tetraethyl orthosilicate (TEOS) was infiltrated in mesoporous carbon CMK-3 as the hard template at 180 °C for 48 h under an autogenous pressure in an autoclave in the presence of water. The samples obtained by removal of CMK-3 retained structural regularity of CMK-3 with little shrinkage of framework, which were characterized by SAXRD, N₂ adsorption, TG-DTA, and SEM. Influence of preparation temperature on the loading amount of silica was investigated. The multi-step replication process was monitored by characterizing the replicated materials as well as intermediate composites.     

Preparation of carbon-based transparent and conductive thin films by pyrolysis of silylated graphite oxides

Thin films of silylated graphite oxide were obtained from a chloroform/cyclohexane dispersion of n-hexadecylamine-intercalated silylated graphite oxide by a casting method at a low temperature. Carbon-based thin films were obtained from the pyrolysis of the resulting films under a reduced pressure at 500 °C or higher temperatures. The resulting samples were well adhered to the substrate because of the presence of silicon containing species as a “glue”. The resistivity decreased with an increase in the film thickness or a decrease in the transparency. Based on the data obtained for the samples prepared from graphite with different particle sizes and graphite oxide with different oxygen contents, the conduction of the electrons within each carbon sheet seemed important for large film thickness and conduction through the boundary seemed important when the film thickness was small. A low sheet resistance of 3.7 kΩ/sq for 80% of transmittance was achieved, when graphite oxide with a lower oxygen content was prepared from graphite with smaller particle sizes and the precursor film was heated at 500 °C. At 900 °C, it further decreased to a value of 700 Ω/sq.     

Synthesis of Polypeptide-Polyether Conjugates from an Activated Urethane Derivative of γ-Benzyl-L-glutamate as a Monomer

N-(4-Nitrophenoxycarbonyl)-γ-benzyl-L-glutamate (1) was heated at 60 °C in N,N-dimethylacetoamide (DMAc) in the presence of p-(tert-butyl)phenylmethylamine (2) to afford poly(γ-benzyl-L-glutamate) in high yield. ¹H NMR analysis of the obtained polymer revealed that the p-(tert-butyl)phenylmethyl group was successfully introduced into the polymer chain end. Under the same conditions, polycondensations of 1 in the presence of poly(ethylene glycol)s having amino terminals were performed. Both of the components were consumed quantitatively to afford the corresponding block copolymers having poly(γ-benzyl-L-glutamate) and poly(ethylene glycol) segments. The molecular weights of the copolymers were controlled by the feed ratio [1]₀/[amino group in the macroinitiator]₀. Electronic Supplementary Material  The online version of this article at contains supplementary material, which is available to authorized users.     

A study on the optimal fabrication method for micro-scale gyroscopes using a hybrid process consisting of electric discharge machining,chemical etching or micro-mechanical milling

For productive manufacturing of an accurate small-scale wine-glass gyroscope, a hybrid fabrication process consisting of either electric discharge machining, chemical etching, or micro-mechanical milling have been proposed. A comparison of silicon cavity fabrication processes has been conducted in terms of productivity, quality and geometrical accuracy, aiming at the use of the cavity as a mold for creating a thin wall diamond hemisphere, which is the main component of a wine-glass gyroscope. The results have shown that the EDM process, combined with chemical etching, can yield the highest productivity but with limited shape accuracy. The use of mechanical micro-milling, while less productive than EDM and etching, produces a superior quality and geometric accuracy.     

Production of (S)-4-chloro-3-hydroxybutyrate by microbial resolution using hydrolase from Rhizobium sp. DS-S-51

(S)-4-Chloro-3-hydroxybutyrate (CHB) is essential for the synthesis of biologically and pharmacologically important compounds. Rhizobium sp. DS-S-51 isolated from soil samples showed hydrolytic activity toward (R)-CHB in the racemate to (R)-3-hydroxy-gamma-butyrolactone (HL) under a simple composition of the reaction. Residual (S)-CHB was obtained with high optical purity. The gene encoding the enzyme concerned, designated CHB hydrolase, was isolated from DS-S-51, and the gene was highly expressed in Escherichia coli JM109. When the resolution of racemic methyl CHB (CHBM) as a substrate was performed using this recombinant cell, JM109 (pKK-R1), the hydrolytic activity was found to be 40-fold greater than that of DS-S-51, and the maximum concentration of the substrate added increased 2-fold. Moreover, (R)-HL was also obtained without decreasing the optical purity compared with that when (R)-CHBM was used as a substrate.     

A novel l-amino acid ligase from bacillus licheniformis

l-Amino acid alpha-ligase (EC 6.3.2.28) catalyzed formation of alpha-peptide bond in unprotected l-amino acids in an ATP-dependent manner. BL00235 gene in Bacillus licheniformis NBRC12200 coded as a new l-amino acid ligase. BL00235 substrate specificity was strict; only methionine or leucine was acceptable as dipeptide N-terminal residues.