Photo-induced transformations in amorphous chalcogenide nano-multilayers

Photo-stimulated interdiffusion in a-Se/As₂S₃ amorphous chalcogenide nano-multilayers (ANML) is known as a useful method for amplitude-phase optical relief formation besides the known amorphous–amorphous or amorphous–crystalline photo-induced structural transformations (PST) in homogeneous chalcogenide layers, but it has a relatively narrow sensitivity spectral range and small amplitude modulation. Experimental evidences of improvement of optical recording processes were obtained in Te-, Bi-, Sb-containing nano-layered structures based on As₂S₃ matrix. The influence of nano-structuring and combination of components on the sensitivity, type of the recorded relief is discussed.     

The coding and effector transfer of movement sequences.

Three experiments utilizing a 14-element arm movement sequence were designed to determine if reinstating the visual–spatial coordinates, which require movements to the same spatial locations utilized during acquisition, results in better effector transfer than reinstating the motor coordinates, which require the same pattern of homologous muscle activation. Results demonstrated better transfer when visual–spatial coordinates were reinstated than when motor coordinates where reinstated regardless of the amount of practice (1, 4, or 12 days; Experiments 1–3, respectively). Transfer (left to right and right to left) was symmetric when visual–spatial coordinates were reinstated but not when motor coordinates were reinstated. When motor coordinates were reinstated after 12 days of practice and vision occluded, transfer was better from right limb to left than vice versa. The data are also consistent with the notion that multiple codes (visual, spatial, and motor) are developed over practice, with each contributing to transfer performance when the respective coordinates are reinstated. Further, the results indicate a disruption of the linkage (concatenation) between subsequences when one or more coordinates are changed on the transfer test. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Measurement of intraparticle diffusion in reversed phase liquid chromatography

The intraparticle diffusion coefficient was measured using a method based on the fitting of a set of experimental chromatographic profiles to the lumped pore diffusion model. For this purpose, both the analytical solution of the model in the Laplace domain and a numerical method were used. There was an excellent agreement between the results given by the two methods. These results are compared to those obtained by moment analysis of the same set of chromatographic profiles and by the determination of the intraparticle diffusion coefficient from the second central moment of these bands. Nearly identical results were obtained with these two independent methods. The values of the intraparticle diffusion coefficient, D_e, for rubrene in pure methanol was found to be by the modeling method and by the moment analysis method. These values increase with increasing water concentration, to 1.10×10⁻⁶ and , respectively, in a methanol/water solution and to 1.63×10⁻⁶ and , respectively, in a solution.These results confirm the validity and the consistency of the lumped pore model and the moment analysis theory. They show that both approaches describe correctly the mass transfer kinetics in the particles of packing material during the chromatographic process. Systematic determinations of the intraparticle diffusion coefficient can now be undertaken and the influence of various experimental parameters on this important property of packing materials can be investigated.     

Decoding two-dimensional complex multicomponent separations by autocovariance function

A new method for decoding two-dimensional (2D) multicomponent separations based on the use of the 2D Autocovariance function (2D-ACVF) has been developed. Theoretical models of single component (SC) spot distributions in 2D separations, both random and structured, are developed as the basis for a nonlinear estimation of both sample and separation system parameters from experimental 2D separations. The number of SCs, the average spot size, the spot capacity, and the saturation factor can be evaluated in the case of random SC spot patterns. The procedure was validated by extensive numerical simulation under conditions close to those usually found in GC x GC or 2D-polyacrylamid gel electrophoresis of proteins. The worse precision degree was no greater than 10% in the case of maximum spot density. This imprecision was fully accounted for, and it seems acceptable owing to the intrinsic statistical character of the estimation method. Structured multicomponent 2D separations, where SCs are linked by linear relationships, give rise to specific structured patterns in 2D-ACVF plots from which the parameters (phase and frequency) of the structured SC sequences can be evaluated: the study of 2D-ACVF makes it possible to decode multicomponent 2D separation, that is, to determine the number, relative abundance, and structural similarities of the single components. Pertinent expressions of the theoretical 2D-ACVF were derived for simple cases, and a procedure for decoding cases of structured 2D separations was developed and applied. It was shown that 2D separations containing both random and structured patterns of SC spots give rise to 2D-EACVF, which is the superimposition of the two component parts. This feature allows one, in principle, to decode the two components. The relevance of these results for Giddings sample dimensionality and separation dimensionality and their effective experimental evaluation is discussed.     

Comparison of the group V and VI transition metal carbides for methane dry reforming and thermodynamic prediction of their relative stabilities

The DME‐SCR activity was suppressed upon exposure of a γ-alumina catalyst to SO₂, in contrast to methanol‐SCR, which remains active at the same surface sulphate coverage. This difference in behaviour is attributed to the limited availability of surface methoxy, which may be regarded as a prerequisite for NOx- reduction over γ-alumina under lean conditions, in the case of dimethyl ether in the presence of SO₂. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synergistic reinforcement of surface modification on improving the bonding of veneering ceramics to zirconia

Veneering ceramics should be strongly bonded to zirconia core in order to achieve successfully long-term clinical practice. Indeed, to pursue the high zirconia core–veneering ceramic bonding is still a concerned issue. In this regard, this study was to treat zirconia surface using a 3?wt% Si₃N₄ solution in 4?M NaOH and to investigate the effect of soaking time (5, 10, and 20 days) on the surface properties of zirconia and shear bond strength between zirconia and veneering ceramics. The residual veneering ceramics on zirconia surfaces and failure modes were also examined after fracture. The results showed that the phase composition of zirconia before and after surface modification was not changed. The elemental mapping and depth profiling consistently revealed the soaking-time-dependent Si content on the zirconia surface. The surface roughness of zirconia was significantly (P?<?0.05) increased with the increasing soaking time. When zirconia was treated for 10 days, the shear bond strength value of 27.4?MPa was significantly (P?<?0.05) higher than the control (18.6?MPa), associated with greater remaining amounts of veneering ceramics on the zirconia surface. The failure mode of the treated zirconia was almost the mixed failure. On the basis of the data, surface modification using Si₃N₄ in NaOH solution for zirconia core could be a simple and effective method for enhancing the veneering ceramic–zirconia bonding.     

Effects of SGLT2 Inhibitors beyond Glycemic Control—Focus on Myocardial SGLT1

Selective sodium–glucose cotransporter 2 (SGLT2) inhibitors reduced the risk of hospitalization for heart failure in patients with or without type 2 diabetes (T2DM) in large-scale clinical trials. The exact mechanism of action is currently unclear. The dual SGLT1/2 inhibitor sotagliflozin not only reduced hospitalization for HF in patients with T2DM, but also lowered the risk of myocardial infarction and stroke, suggesting a possible additional benefit related to SGLT1 inhibition. In fact, several preclinical studies suggest that SGLT1 plays an important role in cardiac pathophysiological processes. In this review, our aim is to establish the clinical significance of myocardial SGLT1 inhibition through reviewing basic research studies in the context of SGLT2 inhibitor trials.     

Adhesion of a rigid punch to a confined elastic layer revisited

The adhesion of a punch to a linear elastic, confined layer is investigated. Numerical analysis is performed to determine the equivalent elastic modulus in terms of layer confinement. The size of the layer relative to the punch radius and its Poisson’s ratio are found to affect the layer stiffness. The results reveal that the equivalent modulus of a highly confined layer depends on its Poisson’s ratio, whereas, in contrast, an unconfined layer is only sensitive to the extent of the elastic film. The solutions of the equivalent modulus obtained from the simulations are fitted by an analytical function that, subsequently, is utilized to deduce the energy release rate for detachment of the punch via linear elastic fracture mechanics. The energy release rate strongly varies with layer confinement. Regimes for stable and unstable crack growth can be identified that, in turn, are correlated to interfacial stress distributions to distinguish between different detachment mechanisms.