Hybrid FeNiOOH/α‐Fe2O3/Graphene Photoelectrodes with Advanced Water Oxidation Performance

In this study, the photoelectrochemical behavior of electrodeposited FeNiOOH/Fe₂O₃/graphene nanohybrid electrodes is investigated, which has precisely controlled structure and composition. The photoelectrode assembly is designed in a bioinspired manner where each component has its own function: Fe₂O₃ is responsible for the absorption of light, the graphene framework for proper charge carrier transport, while the FeNiOOH overlayer for facile water oxidation. The effect of each component on the photoelectrochemical behavior is studied by linear sweep photovoltammetry, incident photon‐to‐charge carrier conversion efficiency measurements, and long‐term photoelectrolysis. 2.6 times higher photocurrents are obtained for the best‐performing FeNiOOH/Fe₂O₃/graphene system compared to its pristine Fe₂O₃ counterpart. Transient absorption spectroscopy measurements reveal an increased hole‐lifetime in the case of the Fe₂O₃/graphene samples. Long‐term photoelectrolysis measurements in combination with Raman spectroscopy, however, prove that the underlying nanocarbon framework is corroded by the photogenerated holes. This issue is tackled by the electrodeposition of a thin FeNiOOH overlayer, which rapidly accepts the photogenerated holes from Fe₂O₃, thus eliminating the pathway leading to the corrosion of graphene.     

Grain velocity distribution in a mixed flow dryer

For corn drying one of the most popular possibilities in Europe is to use a mixed flow dryer. Large differences in the vertical grain particle velocity in this type of dryers are causing differences in the residence time. Hence, uneven drying occurs causing under-drying or over-drying of grain portions. To investigate the influences of the dryer walls and the air ducts on the particle velocity distribution experiments have been carried out in industrial and laboratory sized dryers and the measurements were compared with discrete element models. The particle flow velocity distribution between the air ducts is modelled analytically based on arching hypothesis. Using discrete element models the effects of different possible constructional modifications causing more even vertical grain particle velocity distribution were analyzed.     

Active and passive stabilization of body pitch in insect flight

Flying insects have evolved sophisticated sensory–motor systems, and here we argue that such systems are used to keep upright against intrinsic flight instabilities. We describe a theory that predicts the instability growth rate in body pitch from flapping-wing aerodynamics and reveals two ways of achieving balanced flight: active control with sufficiently rapid reactions and passive stabilization with high body drag. By glueing magnets to fruit flies and perturbing their flight using magnetic impulses, we show that these insects employ active control that is indeed fast relative to the instability. Moreover, we find that fruit flies with their control sensors disabled can keep upright if high-drag fibres are also attached to their bodies, an observation consistent with our prediction for the passive stability condition. Finally, we extend this framework to unify the control strategies used by hovering animals and also furnish criteria for achieving pitch stability in flapping-wing robots.     

英飞凌的低成本电容式触控解决方案

XC800单片机家族的最新成员XC82x和XC83x,为控制多个触摸按键、触摸滑条或触摸滚轮提供了高性能电容式触摸传感解决方案。借助专用模块和存放于ROM的软件库,这些器件可支持三种利用超小型用户软件测量触摸板容量和驱动LED点阵的方法。     

From stochastic single atomic switch to nanoscale resistive memory device

We study the switching characteristics of nanoscale junctions created between a tungsten tip and a silver film covered by a thin ionic conductor layer. Atomic-sized junctions show spectacular current induced switching characteristics, but both the magnitude of the switching voltage and the direction of the switching vary randomly for different junctions. In contrast, somewhat larger junctions with diameters of a few nanometres display a well defined, reproducible switching behavior attributed to the formation and destruction of nanoscale channels in the ionic conductor surface layer. Our results define a lower size limit of 3 nm for reliable ionic nano-switches, which is well below the resolution of recent lithographic techniques.     

Transient protein-protein interactions

Transient complexes are crucial for diverse biological processes such as biochemical pathways and signaling cascades in the cell. Here, we give an overview of the transient interactions; the importance of transient interactions as drug targets; and the structural characterization of transient protein-protein complexes based on the geometrical and physicochemical features of the transient complexes' interfaces. To better understand and eventually design transient protein-protein interactions (TPPIs), a molecular perspective of the protein-protein interfaces is necessary. Obtaining high-quality structures of protein-protein interactions could be one way of achieving this goal. After introducing the association kinetics of TPPIs, we elaborate on the experimental techniques detecting TPPIs in combination with the computational methods which classify transient and/or non-obligate complexes. In this review, currently available databases and servers that can be used to identify and predict TPPIs are also compiled.     

Asymmetric synthesis and conformational analysis by NMR spectroscopy and MD of Aba- and α-MeAba-containing dermorphin analogues

Dermorphin analogues, containing a (S)‐ and (R)‐4‐amino‐1,2,4,5‐tetrahydro‐2‐benzazepin‐3‐one scaffold (Aba) and the α‐methylated analogues as conformationally constrained phenylalanines, were prepared. Asymmetric phase‐transfer catalysis was unable to provide the (S)‐α‐Me‐o‐cyanophenylalanine precursor for (S)‐α‐MeAba in acceptable enantiomeric purity. However, by using a Schöllkopf chiral auxiliary, this intermediate was obtained in 88 % ee. [(S)‐Aba 3‐Gly 4]dermorphin retained μ‐opioid affinity but displayed an increased δ‐affinity. The corresponding R epimer was considerably less potent. In contrast, the [(R)‐α‐MeAba 3‐Gly 4]dermorphin isomer was more potent than its S epimer. Tar‐MD simulations of both non‐methylated [Aba 3‐Gly 4]dermorphin analogues showed a degree of folding at the C‐terminal residues toward the N terminus of the peptide, without however, adopting a stabilized β‐turn conformation. The α‐methylated analogues, on the other hand, exhibited a type I/I′ β‐turn conformation over the α‐MeAba 3 and Gly 4 residues, which was stabilized by a hydrogen bond involving Tyr 5‐H_N and D ‐Ala 2‐CO.     

Effects of SGLT2 Inhibitors beyond Glycemic Control—Focus on Myocardial SGLT1

Selective sodium–glucose cotransporter 2 (SGLT2) inhibitors reduced the risk of hospitalization for heart failure in patients with or without type 2 diabetes (T2DM) in large-scale clinical trials. The exact mechanism of action is currently unclear. The dual SGLT1/2 inhibitor sotagliflozin not only reduced hospitalization for HF in patients with T2DM, but also lowered the risk of myocardial infarction and stroke, suggesting a possible additional benefit related to SGLT1 inhibition. In fact, several preclinical studies suggest that SGLT1 plays an important role in cardiac pathophysiological processes. In this review, our aim is to establish the clinical significance of myocardial SGLT1 inhibition through reviewing basic research studies in the context of SGLT2 inhibitor trials.     

Incident Light Metering in Computer Graphics

Every rendering process consists of two steps. The first is the computing of luminance values by methods like ray tracing or radiosity, and the second step is the mapping of the computed values to values appropriate for displaying. In the last years, as alternative to simple linear scaling which maps the average value to the medium luminance, some new ways of mapping were introduced. These new methods are based on photography analogies and on human vision models. All existing methods follow, implicitly or explicitly, the reflected light metering principle. The method introduced in this paper is the first that follows the incident light metering used in professional photography and in the movie industry. Actually the irradiances are measured using a set of diffusors, which are placed automatically in the scene, and a linear scale factor based on these measurements is used to map the computed radiances to the display device. The diffusors act as half space integrators, they collect the light energy from all half space directions. The light comes from the primary light sources, or it is the result of various interreflections. The newly introduced method reproduces original colors faithfully even for scenes with very low or very high average reflectivity.     

Dopamine Photochemical Behaviour under UV Irradiation

To understand the photochemical behaviour of the polydopamine polymer in detail, one would also need to know the behaviour of its building blocks. The electronic absorption, as well as the fluorescence emission and excitation spectra of the dopamine were experimentally and theoretically investigated considering time-resolved fluorescence spectroscopy and first-principles quantum theory methods. The shape of the experimental absorption spectra obtained for different dopamine species with standard, zwitterionic, protonated, and deprotonated geometries was interpreted by considering the advanced equation-of-motion coupled-cluster theory of DLPNO-STEOM. Dynamical properties such as fluorescence lifetimes or quantum yield were also experimentally investigated and compared with theoretically predicted transition rates based on Fermi’s Golden Rule-like equation. The results show that the photochemical behaviour of dopamine is strongly dependent on the concentration of dopamine, whereas in the case of a high concentration, the zwitterionic form significantly affects the shape of the spectrum. On the other hand, the solvent pH is also a determining factor for the absorption, but especially for the fluorescence spectrum, where at lower pH (5.5), the protonated and, at higher pH (8.0), the deprotonated forms influence the shape of the spectra. Quantum yield measurements showed that, besides the radiative deactivation mechanism characterized by a relatively small QY value, non-radiative deactivation channels are very important in the relaxation process of the electronic excited states of different dopamine species.