Effects of Doping Trivalent Ions in Bismuth Borate Glasses

Bismuth borate glasses from the system: 40Bi₂O₃–59B₂O₃–1Tv₂O₃ (where Tv=Al, Y, Nd, Sm, and Eu) and three glasses of composition: 40Bi₂O₃–60B₂O₃, 37.5Bi₂O₃–62.5B₂O₃ and 38Bi₂O₃–60B₂O₃–2Al₂O₃ were prepared by melt quenching and characterized by density, UV-visible absorption spectroscopy and differential thermal analysis (DTA) studies. Bismuth borate glasses exhibit a very strong optical absorption band just below their absorption edge. Glasses were devitrified by heat treatment at temperatures above their glass transition temperatures and the crystalline phases produced in them were characterized by Fourier transform infrared (FTIR) absorption spectroscopy and X-ray diffraction (XRD). Bi₃B₅O₁₂ was found to be the most abundant phase in all devitrified samples. DTA studies on glasses and FTIR and XRD analysis on crystallized samples revealed that very small amounts of trivalent ion doping causes significant changes in the devitrification properties of bismuth borate glasses; rare-earth ions promote the formation of metastable BiBO₃–I and BiBO₃–II phases during glass crystallization.     

Generalized form of optimal teleportation witnesses

We propose a generalized form of optimal teleportation witness to demonstrate their importance in experimental detection of the larger set of entangled states useful for teleportation in higher dimensional systems. The interesting properties of our witness reveal that teleportation witness can be used to characterize mixed state entanglement using Schmidt numbers. Our results show that while every teleportation witness is also a entanglement witness, the converse is not true. Also, we show that a hermitian operator is a teleportation witness iff it is a decomposable entanglement witness. In addition, we analyze the practical significance of our study by decomposing our teleportation witness in terms of Pauli and Gell-Mann matrices, which are experimentally measurable quantities.     

Effect of thermo physical properties of heat exchanger material on the performance of latent heat storage system using an enthalpy method

In this paper, a simple two‐dimensional theoretical model based on enthalpy formulation of a latent heat storage system has been developed to study the effects of thermo physical properties of heat exchanger container materials on the thermal performance of the storage system. Numerical results show that thermal conductivity, specific heat and density of the heat exchanger container materials increases, the melting time of the PCM decreases. Numerical results also show that high value of thermal conductivity of the heat exchanger container materials did not make significant contribution on the melt fraction. It is also found that initial temperature of the PCM does not have very important effects on the melting time, while the boundary wall temperature play an important role during melting. Copyright © 2005 John Wiley & Sons, Ltd.     

The development of cavity growth maps for superplastic materials

Superplastic alloys usually deform to very large extents but excessive cavitation can lead to premature cavitation failure in these materials. Several mechanisms can contribute to the growth of cavities during superplastic deformation although, generally, there is only one mechanism that controls cavity growth. Cavity growth mechanisms of relevance to superplastic materials are analysed in detail and the possible transitions in rate-controlling cavity growth mechanisms are considered. The contribution of lattice diffusion to the diffusional growth of cavities is included in the overall analysis of cavity growth. Cavity growth maps are constructed to show the dominant cavity growth mechanisms under different experimental conditions. Equations are developed to predict the appropriate transitions in cavity growth mechanisms with increasing cavity radii. Finally, it is demonstrated that the predictions of the cavity growth maps are consistent with the experimental results in several superplastic materials.     

A novel design approach of charge plasma tunnel FET for radio frequency applications

In this paper, the impact of extra electron source (EES) and dual metal gate engineering on conventional charge plasma TFET (CP-TFET) have been done for improving DC and analog/RF parameters. CP-TFET structure is upgraded to double source CP-TFET (DS-CP-TFET) by placing an EES below the source/channel junction for enhancing the device performance in terms of driving current and RF figures of merit (FOMs). But, in spite of these pros, the approach is having cons of higher leakage current similar to MOSFET and negative conductance (inherent nature of TFET). Both the issues have been resolved in the double source dual gate CP-TFET (DS-DG-CP-TFET) by gate workfunction engineering and drain underlapping respectively. Additionally, for getting the optimum performance of DS-DG-CP-TFET, the device sensitivity has been investigated in terms of position of EES, length of drain electrode and workfunction of gate electrode 1 (GE1).     

Magnetic field-assisted photochemical machining (MFAPCM) of SS316L

In this paper, a new technique of photochemical machining (PCM) process has been described. The objective of this study is to investigate the effect of applying a magnetic field on the PCM of AISI 316?L stainless steel. The experiments were planned and conducted using a Full Factorial Design (FFD) approach. The control parameters selected were magnetic field, temperature, concentration and time. The analysis of the results shows significant improvement in the etch rate due to the application of a magnetic field. The highest etch rate was achieved at a concentration of 700?g/l, at the temperature of 60°C in a static magnetic field. The improvement of the etch rate is 2.5 times with the application of magnetic field as compared to the conventional PCM process.     

Oxidation Behavior of a Si-C-O-Fiber-Reinforced Magnesium Aluminosilicate

The oxidation behavior of a Si-C-O-fiber-reinforced magnesium aluminosilicate has been investigated in the temperature range 1000°-1200°C. Parabolic weight gain, together with other experimental observations, has suggested that the oxidation process was controlled by the outward diffusion of carbon monoxide gas. The matrix and fibers reacted to form enstatite and forsterite. During the initial stages of oxidation, an interlayer containing a mixture of silica and turbostratic carbon was formed. This interlayer was modified progressively over time to create interface morphologies near the surface and near the center of the oxidized samples that were different from one another. A mechanism explaining the morphological evolution of the fiber-matrix interfaces has been proposed.     

Are financial incentives related to performance? A meta-analytic review of empirical research.

The relationship of financial incentives to performance quality and quantity is cumulated over 39 studies containing 47 relationships. Financial incentives were not related to performance quality but had a corrected correlation of .34 with performance quantity. Setting (laboratory, field, experimental simulation) and theoretical framework moderated the relationship, but task type did not. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Collapse load analysis of square and rectangular tubes subjected to transverse in-plane loading

Experiments to determine the collapse load of aluminum and mild steel tubes, of square and rectangular cross-sections, between parallel rigid platens were carried out in an Instron machine. A two stage analysis for the collapse of these tubes was carried out by considering the out-of-straightness of arms, corner radius, friction between the platens and the specimen and stability of the vertical arms. Results thus obtained compare well with experiments.