Sedimentation of Permeable Floc

Sedimentation is an essential step to dewatering of wet materials. The present work utilized the computerized axial tomography scanner (CAT scan) to probe the sedimentation behavior of suspension with different initial solid concentrations. Not as assumed by traditional Kynch theory, the solid flux was not only a function of local solid fraction, but also of the settling time and the initial concentrations. Hence, the interior structure of floc was explored by the fluorescence in situ hybridization (FISH) and confocal laser scanning microscope (CLSM). Subsequently, the three-dimensional floc model was built up and intrafloc flow fields numerically solved. The area-weighted average pressure drop in the floc and mean flow rates estimated the floc permeability, based on Darcy's law, which were noted to vary along different principal axes and for different flocs. Local structure determines local flow field, hence determining the settling behavior of floc. Floc of large pores with low tortuosity produced easy flow-through paths, giving fast settling. Use of the average properties, such as porosity, cannot describe the sedimentation behavior of permeable flocs.     

Exergetic performance analysis of a PEM fuel cell

In this paper we investigate the effects of thermodynamic irreversibilities on the exergetic performance of proton exchange membrane (PEM) fuel cells as a function of cell operating temperature, pressures of anode and cathode, current density, and membrane thickness. The practical operating conditions are selected to be 3–5 atm for anode and cathode pressures, and 323–353 K for the cell temperatures, respectively. In addition, the membrane thicknesses are chosen as 0.016, 0.018 and 0.02 cm, respectively. Moreover, the current density range of the PEM fuel cell is selected to be 0.01–2.0 A cm^?2. It is concluded that exergy efficiency of PEM fuel cell decreases with a rise in membrane thickness and current density, and increases with a rise of cell operating pressure and with a decrease of current density for the same membrane thickness. Thus, it can be said that, in order to increase the exergetic performance of PEM fuel cell, the lower membrane thickness, the lower current density and the higher cell operating pressure should be selected in case PEM fuel cell is operated at constant cell temperature. Copyright © 2005 John Wiley & Sons, Ltd.     

Experimentally and numerically investigating cell performance and localized characteristics for a high-temperature proton exchange membrane fuel cell

This paper is to experimentally and numerically investigate the cell performance and the localized characteristics associated with a high-temperature proton exchange membrane fuel cell (PEMFC). Three experiments are carried out in order to study the performance of the PEMFC with different operating conditions and to validate the numerical simulation model. The model proposed herein is a three-dimensional (3-D) computational fluid dynamics (CFD) non-isothermal model that essentially consists of thermal–hydraulic equations and electrochemical model. The performance curves of the PEMFC predicted by the present model agree with the experimental measured data. In addition, both the experiments and the predictions precisely demonstrate the enhanced effects of inlet gas temperature and system pressure on the PEMFC performance. Based on the simulation results, the localized characteristics within a PEMFC can be reasonably captured. These parameters include the fuel gas distribution, liquid water saturation distribution, membrane conductivity distribution, temperature variation, and current density distribution etc. As the PEMFC is operated at the higher current density, the fuel gas would be insufficiently supplied to the catalyst layer, consequently causing the decline in the generation of power density. This phenomenon is so called mass transfer limitation, which can be precisely simulated by the present CFD model.     

Effect of packaging materials and storage temperature on the quality of sour cherry nectar

The purpose of this research was to determine the effects of the packaging materials and size on the stability of monomeric anthocyanins, polyphenols, antioxidant activity, ascorbic acid, colour index and hydroxyl methyl furfural (HMF) during the 12‐month shelf life of sour cherry nectars at 4 °C and 20 °C. Sour cherry nectars were aseptically filled out into packaging of different sizes and materials. The packaging included cartons of two different sizes (200 and 1000 mL) and aluminium cans (330 mL). Results showed that the nectars were of better quality when stored at lower temperatures. HMF generally increased significantly for all nectars during storage. Conversely, the total polyphenol content and the antioxidant activity of the nectars stored in aluminium cans and the larger‐sized carton packaging decreased during storage. Lower anthocyanin loss and colour change were found in the nectars stored in aluminium cans. However, the better packaging material was found to be the large‐sized carton package when HMF was analysed.     

Ion Chromatographic Determination of Free Cyanide in Different Classes of Bottled Natural Mineral Water Consumed in Turkey

An ion chromatographic method for the quantitative determination of free cyanide in bottled natural mineral waters were measured in terms of selectivity, linearity, the limit of detection, limit of quantification, repeatability, precision, and accuracy. Chromatographic separation of free cyanide ions was accomplished with an anion-exchange column and detected by pulsed amperometric detection with a silver working electrode. The method was found to be selective, linear (r² = 0.999) at a concentration range of 0.5 to 134 μg L^?1, precise, and accurate. Recovery values of free cyanide in all classes of natural mineral water varied from 65.9 ± 1.6 to 95.2 ± 0.7 at different spiking levels (5–70 μg L^?1). Parameters (total dissolved solids, mineral interferences, and added sodium hydroxide) affecting the recovery values were studied in this project. The limit of detection and limit of quantification were found to be 0.295 and 0.983 μg L^?1, respectively. The proposed method was applied to 27 different brands of commercially available bottled natural mineral water products sold in Turkish markets. These natural mineral waters were classified as: (i) very low mineral concentration, (ii) low mineral concentration, (iii) intermediate mineral concentration, and (iv) high mineral concentration based on their total dissolved solids contents according to European Union Directive (Directive 80/777/EEC). Levels of free cyanide residues in the samples ranged from > limit of detection to 6.12 μg L^?1. The highest average concentration of free cyanide residues was found in the class of “high mineral concentration waters.” However, the determined free cyanide values in all of the tested natural mineral water samples were found to be within the limits of European Union legislation.     

Use of oligonucleotide array for identification of six foodborne pathogens and Pseudomonas aeruginosa grown on selective media

Identification of presumptive foodborne pathogens grown on selective media may take one to several days and requires a different battery of biochemical tests for each microorganism. A molecular identification method was developed in which universal primers were used to amplify the 16S to 23S rDNA intergenic spacer of target microorganisms, and PCR products were hybridized to a panel of species-specific oligonucleotides that were immobilized on a nylon membrane. The seven target microorganisms were Bacillus cereus, Escherichia coli, Listeria monocytogenes, Pseudomonas aeruginosa, Salmonella, Staphylococcus aureus, and Vibrio parahaemolyticus. After testing a large collection of target bacteria (29 to 51 strains) and nontarget bacteria (> 500 strains), the performances (sensitivity and specificity) of the oligonucleotide array were as follows: B. cereus (100 and 77%), E. coli (100 and 100%), L. monocytogenes (100 and 90%), P. aeruginosa (100 and 100%), Salmonella (100 and 100%), S. aureus (100 and 100%), and V. parahaemolyticus (100 and 94.2%). Other species in the B. cereus group cross-hybridized to the probes used for identification of B. cereus, and positive results should be confirmed by additional morphological observation of colonies. Listeria innocua cross-reacted with probes used to identify L. monocytogenes, but a simple hemolysis test was used to differentiate the two species. Some strains of Vibrio harveyi and Vibrio mimicus cross-hybridized with probes used for identification of V. parahaemolyticus and caused false-positive reactions. The advantage of the array is that a common protocol was used to identify the seven target microorganisms and multiple different microorganisms could be simultaneously identified on a single array.