Occurrence and sources of perfluorinated surfactants in rivers in Japan

We analyzed perfluorinated surfactants (PFSs) in 20 river samples and 5 wastewater secondary effluent samples in Japan to reveal their occurrence and sources. Nine PFS species were determined: perfluorooctanesulfonate (PFOS), perfluorooctane sulfonamide (FOSA), perfluoroheptanoate (PFHpA), perfluorooctanoate (PFOA), perfluorononanoate (PFNA), perfluorodecanoate (PFDA), perfluoroundecanoate (PFUA), perfluorododecanoate (PFDDA), and perfluorotridecanoate (PFTDA). PFSs were detected in all rivers, revealing nationwide contamination of rivers. In particular, 11 out of 20 river samples exceeded New Jersey guidance for PFOA in drinking water (40 ng/L). PFOS, PFHpA, PFOA, and PFNA were major species in Japan. Concentrations of PFOS, PFHpA, and PFNA in rivers were strongly correlated with population density, suggesting that the chemicals were derived from urban activities. PFOA showed a significant but weak correlation. We used crotamiton, a marker of sewage effluent, for further source analysis. Concentrations of PFOS, PFHpA, and PFNAwere strongly correlated with those of crotamiton, and plots of secondary effluents fell near the regression lines of rivers, indicating that the PFOS, PFHpA, and PFNA in rivers were derived from sewage effluent. On the other hand, PFOA was found at remarkably high levels (54-192 ng/L) in seven river samples containing low levels of crotamiton, suggesting that it was derived from nonsewage point sources, as well as sewage effluent. The total fluxes of sewage-derived PFOS, PFHpA, PFOA, and PFNA from Japan were estimated to be 3.6, 2.6, 5.6, and 2.6 t/year, respectively. This is the first report to identify PFOA in several rivers, derived from nonsewage point sources, by using a marker of sewage effluent.     

Sorptive behavior of nitro-PAHs in street runoff and their potential as indicators of diesel vehicle exhaust particles

This is the first report to reveal the particle-water distribution of nitropolycyclic aromatic hydrocarbons (NPAHs) and to discuss their potential risks and utility as indicators of diesel vehicle exhaust particles (DEP). Time-series samples of runoff were collected from a highway, and NPAHs and polycyclic aromatic hydrocarbons (PAHs) were determined by gas chromatography-mass spectrometry (GC-MS) to study their dynamic behavior. The concentrations of total NPAHs ranged from 11 to 73 ng/L in particulate phase (>0.7 mcirom) and from 2.3 to 4.9 ng/L in dissolved phase (<0.7 microm). Like their PAH analogs, most (81-97%) NPAHs were associated with particulate matter. The organic carbon-normalized in situ partition coefficients (Koc') of NPAHs observed in runoff events (10(5.8-6.3) for 2-nitrofluoranthene and 10(5.8-6.2) for 1-nitropyrene [1-NP]) were more than 1 order of magnitude higher than those expected from their Kow, indicating great affinity for particulate matter such as soot. Concentrations of PAHs and NPAHs adjusted by potency equivalency factors and induction equivalency factors showed that the potential risks of NPAHs were smaller than those of PAHs by a factor of more than a hundred for the particulate phase and morethan fourforthe dissolved phase. Comparison of concentrations and compositions of NPAHs and PAHs among runoff, DEP, gasoline vehicle exhaust particles, boiler exhaust particles, and aerosols suggested that the ratio of 1-NP to total PAHs (1-NP/PAH) is a useful indicator of DEP for source apportionment of PAHs among traffic-related sources. Source-apportionment of PAHs in the runoff by 1-NP/PAH and methylphenanthrene/phenanthrene ratios suggested that most PAHs in the runoff except the second flush peak were derived from DEP but that other pyrogenic sources contributed to the particles at the second flush and thus to the overall runoff particles.     

Performance of nitrogen- and sulfur-containing carbon material derived from thiourea and formaldehyde as electrochemical capacitor

In order to investigate the performance of an electrochemical capacitor consisting of a nitrogen- and sulfur-containing carbon material, the carbon material derived from thiourea and urea was synthesized by a polymerization process of the urea resin. No solid appeared after the polymerization process. When the dried sample after the polymerization process was heated in flowing N2 gas, we obtained carbon material. However, there was no product when only thiourea was heated under the same conditions. The percentages of nitrogen and sulfur in all the samples synthesized from thiourea were roughly 5-20 wt.% and 3-8 wt.% even after washing with hot water, respectively. No specific peak derived from the redox reaction appeared in the CV graphs for the samples. The capacitance value of T-urea800W, which was synthesized by the heat treatment at 800 °C and then wash with hot water, was 138.8 F g⁻¹ at the current density of 50 mA g⁻¹ in a 1 M H₂SO₄ water solution whereas that value of a commercial activated carbon was 107.1 F g⁻¹ under the same conditions. It was presumed from the XPS measurements that the status of the nitrogen and sulfur in the materials are a pyridine-like nitrogen at the edge part of the graphitic structure, a quaternary nitrogen in the graphitic-layered structure, and S⁰, S⁴⁺, and S²⁻, respectively.     

Numerical Flow Simulation in Turbine Mode of Counter-Rotating Type Pumping Unit to Cooperate with Wind Turbine

This serial research has proposed the hybrid power system combined the wind power unit with the counter-rotating type pump-turbine unit, to provide the constant output for the grid system, even at the suddenly fluctuating/turbulent wind circumstance. In this paper, the tandem impellers prepared for the counter-rotating type pumping unit were operated at the turbine mode, and the performances and the flow conditions were investigated numerically with accompanying the experimental results. Even though providing the pumping unit for the turbine mode, the maximum hydraulic efficiency is close to one of the counter-rotating type hydroelectric unit designed exclusively for the turbine mode. Besides, the runners/impellers of the unit work evidently so as to coincide the angular momentum change through the front runners/impellers with that through the rear runners/impellers, namely to take the axial flow at not only the inlet but also the outlet, without the guide vanes. From these results, it can be concluded that this type unit is effective to work at not only the pumping but also the turbine modes.     

Parametric Investigation of Viscous Dissipation Effects on Optimized Air Cooling Microchanneled Heat Sinks

The effects of viscous dissipation of working fluid on the optimum heat sink parameters are investigated for the case of air cooling with a micro-/narrow-channeled compact heat sink. For this purpose, an optimization method is introduced first on the basis of dimensionless groups while employing several assumptions. This method yields minimum pumping work or pressure drop with a set of optimized geometric/hydrodynamic parameters when outer dimension of a heat sink and imposed thermal load are specified. Especially for the case of laminar flow, the procedure presents an explicit existence of cooling limit by the viscous heat generation, giving an analytical expression of the maximum removable heat Q max . The relationships between thermal load and each parameter are calculated for both laminar and turbulent regimes under the conditions of compact heat sink dimension (20 mm 2 20 mm 2 2 mm) and circular cross-sectional shape of channels. The results show that the cooling capability under such conditions is largely limited by the salient manifestation of viscous dissipation, when compared with our previous investigation on water cooling presented in [1]. From the discussion, it was concluded that when a micro-/narrow-channeled heat sink is to be designed with air, the effect of viscous dissipation should be taken into account in order to avoid falling on wrong optimum solutions.     

Hop Variety Classification Using the Genetic Distance Based on RAPD*

Fifty‐one hop varieties from around the world were subjected to random amplified polymorphic DNA (RAPD) analysis with 10‐mer arbitrary primers. Polymorphism was scored and the genetic distance was calculated as the proportion of shared DNA bands in a pair of varieties for the construction of a dendogram by an unweighted pair‐group method was arithmetical averages. The varieties were roughly classified into 6 clusters, and the similarity between varieties correlated with their breeding history. The result also suggests that at least two populations existed in ancient times and the hops cultivated in England originated from or are related to both populations. Many high alpha varieties have a genetic composition unlike old European hops. This difference is thought to result from the integration of wild American hops.     

FIR system identification based on a nonparametric Bayesian model using the Indian buffet process

In this paper, we propose a nonparametric Bayesian model combined with the Indian buffet process (IBP) for a finite impulse response (FIR) system. We develop an FIR system identification method that can simultaneously estimate the number of FIR taps and coefficients. In the proposed model, each FIR tap consists of a coefficient and a gain, and the gain is a binary value. An infinite-dimensional binary vector is composed of binary values, and we assume that this binary vector is generated by the IBP. To identify the FIR system, we specify the likelihood function and prior distributions of the parameters and derive their posterior distributions. We can simultaneously estimate the number of FIR taps and coefficients by sampling from posterior distributions using the Gibbs sampler. Our simulations demonstrate that although the number of FIR taps is unknown, the identification performance of the proposed method in a high signal-to-noise ratio environment is similar to or better than that of the conventional least square solution.     

Quail egg yolk (Coturnix coturnix japonica) enriched with omega-3 fatty acids

This experiment was carried out with 58-week old laying quails (Coturnix coturnix japonica) assigned to four treatment groups with eight quails per replication in six repetitions in a completely randomized design. The treatments consisted of diets with different levels of flaxseed (0, 1.5, 3.0, and 5.0%). The amounts of cholesterol and total lipids and the fatty acid composition of quail egg yolk were determined in four 21-day cycles. No difference was found in cholesterol levels between the four treatments and the four cycles. The increased ingestion of linolenic acid (LNA) in diet reduced the formation of arachidonic acid (AA) significantly. The 3.0 and 5.0% treatment groups presented a reduction in total saturated fatty acids (TSFA) with the increase in percent flaxseed in feed comparatively to the control value. The n-3 fatty acid level was high in all treatments when compared to that of the control group. The n-6/n-3 ratio decreased from 21.30 (control) to 4.52 (5.0%), which is a better value from the nutritional viewpoint.     

Evaluation of highly damaged renal function following extracorporeal circulation--usefulness of alpha 1-microglobulin index

The patients with highly damaged renal functions following extracorporeal circulation (ECC) were reviewed. Markers such as serum and urine creatinine (SCr, UCr), blood urea nitrogen (BUN), alpha 1-microglobulin in urine (as a marker of renal tubular function, abbreviated as U alpha 1-m), microalbumin in urine (as a marker of renal glomerular function, abbreviated as UA1b) were measured in each cases. Twenty patients were selected with the maximum value of U alpha 1-mover 60 micrograms/dl during or after ECC. The patients were classified into three groups according to preoperative value of alpha 1-m index (alpha 1-m index (I) = U alpha 1-m/UCr x 100 mg/g Cr), and Albumin index (Albumin index (I) = UA1b/UCr x 100 mg/g Cr). Group I (n = 13); alpha 1-m I > 10 and, Alb I > or = 50 (abnormal value of tubular and glomerular function), Group II (n = 3); alpha 1-m I < or = 10, Alb I > or = 50 (abnormal value of glomerular function), Group III (n = 4); alpha 1-m I < or = 10, Alb I < 50 (normal value of tubular and glomerular function). Six patients in Group I required postoperative hemodialysis (HD) and one patient in Group II. No one required HD in Group III. These facts suggest that preoperative damage of tubular and glomerular functions may become prolonged or irreversible damages may occur after operation. HD is required frequently in patients with alpha 1-m I level over 500 mg/g Cr, especially continuous HD may be needed in patient with alpha 1-m I level over 1000 mg/g Cr.