Metal-electroceramic bonding in PZT through the selective application of laser energy

Ferrite powder has been directly bonded to the surface of poled lead zirconate titanate (PZT-4) using direct laser sintering. The resultant cohesion between the metal and ceramic is extremely good although care must be taken with the processing in order to limit the damage inflicted upon the PZT. Four point bending suggests that the strength of the processed samples has reduced to 60 MPa as compared to 76 MPa for the unprocessed ceramic. Electrical and piezoelectric measurements shows that the laser sintering had caused mechanical damage to a depth of 550 μm and thermal damage (depoling) to a depth of 800 μm.     

Recent developments in catalyst synthesis using DBD plasma for reforming applications

The catalyst has a significant role in gas processing applications such as reforming technologies for H₂ and syngas production. The stable catalyst is requisite for any industrial catalysis application to make it commercially viable. Several methods are employed to synthesize the catalysts. However, there is still a challenge to achieve a controlled morphology and pure catalyst which majorly influences the catalytic activity in reforming applications. The conventional methods are expansive, and the removal of the impurities are major challenges. Nevertheless, it is not straightforward to achieve the desired structure and stability. Therefore, significant interest has been developed on the advanced techniques to take control of the physicochemical properties of the catalyst through non-thermal plasma (NTP) techniques. In this review, the systematic evolution of the catalyst synthesis using NTP technique is elucidated. The emerging DBD plasma to synthesized and effective surface treatment is reviewed. DBD plasma synthesized catalyst performance in reforming application for H₂ and syngas production is summarised. Furthermore, the status of DBD plasma for catalyst synthesis and proposed future avenues to design environmentally suitable and cost-effective synthesis techniques are discussed.     

A non-contact method for part-based process performance monitoring in end milling operations

Surface response to excitation (SuRE) method was originally developed for structural health monitoring (SHM) applications. SuRE was used to evaluate the performance of completed milling operations. The method generates surface waves on the plate and studies the spectrum changes at selected points to detect defects and change of compressive forces. In this study, the length, depth, and width of a slot were changed step by step. The surface of the aluminum plate was excited in the 20–400 kHz range with a piezoelectric element. A laser scanning vibrometer was used to monitor the vibrations at the predetermined grid points after the dimensions of the slot were changed methodically. The frequency spectrums of measured vibrations were calculated by using the Fast Fourier Transformation (FFT). The sums of the squares of the differences (SSD) of the spectrums were calculated to evaluate the change of the spectrums. The SuRE method was able to determine if the dimensions were changed in each case at all the selected points. The scanning laser vibrometer is not feasible to be used at the shop floor. However, the study demonstrated that a piezoelectric element attached to any of the grid points would be able to evaluate the completed machining process.     

Recent advances in the production of γ‐valerolactone from biomass‐derived feedstocks via heterogeneous catalytic transfer hydrogenation

γ‐valerolactone (GVL) is an important intermediate chemical with a wide range of applications as fuel, fuel additive and as a green solvent which has received a great deal of attentions from both academia and industry. This review aims to summarise the advances in conversion of renewable feedstocks into GVL through heterogeneous catalytic transfer hydrogenation (CTH) with a strong emphasis on discussing preparation, characterisation and performance of the catalysts in order to provide a better understanding of various catalytic systems and also to compare them in terms of catalytic performance. © 2017 Society of Chemical Industry     

Planar array of corrugated tapered slot antennas for ultrawideband biomedical microwave imaging system

A planar antenna array that includes 12 corrugated tapered slot elements for use in ultrawideband (UWB) biomedical microwave imaging systems is presented. The used corrugate tapered slot antenna has a compact size, low profile, moderate gain, and distortionless performance in the time domain. The array is immersed in a carefully designed matching liquid of suitable dielectric constant to improve the matching between the array and the imaged object, and thus, to increase the dynamic range of the imaging system. A suitable platform is designed and fabricated to accommodate the array, breast phantom, and a coupling liquid for the case of UWB breast imaging. The design of the whole system is optimized using trust‐region framework method in the simulation tool CST Microwave Studio. The performance of the designed array is confirmed via measurements in a realistic imaging environment. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.     

Hypoglycemic effects of cocoa (Theobroma cacao L.) autolysates

Fat, alkaloid and polyphenol contents of two clones of cocoa (UIT1 and PBC 140) were removed and the remaining powder was autolyzed at pH 3.5 and 5.2. Based on the results, autolysates of UIT produced at pH 3.5 exhibited the highest ability to inhibit α-amylase activity. However, no α-glucosidase inhibition activity was observed under the conditions specified. Autolysates produced under pH 3.5 caused the highest amount of insulin secretion. In streptozotocin-diabetic rats, all cocoa autolysates significantly decreased blood glucose at 4 h. To assure that the results from the assays were not due to the polyphenols of cocoa autolysates qualitative and quantitative tests were applied. According to their results cocoa autolysates were found to be free from polyphenols. Analysis of amino acid composition revealed that cocoa autolysates were abundant in hydrophobic amino acids. It can be suggested that besides other compounds of cocoa, its peptides and amino acids could contribute to its health benefits.     

Efficient functionalization of multi‐walled carbon nanotubes with p‐aminophenol and their application in the fabrication of poly(amide‐imide)‐matrix composites

The ultrasonically assisted preparation and characterization of poly(amide‐imide) (PAI) composites containing functionalized multi‐walled carbon nanotubes (MWCNTs) are reported. To improve the dispersion in and compatibility with the polymer matrix, the MWCNTs were surface‐modified with p‐aminophenol (p‐AP) under microwave irradiation. The process is fast, one‐pot, easy and results in a high degree of functionalization as well as dispersibility in organic solvents. The p‐AP‐functionalized MWCNTs (MWCNTs‐AP) were analysed by means of field emission and transmission electron microscopy, Fourier transform infrared spectroscopy, X‐ray diffraction and thermogravimetric analysis (TGA). The results consistently confirm the formation of p‐AP functionalities on MWCNTs which are able to undergo additional reactions, while the structure of the MWCNTs remains relatively intact. MWCNTs‐AP/PAI hybrid films were prepared with various MWCNTs‐AP contents (5–15 wt%) using a solution‐casting technique. Microscopic observations show that the dispersion of the MWCNTs‐AP is improved as a result of the organic groups on the MWCNT surface and functional groups in the PAI structure. The properties of the obtained composites were characterized extensively using the aforementioned techniques. TGA results show that the hybrid films exhibit a good thermal stability. Tensile mechanical testing was performed for the prepared composites, the results of which indicate an increase in the elastic modulus and tensile strength with increasing MWCNTs‐AP content. © 2013 Society of Chemical Industry     

Prediction of carbon dioxide separation from gas mixtures in petroleum industries using the Levenberg–Marquardt algorithm

In this study, two mathematical models for hydrate formation process to separate carbon dioxide by a combination of two different kinds of organic and surfactant promoters are presented. Promoters such as sodium dodecyl sulfate, sodium dodecyl benzene sulfonate, and dodecyl trimethyl ammonium chloride as surfactant promoters; also, tetrahydrofuran, cyclopentane, 1,3-dioxolane, and 2-methyl tetrahydrofuran as organic promoters have been used in recent years. The results showed that a combination of 3000 ppm of surfactant promoters and 4 wt% organic promoters had the highest separation rate of carbon dioxide and; consequently, the investigated models were based on this optimum condition. As a matter of fact, by using these simulations the hydrate formation behavior was predicted with high accuracy; moreover, conducting consuming experiments is not essential anymore. To sum up, in the present research both Vandermonde matrix model and Levenberg-Marquardt algorithm were applied to predict the hydrate formation behavior; in addition, their results were precisely considered and validated with experimental data.     

Phase Transformations of α-Alumina Made from Waste Aluminum via a Precipitation Technique

We report on a recycling project in which α-Al₂O₃ was produced from aluminum cans because no such work has been reported in literature. Heated aluminum cans were mixed with 8.0 M of H₂SO₄ solution to form an Al₂(SO₄)₃ solution. The Al₂(SO₄)₃ salt was contained in a white semi-liquid solution with excess H₂SO₄; some unreacted aluminum pieces were also present. The solution was filtered and mixed with ethanol in a ratio of 2:3, to form a white solid of Al₂(SO₄)₃·18H₂O. The Al₂(SO₄)₃·18H₂O was calcined in an electrical furnace for 3 h at temperatures of 400–1400 °C. The heating and cooling rates were 10 °C/min. XRD was used to investigate the phase changes at different temperatures and XRF was used to determine the elemental composition in the alumina produced. A series of different alumina compositions, made by repeated dehydration and desulfonation of the Al₂(SO₄)₃·18H₂O, is reported. All transitional alumina phases produced at low temperatures were converted to α-Al₂O₃ at high temperatures. The X-ray diffraction results indicated that the α-Al₂O₃ phase was realized when the calcination temperature was at 1200 °C or higher.