Barrier,Biodegradation, and mechanical properties of (Rice husk)/(Montmorillonite) hybrid filler‐filled low‐density polyethylene nanocomposite films

Rice husk (RH)/montmorillonite (MMT) hybrid filler‐filled low‐density polyethylene nanocomposite films were prepared by extrusion blown film. RH was used as a biodegradable filler in various concentrations (2, 5, and 7 parts per hundred composite), while the amount of MMT was held constant at 2 wt%. Delamination of MMT platelets and distribution of RH were investigated by X‐ray diffraction and scanning electron microscopy. Diffractograms revealed the formation of intercalated structures, regardless of the RH content. Barrier properties revealed that MMT platelets have the potential to retard the diffusion of permeating molecules while, on the other hand, barrier efficiency of MMT is balanced by the subsequent incorporation of RH in RH/MMT hybrid filler‐filled composite films. Despite an increase in permeability, the selectivity ratio (CO₂/O₂ permeability) increased with increasing RH contents in the hybrid filler‐filled composite films showing the potential of these films in the development of modified atmosphere for fresh fruits and vegetables. The colonization of fungus and formation of holes as observed in micrographs of the test samples subjected to soil burial revealed that the biodegradation rate increased with the incorporation of RH in the hybrid composites. The composite films with higher contents of RH in hybrid filler are also more biodegradable than those having lower contents. Addition of RH contents in the hybrid filler increased the tensile modulus, while decreasing the tensile and tear strength. Addition of RH in the hybrid filler increased the melting and crystallization temperatures of the resulting nanocomposite films as well. J. VINYL ADDIT. TECHNOL., 23:162–171, 2017. © 2015 Society of Plastics Engineers     

Recent Advances on the Role of Brain-Derived Neurotrophic Factor (BDNF) in Neurodegenerative Diseases

Neurotrophins, such as brain-derived neurotrophic factor (BDNF), are essential for neuronal survival and growth. The signaling cascades initiated by BDNF and its receptor are the key regulators of synaptic plasticity, which plays important role in learning and memory formation. Changes in BDNF levels and signaling pathways have been identified in several neurodegenerative diseases, including Alzheimer’s disease, Parkinson’s disease, and Huntington’s disease, and have been linked with the symptoms and course of these diseases. This review summarizes the current understanding of the role of BDNF in several neurodegenerative diseases, as well as the underlying molecular mechanism. The therapeutic potential of BDNF treatment is also discussed, in the hope of discovering new avenues for the treatment of neurodegenerative diseases.     

A Hybrid Centralized Routing Protocol for 802.11s WMNs

Wireless mesh networks (WMNs) are being widely accepted as a critical wireless access solution for various applications. Due to minimal mobility in mesh nodes, a backbone topology can be effectively maintained in WMN using a proactive routing protocol. In IEEE 802.11s standard, a tree-based routing (TBR) protocol is adopted as a viable proactive routing protocol for a WMN with user traffic flowing to/from a wired network through a root (i.e., a mesh portal). However, the performance of the TBR protocol degrades rapidly as the user traffic becomes dominated by intra-mesh traffic. The reason is that the routing path through the root even for intra-mesh traffic unnecessarily overloads the root. Furthermore, the TBR performance becomes more severe when the network size of WMN is large, which could lead to the huge amount of intra-mesh traffic towards the root. To overcome these problems, we propose a new routing mechanism, root driven routing (RDR) protocol, for the root to quickly determine the best-metric route for any source-destination pair of intra-mesh traffic. For inter-mesh traffic, the original TBR protocol is employed. Thus, the hybrid centralized routing protocol that combines TBR and RDR and is adaptive to all traffic scenarios. Our simulation results reveal that the proposed RDR protocol outperforms the TBR protocol with much lower average end-to-end delay and much higher packet delivery ratio for intra-mesh traffic. The simulation results also provide some insight into the right tradeoff between the TBR protocol and the RDR protocol to achieve the best performance of the hybrid centralized routing protocol for WMNs.     

Use of epoxidized natural rubber as a toughening agent in plastics

At present, the rubber toughening of plastics has become an attractive field of study in polymer science and technology because brittleness is known to be a drawback in many engineering plastics; it can cause premature failure during application. Among existing rubber materials, epoxidized natural rubber (ENR) has been widely used as an impact modifier or toughening agent in a large number of engineering plastics; in particular, it enhances the impact strength, which deteriorates with the incorporation of other additives, such as fillers and flame retardants. ENR is a modification product from natural rubber produced via an epoxidation reaction. ENR also has good chemical resistance. In this review, we aim to provide a concise current status in the field of ENR toughening agents for plastics with a brief discussion of their associated problems and potential applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42270.     

Tensile properties of a poly(vinyl chloride) composite filled with poly(methyl methacrylate) grafted to oil palm empty fruit bunches

The influence of oil palm empty fruit bunch (OPEFB) fiber and oil palm empty fruit bunches grafted with poly(methyl methacrylate) (OPEFB‐g‐PMMA) on the tensile properties of poly(vinyl chloride) (PVC) was investigated. The OPEFB‐g‐PMMA fiber was first prepared with the optimum conditions for the grafting reaction, which were determined in our previous study. To produce composites, the PVC resin, OPEFB‐g‐PMMA fiber or ungrafted OPEFB fiber, and other additives were first dry‐blended with a laboratory blender before being milled into sheets on a two‐roll mill. Test specimens were then hot‐pressed, and then the tensile properties were determined. A comparison with the composite filled with the ungrafted OPEFB fiber showed that the tensile strength and elongation at break increased, whereas Young's modulus decreased, with the incorporation of 20 phr OPEFB‐g‐PMMA fiber into the PVC matrix. The trend of the tensile properties obtained in this study was supported by functional group analysis, glass‐transition temperature measurements, and surface morphological analysis. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Some thoughts on bondability and strength of gold wire bonding

The bonding mechanisms of gold, to give the desired strength of wire bonding, still require detailed investigation, including establishing adequate and reliable testing procedures. The current practices for analysing the mechanisms of wire bonding are inadequate and do not provide a comprehensive picture. This is because the focus of the tests is not clear, which causes variation in the results obtained, changing the conclusions about the responsible mechanism. Furthermore, as the size of Au wire bonds decreases, the mechanism responsible for thermosonic Au wire bonding may change. This paper provides a comprehensive analysis of the current and possible future methods for elaborating the bonding mechanism and strength of thermosonic Au wire bonds. We discuss the testing methods, their limitations and advantages, and suggest ways in which they can be improved.     

Mechanical and thermal properties of calcium carbonate‐filled PP/LLDPE composite

Polymer blends typically are the most economical means to develop new resins for specific applications with the best cost/performance balance. In this paper, the mechanical properties, melting, glass transition, and crystallization behavoir of 80 phr polypropylene (PP) with varying weights of linear low density polyethylene (LLDPE) at 10, 20/ 20 wt % CaCO₃, 30, 40, and 50 phr were studied. A variety of physical properties such as tensile strength, impact strength, and flexural strength of these blends were evaluated. The compatibility of these composite was examined by differential scanning calorimetry (DSC) to estimate T_m and T_c, and by dynamic mechanical analysis (DMA) to estimate T_g. The fractographic analysis of these blends was examined by scanning electron microscopy (SEM). It has been confirmed that increasing the LLDPE content trends to decreases the tensile strength and flexural strength. However, increasing the LLDPE content led to increases in the impact strength of PP/LLDPE blends. It was also found that up to 40 phr the corresponding melting point (T_m) was not effected with increasing LLDPE content. Each compound has more than one T_g, which was informed that there is a brittle‐ductile transition in fracture nature of these blends, the amount of material plastically deformed on the failure surface seems to increase with the increasing the LLDPE content. And PP/LLDPE blends at temperature (23°C) showed a ductile fracture mode characterized by the co‐existence of a shear yielding process; whereas at lower temperature (−20°C) the fractured surfaces of specimens appear completely brittle. The specimens broke into two pieces with no evidence of stress whitening, permanent macroscopic deformation or yielding. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Generating Synthetic Rainfall Total Using Multivariate Skew-<Emphasis Type="Italic">t</Emphasis> and Checkerboard Copula of Maximum Entropy

This study aims to test the appropriateness of multivariate skew-t copula and checkerboard copula of maximum entropy in generating monthly rainfall total data. The generation of synthetic data is important, as it provides hypothetical data in areas for which data availability remains limited. Three selected meteorological stations in Kelantan, Malaysia, Stesen Pertanian Melor, Rumah Pam Salor, and Ladang Lepan Kabu, are considered in this study. Monthly rainfall total data for the driest and wettest months in the year are tested in this study. For these three stations, the identified month with the least total of rainfall received (driest) is May, while the month with the highest total of rainfall received (wettest) is November. The data is fitted to gamma distribution with the corresponding parameters estimated. The observed data will be transformed to be in unit uniform using the gamma marginal. The resulting data is compared to simulated uniform data generated using multivariate skew-t copula and checkerboard copula of maximum entropy models based on the correlation values of the observed and simulated data. Next, the Kolmogorov-Smirnov test is used to assess the fit between the observed and generated data. The results show that the values of simulated correlation coefficients do not differ much for gamma distribution, multivariate skew-t, and maximum entropy approaches. This implies that the multivariate skew-t and maximum entropy may be used to generate monthly rainfall total for cases in which actual data is unavailable.     

Mechanical,thermal, and morphological properties of graphene reinforced polycarbonate/acrylonitrile butadiene styrene nanocomposites

Nanocomposites of polycarbonate/acrylonitrile butadiene styrene (PC/ABS) with (70/30) composition containing different amounts of graphene nanoplates (GNPs) (1, 3, and 5 wt%) were prepared by melt‐blending in a twin‐screw extruder. The structural, morphological, mechanical, and thermal properties of the nanocomposites were investigated. The Young's modulus and flexural modulus of the nanocomposites were increased by 30 and 54%, respectively, when 3 wt% GNPs was added. The flexural strength and tensile strength of the PC/ABS/GNPs nanocomposites increased up to a loading of 3 wt% GNPs. The incorporation of GNPs enhanced the thermal stability and char yield of the nanocomposites. X‐ray diffraction and field emission scanning electron microscopy showed uniform dispersion and alignment of GNPs in PC/ABS matrix. The interaction between the GNPs and the PC/ABS matrix were confirmed by Fourier transform infrared spectra. Therefore, the PC/ABS/GNP nanocomposites with improved flexural and tensile properties, without loss of extensibility and good thermal properties may have promising applications in automotive, electric tools, household, communication, and safety appliances. POLYM. COMPOS., 37:1633–1640, 2016. © 2014 Society of Plastics Engineers     

Mechanical,thermal, tribological,and flammability properties of polybutylene terephthalate composites: Comparing the effects of synthetic wollastonite nanofibers,natural wollastonite,and graphene oxide

Polybutylene terephthalate (PBT) composites were prepared with 1.0 phr synthetic wollastonite nanofibers (SWN), natural wollastonite (NW) and graphene oxide (GO) to study the effect of different fillers on mechanical, thermal, tribological, and flammability properties. The properties of PBT composites are related to the size, structure, and interfacial adhesion of the fillers in PBT matrix. PBT/SWN demonstrated the highest tensile strength and Young's modulus (6% and 9% increment), followed by PBT/NW (1.3% and 7% increment) and PBT/GO (2% decrement and 4% increment). PBT/SWN gave the highest degradation temperature (409°C), followed by PBT/GO (404.7°C). The maximum enhancement in wear resistance (73%) by PBT/SWN and anti-friction performance (26%) by PBT/GO evinced the excellent load-bearing ability of SWN and the great lubricating effect of GO. PBT/NW had the lowest peak heat release rate, smoke, and carbon dioxide production rate. This study shows that PBT composites have great potential in different automotive applications.