Boundary instability of a two-dimensional electron fluid

It was shown previously that the current-carrying state of a Field Effect Transistor with asymmetric source and drain boundary conditions may become unstable against spontaneous generation of plasma waves [1]. By extending the analysis to the two-dimensional case we find that the dominant instability modes correspond to waves propagating in the direction perpendicular to the current and localized near the boundaries. This new type of instability should result in plasma turbulence with a broad frequency spectrum. More generally, it is shown that a similar instability might exist, when a strong enough current goes through a single boundary between the gated and ungated regions. The text was submitted by the authors in English.     

An NMR magnetometer with frequency modulation

An NMR tracking magnetometer, in which the frequency modulation is used instead of the traditional magnetic modulation, is described. Owing to the proposed digital compensation of modulation shifts, the tracking error is negligibly small and does not exceed the corresponding error for NMR magnetometers with magnetic modulation. The absence of the modulation rings decreases the sizes of the sensors to the utmost and excludes their effect on the surrounding systems. 50%-deuteron saturated solution of lithium chloride in water of 50% deuterons, which is used as a sensor substance, allows one to measure magnetic fields of 0.0625 to 15.3 T with a 10^?7 relative error at the most.     

Nickel and chromium cycles: Stocks and flows project part IV

Nickel and chromium are essential ingredients in alloys increasingly important for energy-efficient, environmentally friendly modern technology. Quantitative assessment of the flows of these metals through the world economy from resource extraction to final disposal informs resource policy, energy planning, environmental science, and waste management. This article summarizes the worldwide technological cycles of nickel and chromium in 2000. Stainless steel is the major use of these metals, but they serve numerous other special needs, as in superalloys for high-temperature service, as plating materials, and in coinage. Because they are used primarily in alloys, novel recycling issues arise as their use becomes more widespread. “... the great New York and St. Louis double track, nickel plated railroad...” — Norwalk, Ohio, Chronicle 10 March 1881 announces arrival of surveyors for the future Nickel Plate Railway “Later [1911] I formed an alloy of Iron and Chromium, which showed remarkable resistance to rust and tarnish ... [It was] rediscovered by an Englishman named Brearley, in 1914.” —Elwood Haynes to Stephen F. Roberts, 17 January 1925     

The CORSET time-of-flight spectrometer for measuring binary products of nuclear reactions

The CORSET time-of-flight spectrometer has been developed at the Flerov Laboratory of Nuclear Reactions of the Joint Institute for Nuclear Research (Dubna, Russia) for investigating binary products of nuclear reactions. The spectrometer has been used to study the dynamics of fusion-fission and quasi-fission of superheavy elements. The design and the main characteristics of the spectrometer, as well as the algorithms for deducing the mass-energy distributions of fragments and the cross sections of nuclear reactions, are presented. The spectrometer contains two time-of-flight arms based on microchannel-plate detectors and three telescopes, each of which is composed of two microchannel-plate detectors and one semiconductor detector. A system of four semiconductor detectors is used to obtain the absolute value of a cross section. The time resolution of the time-of-flight arms is 150 ps, which allows the time-of-flight distances to be set at 10–20 cm, thus providing a mass resolution of 3 amu and an angular resolution of 0.3°. Owing to these characteristics, the spectrometer can be used as a trigger in multidetector setups for measuring light charged particles, neutrons, and γ rays in coincidence with reaction fragments.     

Theoretical Investigation of Metal Cladding for Nanowire and Cylindrical Micropost Lasers

We investigate the transverse modal properties of cylindrical subwavelength metal-clad nanowire and micropost lasers via rigorous theoretical waveguide analysis, including the effects of finite thickness metal cladding and gain in the core. The results of this analysis show that air-metal surface guided TM₀₁ and some hybrid surface guided modes suffer less loss but are less confined to the core, while core-metal surface guided modes are better confined to the core but suffer greater loss. An increase in the thickness of the metal cladding reduces the loss of the core-metal surface guided modes. The modal gain and confinement of the metal-clad cavity are compared to an unclad cavity.     

Aluminium content of Spanish infant formula

Levels of aluminium in 82 different infant formulae from nine different manufacturers in Spain were determined by acid-microwave digestion and graphite furnace atomic absorption spectrophotometry. The influence of aluminium content in tap water in reconstituted powder formulae was examined and an estimate was made of the theoretical toxic aluminium intake in comparison with the provisional tolerable weekly intake (PTWI). Possible interactions between aluminium and certain essential trace elements added to infant formulations have been studied according to the type or main protein-based infant formula. In general, the infant formulae contained a higher aluminium content than that found in human milk, especially in the case of soya, preterm or hydrolysed casein-based formulae. Standard formulae gave lower aluminium intakes amounting to about 4% PTWI. Specialized and preterm formulae resulted in a moderate intake (11-12 and 8-10% PTWI, respectively) and soya formulae contributed the highest intake (15% PTWI). Aluminium exposure from drinking water used for powder formula reconstitution was not considered a potential risk. In accordance with the present state of knowledge about aluminium toxicity, it seems prudent to call for continued efforts to standardize routine quality control and reduce aluminium levels in infant formula as well as to keep the aluminium concentration under 300 μg l^-1 for all infant formulae, most specifically those formulae for premature and low birth neonates.     

Thixomolded magnesium alloys: Strategic product innovation in automobiles

The research on magnesium alloys for structural lightweight applications is today at an embryonic stage, but these alloys offer great potential. Thixomolding of magnesium alloys for automotive applications is promising since the process can be used to manufacture net-shape parts cost-effectively and with high reliability and repeatability.     

Zero-valent iron treatment of RDX-containing and perchlorate-containing wastewaters from an ammunition-manufacturing plant at elevated temperatures.

The use of zero-valent iron for treating wastewaters containing RDX and perchlorate from an army ammunition plant (AAP) in the USA at elevated temperatures and moderately elevated temperature with chemical addition was evaluated through batch and column experiments. RDX in the wastewater was completely removed in an iron column after 6.4 minutes. Increasing the temperature to 75 degrees C decreased the required retention time to 2.1 minutes for complete RDX removal. Perchlorate in the wastewater was completely removed by iron at an elevated temperature of 150 degrees C in batch reactors in 6 hours without pH control. Significant reduction of perchlorate by zero-valent iron was also achieved at a more moderate temperature (75 degrees C) through use of a 0.2 M acetate buffer. Based on the evaluation results, we propose two innovative processes for treating RDX-containing and perchlorate-containing wastewaters: a temperature and pressure-controlled batch iron reactor and subsequent oxidation by existing industrial wastewater treatment plant; and reduction by consecutive iron columns with heating and acid addition capabilities and subsequent oxidation.