Effect of agitation, turbidity, aluminium foil reflectors and container volume on the inactivation efficiency of batch-process solar disinfectors

We report the results of experiments designed to improve the efficacy of the solar disinfection of drinking water, inactivation process. The effects of periodic agitation, covering the rear surface of the container with aluminium foil, container volume and turbidity on the solar inactivation kinetics of Escherichia coli (starting population = 10(6) CFU ml(-1)) were investigated. It was shown that agitation promoted the release of dissolved oxygen from water with subsequent decrease in the inactivation rates of E. coli. In contrast, covering the rear surface of the solar disinfection container with aluminium foil improved the inactivation efficiency of the system. The mean decay constant for bacterial populations in foil-backed bottles was found to be a factor of 1.85 (std. dev. = 0.43) higher than that of non-foil-backed bottles. Inactivation rates decrease as turbidity increases. However, total inactivation was achievable in 300 NTU samples within 8 h exposure to strong sunshine. Inactivation kinetics was not dependent on the volume of the water container for volumes in the range 500-1500 ml.     

Elimination of beta-blockers in sewage treatment plants

beta-Blockers are used to treat high blood pressure as well as patients recovering from heart attacks. In several studies, they were detected in surface water, thus indicating incomplete degradability of these substances in sewage treatment plants (STPs). In this study, we determined the sorption coefficients (K(D)) and degradation rates of the four beta-blockers sotalol, atenolol, metoprolol and propranolol in sludge from an STP operating with municipal wastewater. The sorption coefficients (K(D), standard deviations in brackets) were determined as 0.04(+/-0.035), 0.04(+/-0.033), 0.00(+/-0.023) and 0.32(+/-0.058) Lg(-1)(COD), and the pseudo-first-order degradation rate constants were estimated to be 0.29(+/-0.02), 0.69(+/-0.05), 0.58(+/-0.05) and 0.39(+/-0.07) Ld(-1)g(-1)(COD) for sotalol, atenolol, metoprolol and propranolol, respectively. These values translate into a typical elimination in STPs (sludge concentrations of 4g(COD)L(-1) and a hydraulic retention time of 6h) of 25%, 37%, 44% and 50% for sotalol, propranolol, metoprolol and atenolol, respectively. These results are also confirmed by measurements in two municipal STPs for atenolol, sotalol and propranolol. The estimated eliminations are slightly too high for metoprolol.     

Mobilization of lead from human bone tissue during pregnancy and lactation--a summary of long-term research

The skeleton is potential endogenous source of lead during pregnancy and lactation. We have undertaken a longitudinal investigation into the mobilization of lead from the human maternal skeleton to determine whether lead is mobilized from the maternal skeleton during pregnancy and lactation, and if so, when and how much is released. Subjects in the study were migrants to Australia (n=15) whose skeletal lead isotopic composition (endogenous lead) was different to that prevailing in the Australian environment (exogenous lead). This migrant cohort was compared with 6 multi-generational Australian controls. Biological and environmental samples were taken pre-pregnancy where possible, throughout pregnancy and postpartum for at least 6 months. Newly-born infants of the migrant and Australian mothers were monitored for 6 months. Blood lead concentrations for the migrant mothers ranged from 1.5 to 20 microg/dl (geometric mean 2.8) and for Australian mothers ranged from 1.9 to 4.3 microg/dl (geometric mean 2.9). There was minimal change in lead isotopic composition of the Australian pregnant controls although there were increases of approximately 40% in blood lead concentration in 3 of 6 cases during the postpartum period and from 0 to 12% in the other 3. In the migrant pregnant subjects, the geometric mean skeletal lead contribution to blood lead using the isotopic composition was approximately 33% (range 10-88%) for 14 subjects using a revised estimate for exogenous lead. Skeletal contribution to blood lead during the postpartum period was significantly greater than during pregnancy (P<0.001). The skeletal contributions to blood lead are higher and the changes are more consistent in those subjects who conceived within 100 days of arrival in Australia compared with those who conceived longer than 100 days. In the migrant subjects, changes in blood lead concentration during pregnancy and postpartum varied from subject to subject with an overall 20% increase; the increases during the postpartum period were greater than during pregnancy (P<0.001). It was estimated that the amount of maternal skeletal lead mobilized during pregnancy and transferred to the infant via cord blood averaged approximately 79%. The increased skeletal contribution to blood lead is attributed to a low daily calcium intake of approximately 500 mgCa/day, a condition which was present in both migrant and Australian subjects. An ongoing clinical trial is providing a new cohort with calcium supplements. A summary of other aspects of the study is included and covers: additional flux released from the skeleton during pregnancy and postpartum; XRF bone lead results; urinary excretion of lead during pregnancy and postpartum; dietary contribution to blood lead in female adults and children; comparison of rates of exchange of lead in blood of newly-born infants and mothers; relationships of lead in breast milk to lead in blood, urine and diet of the infant and mother; changes in blood lead after cessation of breastfeeding; urinary lead isotopes during pregnancy and postpartum indicate no preferential partitioning of endogenous lead into plasma; a comparison of some aspects of the nonhuman primate and human pregnancy studies.     

Passage of selected heavy metals from Sphaerotilus (bacteria: chlamydobacteriales) to Paramecium caudatum (protozoa: ciliata)

Sphaerotilus, a bacterium occurring in polluted waters, was found to take up Zn, Pb, Ni and Mn. Metal-containing cultures of this bacterium were employed to feed the protozoan Paramecium caudatum, and analytical results revealed the accumulation of Zn, Pb and Ni. Since Sphaerotilus was the only food source for paramecia during this study, the results indicate that trace amounts of metals were passed from bacteria to protozoa in a predator-prey relationship.     

ASSESSING AND MANAGING THE RISKS OF PATHOGEN TRANSFER FROM LIVESTOCK MANURES INTO THE FOOD CHAIN

A review was undertaken of (a) the levels and prevalence of Salmonella spp., Campylobacter spp., Listeria monocytogenes, Escherichia coli 0157. Cryptosporidium parvum and Giardia intestinalis in livestock manure, and (b) factors which affect their survival during storage and following land application. Pathogens are commonly present in livestock manures and can survive in soil for several months or years after spreading or excretion onto land. Temperature was identified as being the most important factor influencing pathogen survival, although pH, UV light and drying were also important. Various practical measures to minimise the risk of pathogen transfer into the food chain were identified, including treatment, extended storage and no/harvest periods following land spreading. Guidelines are being developed on managing farm manures to minimise the risks of microbiological contamination of ready-to-eat crops.     

An experimental determination of combustibility

The author describes a laboratory method for determining ignitability, rate of heat release, and total heat release as a measure of the combustibility of materials. The results may be applied to building design and designation of contents with an eye towards reducing the possibility of a major fire. Note: Professor Smith is Director of Chemical Engineering Research, Engineering Experiment Station, The Ohio State University, Columbus, Ohio.     

Selective removal of gallium (III) from aqueous solutions containing zinc or aluminum using sodium di-(n-octyl) phosphinate

Gallium was removed selectively from aqueous solutions containing zinc or aluminum using sodium di-(n-octyl) phosphinate as a ligand (NaL). At low pH or low mole ratios, the gallium was removed by complexation with the ligand as GaL(3(S)), while the zinc or the aluminum remained in the solution. Nearly complete separation of gallium was obtained. By increasing the amount of ligand or by increasing the pH, the zinc or aluminum remaining in the solution was then removed as a solid complex: ZnL(2(S)) or AlL(3(S)), respectively. At a pH between 1.5 and 2 and a mole ratio ligand to total metals of 0.75 for zinc solutions and 1.0 for aluminum solutions, more than 98% of the gallium was selectively removed with a high molar selectivity, alpha(Ga/Zn) and alpha(Ga/Al), respectively. Over 95% of gallium was recovered from the solid GaL(3(S)) complex by treatment of the complex with a 3M NaOH solution and diethyl ether. The gallium was concentrated in the aqueous solution to 4 times its initial concentration and the ligand was extracted into the ether phase. After evaporation of the ether, 95% of the ligand was regenerated in its sodium form as a solid.     

Detection of enteric viruses, Giardia and Cryptosporidium in two different types of drinking water treatment facilities

In this study, two types of drinking water treatment facilities (two conventional drinking water treatment plants (DWTPs) and two compact units (Cus)) were compared referring to their production capacity. Water samples were collected from three main points: (a) different water treatment steps (b) washings of sand filters and (c) distribution system at different distances from the water treatment plants. Both viruses and protozoa were concentrated from each water sample by adsorption and accumulation on the same nitrocellulose membrane filters (0.45 microm pore size). Enteroviruses were detected by plaque infectivity assay in BGM cells and HAV, HEV and Norovirus were detected by RT-PCR. Giardia and Cryptosporidium were detected by conventional staining methods and PCR. The results revealed that enterovirus load at the intake ranged between 10-15 PFU/L for the two compact units and between 4.5 and 75 PFU/L for the two conventional DWTPs. The virus load in distribution system of the first type DWTPs at 1 km from the plant was the same as that of the intake. Viruses in the other type of treatment plants CUs at 1, 5 and 7 km, were much reduced. Investigation of raw water sediments of the two DWTPs showed enterovirus counts between 12 and 17.5 PFU/L. Virus count was reduced in sand of filters after washing. Giardia cysts were equally detected by microscopy and PCR in only intake samples of EL-Hawamdia CU (33.3%) and Meet Fares DWTP (50%). Cryptosporidium oocysts were equally detected by microscopy and PCR in intake samples of Abo EL-Nomros CU (100%), EL-Hawamdia CU (66.7%) and Fowa DWTP (50%). At Meet Fares DWTP three positive intake samples for Cryptosporidium were detected by PCR, compared with only two positive samples by microscopy. Giardia cysts and Cryptosporidium oocysts were detected in raw water sediment and sand of filters before washing. Only one sample from Meet Fares DWTP sand of filters after washing was positive for both Giardia and Cryptosporidium. It can be concluded that the poor microbial quality of the water may be due to improper operational skills and management of the various water treatment plants (especially at the two high capacity treatment plants).     

Use of driven piles in rammed holes during construction in soils prone to slump-type settlement

Conclusions The experiment with the use of piles cast in rammed holes in lieu of continuous foundations placed on a bed compacted by tamping produced positive results and will be expanded upon further, since the strength properties of the materials in the foundations and the soils in the foundation beds can be more fully utilized, the reliability of the structure increased, the volume of earthwork reduced, labor and material outlays diminished, and the rate of construction and the level of the industrial nature of the work increased.State Institute for the Projection of the Greenhouse Industry. Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 2, p. 10, March–April, 1977.     

Synthesis of ettringite: a way to deal with the acid wastewaters of aluminium anodising industry

Synthesis of ettringite from acid wastewaters of the aluminium anodising industry has been studied as a possible route of reducing the emissions to the environment, recovering at the same time resource materials as a useful marketable mineral. Wastewaters of different concentrations have been subjected to the process of synthesis suspending calcium oxide and calcium aluminate powders at different time and pH conditions. High caustic alkalinity (pH approximately 12) and low sulphate concentrations (<0.1 M) are the most suitable conditions to synthesise ettringite. The mineral characterisation has been performed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and differential thermal analysis (DTA), proving the high purity of the pursued solid product when hydrated in the appropriate sodium hydroxide concentrations. In such conditions, around 90% of the aluminium initially present in the wastewater solutions is recovered in the form of ettringite.