THE INFLUENCE OF LOAD MISALIGNMENT DURING UNIAXIAL LOW-CYCLE FATIGUE TESTING—I: MODELLING

Abstract— A quantitative model has been proposed which predicts the extent of lifetime scatter in low-cycle fatigue due to the influence of bending caused by load misalignment. The main components of the model are the mechanism of bending, the type of extensometer used to control strain and the fatigue characteristics of the material being assessed. Three mechanisms of bending have been studied and it is argued that the most damaging one is a consequence of a lateral offset in the centre-lines of the load-train with respect to either a machine's frame or ram. Scatter in lifetime is a maximum when strain is controlled by a single extensometer (which is generally the case) and when fatigue behaviour is dictated by crack initiation at the largest surface defect. Two types of scatter have been examined, (i) repeatability scatter due to testing practice within a single laboratory, and (ii) reproducibility scatter between laboratories. An example of the magnitude of reproducibility scatter due to bending has been given by using an equation based on the universal slopes method due to Manson.     

Drug therapy of hemiballism. Review of the literature and personal observations

Hemiballism is a rare hyperkinetic disorder which is characterized by irregular vigorous rotatory movements of the limbs of one side of the body. The disabling and exhausting movements with their high risk of severe injuries require an acute drug treatment. However, there are no common guidelines for the treatment of this disorder. Therefore we reviewed the available literature to establish a concept for a rational symptomatic drug treatment. Furthermore, own observations in 6 patients with hemiballism of different origins are reported.     

Dynamic lithium-ion battery model for system simulation

Presents here a complete dynamic model of a lithium ion battery that is suitable for virtual-prototyping of portable battery-powered systems. The model accounts for nonlinear equilibrium potentials, rate- and temperature-dependencies, thermal effects and response to transient power demand. The model is based on publicly available data such as the manufacturers' data sheets. The Sony US18650 is used as an example. The model output agrees both with manufacturer's data and with experimental results. The model can be easily modified to fit data from different batteries and can be extended for wide dynamic ranges of different temperatures and current rates.     

Solar/UV-induced photocatalytic degradation of three commercial textile dyes.

The photocatalytic degradation of three commercial textile dyes with different structure has been investigated using TiO(2) (Degussa P25) photocatalyst in aqueous solution under solar irradiation. Experiments were conducted to optimise various parameters viz. amount of catalyst, concentration of dye, pH and solar light intensity. Degradation of all the dyes were examined by using chemical oxygen demand (COD) method. The degradation efficiency of the three dyes is as follows: Reactive Yellow 17(RY17) > Reactive Red 2(RR2) > Reactive Blue 4 (RB4), respectively. The experimental results indicate that TiO(2) (Degussa P25) is the best catalyst in comparison with other commercial photocatalysts such as, TiO(2) (Merck), ZnO, ZrO(2), WO(3) and CdS. Though the UV irradiation can efficiently degrade the dyes, naturally abundant solar irradiation is also very effective in the mineralisation of dyes. The comparison between thin-film coating and aqueous slurry method reveals that slurry method is more efficient than coating but the problems of leaching and the requirement of separation can be avoided by using coating technique. These observations indicate that all the three dyes could be degraded completely at different time intervals. Hence, it may be a viable technique for the safe disposal of textile wastewater into the water streams.     

Equipment for Testing Sheet Structural Materials under Biaxial Tension. Part 2. Testing by Biaxial Loading in the Plane of the Sheet

We analyze specific features of the design of equipment used for mechanical testing of sheet structural materials under the conditions of biaxial static, cyclic, or dynamic loading. We propose original solutions of the problems related to the fatigue testing of crosslike specimens performed without using complex hydraulic systems and their dynamic testing carried out by using very simple testing machines for uniaxial tension–compression.     

Prediction of processing-induced distortion of curved flanged composite laminates

It is well known that angles in composite parts contract as they are cooled down from the curing temperature, this is often referred to as spring-in. It is caused mainly by the significantly different thermal contractions and cure shrinkage's experienced between the fibre direction and the through-thickness direction during the manufacturing process. A number of works have reported on the spring-in of straight angle composite parts. However, little has been done to investigate the distortion of curved flanged composite parts, which will distort differently owing to the introduction of the additional curvature, thus constraint.

In the present work, the distortion of the circularly curved flanged laminates is studied numerically. The finite element method is used to predict the processing-induced distortion of the part with two different approaches. In the first approach, the shear angles of the composite plies are predicted by a draping analysis. The effect of the fibre shearing on the mechanical properties of the laminates is considered in the model used to predict the distortion. The second simplified approach assumes that the in-plane properties of the laminates are isotropic. The results obtained by these two approaches are compared with those obtained experimentally.     

Tunneling spectroscopy of palladium-barium emitters

The surface of a palladium-barium cathode was studied using scanning probe microscopy techniques. Data from the tunneling spectroscopy showed the pattern of the electron work function distribution over a microscopic region on the emitter surface. This pattern is compared to the distribution of various phases in the palladium-barium alloy employed.