������Ȼ����̽ȡ�õ�ͻ��

鄂尔多斯盆地油气资源丰富 ,目前已累计探明天然气地质储量 1 18× 10 12 m3 ,成为了中国第一个天然气探明储量超过万亿立方米的大气区。长庆油田作为盆地勘探的主体 ,在 30余年的天然气勘探历程中 ,经历曲折和挫折 ,终于取得了令人瞩目的突破。靖边下古生界气田 (长庆气田 )的发现 ,即是解放思想 ,重新认识 ,改变构造成藏的认识 ,提出风化壳古地貌成藏认识的结果 ;榆林气田和苏里格气田的探明 ,则是解放思想 ,提出上古生界大面积含气背景下 ,存在高渗储层而坚持勘探的成果。天然气勘探取得突破是勘探者解放思想 ,对盆地特征重新认识 ,应用勘探新理论 ,改变勘探思路的结果。     

论西北地区地下水的开发利用与保护

本文通过分析西北地区的水资源时空分布特点和水循环特点、地下水开发利用现状以及开发利用中出现的生态环境问题，总结了西北地区多年来水资源开发利用的成功经验和失败教训，提出今后地下水资源合理开发利用的几点建议：即提高社会对西北地区地下水的认识，适度增大地下水开采；充分发挥地下水的一态环境调节作用，水资源开发与生态环境保护并举；遵循地表水与地下水的多次相互转化规律，提高水资源总体利用率；水资源开发利用与水资源涵养相结合；加强西北地区地下水的调查与研究。     

工业建筑多层框架的活荷载不利布置

以设防烈度为8度的框架厂房为例，详细分析了活荷载不利布置对框架梁、柱内力的影响，得出何时需要考虑活荷载不利布置、何时不需要考虑活荷载不利布置的结论，可供工程设计参考。     

低潮时期宽带网建设需要注意的问题

宽带建设低潮期实际上是一次优胜劣汰的过程,宽带运营竞争的手段将由低价竞争转向服务质量和特色的竞争。应在重视宽带接入建设的同时,也要重视业务运营管理平台的建设。应从长远考虑,不应仅为了节省投资而降低对设备的要求。由于降低成本的主要方向是在线缆部分,因此EVDSL技术应用的速度将大大超过人们的预期。在网络建设上,IPDSLAM虽有优势但也有不足,还需要进一步的成熟、稳定和实践的检验。     

FATIGUE DAMAGE IN 1045 STEEL UNDER VARIABLE AMPLITUDE BIAXIAL LOADING

Abstract— During constant amplitude loading, two different types of crack systems have been reported In the high cycle fatigue (HCF) region, cracks nucleate on a small number of maxium shear strain amplitude planes One of these cracks becomes a dominant crack and leads to failure of the specimen In the low cycle fatigue (LCF) region, equally developed microcracks are observed over the entire gage section and grow during the majority of the life. The failure is due to a linking in which the microcracks join up during the last few cycles of the fatigue life.
To investigate the interaction of these two types of crack systems in biaxial fatigue, experiments were performed on thin-wall tubular specimens in tension, torsion and combined tension-torsion loading The test program included step loading and block loading in which two equivalent strain amplitudes were employed. One of the equivalent strain amplitudes is in the HCF region and the other was in the LCF region
Fatigue lives were predicted from constant amplitude damage curves when a single crack system dominated the fatigue process Two competitive crack systems were sometimes developed on the maximum shear strain amplitude planes in a single specimen under block loading This resulted in a conservative prediction of the fatigue life.     

N,N''-取代邻苯二胺的合成

通过2-取代苯并咪唑盐的还原开环反应制备了8个N,N′-不同取代的邻苯二胺,并经1HNMR、IR、MS及元素分析表征,其中5个未见文献报道.这是一条由邻苯二胺和羧酸经2.取代苯并咪唑制取该类化合物的简洁合成路线.     

吊车防摆最优调节器设计

本文对吊车在吊装货物时如何消除货物的摆动进行了研究,提出了利用最优状态调节器进行消摆的方案,并进行了计算机仿真和在吊车模型上的实时控制实验,结果表明,该方法具有很好的消摆效果和较强的鲁棒性。     

Peracetic acid pretreatment of sugarcane bagasse for enzymatic hydrolysis: a continued work

Previous work has shown that the enzymatic hydrolysis of sugarcane bagasse could be greatly enhanced by peracetic acid (PAA) pretreatment. There are several factors affecting the enzymatic digestibility of the biomass, including lignin and hemicelluloses content, cellulose crystallinity, acetyl group content, accessible surface area and so on. The objective of this work is to analyze the mechanism of the enhancement of enzymatic digestibility caused by PAA pretreatment. Delignification resulted in an increase of the surface area and reduction of the irreversible absorption of cellulase, which helped to increase the enzymatic digestibility. The Fourier transform infrared (FTIR) spectrum showed that the absorption peaks of aromatic skeletal vibrations were weakened or disappeared after PAA pretreatment. However, the infrared crystallization index (N.O'KI) was increased. X‐ray diffraction (XRD) analysis indicated that the crystallinity of PAA‐treated samples was increased owing to the partial removal of amorphous lignin and hemicelluloses and probable physical change of cellulose. The effect of acetyl group content on enzymatic digestibility is negligible compared with the degree of delignification and crystallinity. The results indicate that enhancement of enzymatic digestibility of sugarcane bagasse by PAA pretreatment is achieved mainly by delignification and an increase in the surface area and exposure of cellulose fibers. Copyright © 2008 Society of Chemical Industry     

Local residence time,residence revolution,and residence volume distributions in twin‐screw extruders

This work was aimed at studying the overall, partial, and local residence time distributions (RTD); overall, partial and local residence revolution distributions (RRD) and overall, partial and local residence volume distributions (RVD) in a co‐rotating twin screw extruder, on the one hand; and establishing the relationships among them, on the other hand. Emphasis was placed on the effects of the type and geometry of mixing elements (a gear block and various types of kneading elements differing in staggering angle) and process parameters on the RTD, RRD and RVD. The overall and partial RTD were directly measured in‐line during the extrusion process and the local ones were calculated by deconvolution based on a statistical theory. The local RTD allowed comparing the mixing performance of mixing elements. Also it was confirmed both experimentally and theoretically that specific throughput, defined as a ratio of throughput (Q) over screw speed (N), controlled all the above three types of residence distributions, be they local, partial or overall. The RRD and RVD do not provide more information on an extrusion process than the corresponding RTD. Rather they are different ways of representing the same phenomena. POLYM. ENG. SCI., 48:19–28, 2008. © 2007 Society of Plastics Engineers