电子聚合物基体碳纳米管复合材料研究进展

电子聚合物是一种新型的功能材料，碳纳米管具有优异的力学性能和独特的电学性能等，是聚合物基体复合材料的理想增强体，按不同电子聚合物基体类型进行了归纳，评述了电子聚合物基体碳纳米管复合材料的制备，性能和应用等情况。     

Biphasic effects of intraaccumbens mu-opioid peptide agonist DAMGO on locomotor activities

The effects of bilateral microinjections of mu-opioid receptor agonist DAMGO (0.00, 0.01, 0.1, or 1.0 microgram/side) were tested in rats for 120 min in activity monitors. The horizontal movement, rearing, and stereotypy times in seconds were measured during 12 consecutive 10-min time blocks. DAMGO (0.01, 0.1, and 1.0 microgram) resulted in biphasic effects, inhibition followed by activation for each of the three measures. These data replicate the behavioral effects of ICV DAMGO except that the duration of the behavioral effects were longer with Acb injections.     

Cyclosporin A and cyclosporin SDZ PSC 833 enhance anti-CD5 ricin A-chain immunotoxins in human leukemic T cells

Recent studies have shown that cyclosporin A (CsA) may affect ricin A-chain immunotoxin (RTA-IT) therapy. In this study, we evaluated the ability of CsA and its nonimmunosuppressive analog, SDZ PSC 833, to enhance anti-CD5 T101 RTA-ITs in vitro. Both 4 mumol/L CsA and 4 mumol/L SDZ PSC 833 significantly and specifically enhanced the cytotoxic activity of T101 RTA-IT on the human lymphoblastic T-cell line, CEM III (101-fold and 105-fold, respectively). Furthermore, these Cs also enhanced the cytotoxicity of the more potent T101 F(ab')2 RTA-IT (ninefold and eightfold, respectively). The effect of human plasma, originating from four patients enrolled in a phase I high-dose CsA regimen, was examined on T101 RTA-IT cytotoxicity on CEM III cells. In each case, with plasma CsA levels between 3,090 and 4,860 ng/mL (2.5 to 4 mumol/L), a significant increase in T101 RTA-IT-mediated cytotoxicity was observed ranging from 31% to 60%. Neither CsA nor SDZ PSC 833 affected the rate of RTA-IT binding, internalization, intracellular trafficking, or degradation. Analysis of internalized T101 RTA-IT molecules showed that these were essentially intact, which suggests that these enhancers may act only on a small population of RTA-ITs that escapes present investigational techniques. In conclusion, because the concentrations used are clinically achievable, Cs appear to be promising agents for in vivo enhancement of RTA-ITs.     

中子产额大于1.5×10^10n／s的密封中子管

报道了一种中子产额大于１．５×１０１０ｎ／ｓ、靶和离子源都可拆卸的密封中子管，以它为核心研制的密封中子发生器已被用于中子照像等领域，并取得了较好的结果。     

Cr12钢的预处理工艺研究

本文研究了Ｃｒ１２钢经４种不同的预处理工艺处理后钢中碳化物的大小，数量，分布及钢的硬度，强度和韧性，试验结果表明，经调质处理，高温固溶淬火＋高温退火处理后，Ｃｒ１２钢中碳化物的大小，分布及其组织，性能均优于常规球化退火预处理的。通过扫描电镜对冲击断口的分析，初步探讨了新的预处理工艺提高韧性的原因。     

航空油品高频/高压电脱水微观机理

设计并建立了一套高压电物理化学显微分析装置，为研究高压电物理化学领域的微观机理提供了一种新的技术途径。采用该技术，研究了胜利稠油经6％加氢裂解柴油稀释的原料油的高频／高压电脱水的微观机理。该原料的脱水率达96．7％，高于传统的电脱水方法。     

适用于高速长途DWDM系统的色散管理线路

对于高速长途密集波分复用（DWDM）传输，必需采用各种各样的色散补偿、色散管理技术，其中，交替使用正负色散光纤构成色散管理线路（DML）是可行的解决方案之一，在国际上已经取得显著进展，正成为人们关注的焦点，国内在这方面的研究报道还少见.文章以高速长途DWDM系统对传输线路的性能要求为基础，综述了有代表性的3种不同类型的DML的特点和最新进展。     

Model-based automated extraction of microtubules from electron tomography volume.

We propose a model-based automated approach to extracting microtubules from noisy electron tomography volume. Our approach consists of volume enhancement, microtubule localization, and boundary segmentation to exploit the unique geometric and photometric properties of microtubules. The enhancement starts with an anisotropic invariant wavelet transform to enhance the microtubules globally, followed by a three-dimensional (3-D) tube-enhancing filter based on Weingarten matrix to further accentuate the tubular structures locally. The enhancement ends with a modified coherence-enhancing diffusion to complete the interruptions along the microtubules. The microtubules are then localized with a centerline extraction algorithm adapted for tubular objects. To perform segmentation, we novelly modify and extend active shape model method. We first use 3-D local surface enhancement to characterize the microtubule boundary and improve shape searching by relating the boundary strength with the weight matrix of the searching error. We then integrate the active shape model with Kalman filtering to utilize the longitudinal smoothness along the microtubules. The segmentation improved in this way is robust against missing boundaries and outliers that are often present in the tomography volume. Experimental results demonstrate that our automated method produces results close to those by manual process and uses only a fraction of the time of the latter.     

Modular and rapid testing of SOCs with unwrapped logic blocks

Extensive research has been carried out for test planning of core-based system-on-a-chip devices. Most of the prior work assumes that all of the embedded cores are wrapped for test purpose. However, some designs may contain user-defined logic or cores that cannot be wrapped due to area constraints or timing violations. This paper discusses how these unwrapped logic blocks can be tested rapidly by adapting the TestRail architecture, which uses only the test control mechanism and the test instructions available through the IEEE 1500 standard for embedded core test. A new test scheduling algorithm, which facilitates a concurrent test of both unwrapped logic blocks and IEEE 1500-wrapped cores, is proposed, and experiments show that it outperforms a previous approach when the available number of tester channels and/or the number of unwrapped logic blocks are small.