基于CaO引导的甲烷蒸汽重整化学链燃烧制氢系统

为在重整气中得到高纯H_2和降低尾气CO_2分离成本,建立了基于CaO引导的甲烷蒸汽重整化学链燃烧制氢系统,该系统在重整反应器中加入CaO吸收剂,用以吸收重整器内的CO_2,提高重整气中H_2浓度,形成的CaCO_3固体在煅烧器中受热分解重新生成CaO。利用Aspen Plus进行了过程模拟及热力学分析,并研究主要参数对系统性能的影响,得到优化的操作条件为:CaO循环量/CH_4比为0.5,CH_4(燃料)/CH_4比为0.35,NiO循环量/CH_4比为1.4。CaO循环量/CH_4比从0变化到0.5时,重整气中H_2浓度从0.60增长到0.99;CH_4(燃料)/CH_4比在0.25~0.45区间变化时,重整气中H_2浓度从0.86提高到0.99,产气量增加;NiO循环量/CH_4比在1~1.6区间变化时,重整气中H_2浓度从0.88增长到0.99,系统有效能效率变化较小。     

机械力化学湿法一步制备表面修饰磷酸锌微粉

以氧化锌和磷酸为原料,以硅烷偶联剂为改性剂,采用机械力化学湿法制备微细磷酸锌并进行表面改性.用XRD、润湿角、活化指数、沉降时间等手段对产物进行表征,用FT-IR对改性粉末的结构进行分析,初步探讨了偶联剂与磷酸锌的作用机理.结果表明产物为二水和四水磷酸锌混合物;在红外区域2 800～3 000 cm-1和1 400 cm-1有偶联剂的特征吸收峰,说明偶联剂与磷酸锌之间发生了化学反应;当硅烷偶联剂添加质量分数由0增加到2%,改性产品的活化指数由0增加到98.71%,对水的润湿角由0°增加到93.21°,沉降时间由0.5 h增加到176 h,在涂料中的分散性和贮存稳定性得到改进.     

混杂增强聚氨酯复合硬质泡沫塑料的研制

系统介绍混杂增强聚氨酯复合硬质泡沫塑料的制备情况，详细分析聚氨酯硬质泡沫塑料制备过程中的工艺问题，表征与分析其结构与性能，着重分析偶联剂对填充物增强性能的影响以及填充物含量对聚氨酯硬质泡沫塑料吸水性能的影响，介绍聚氨酯硬质泡沫塑料的应用，最后指出其发展前景。     

离子色谱法测定配煤、焦炭和焦油中的氯含量

研究了用带电导检测器的离子色谱对配煤、焦炭和焦油中的Cl- 进行测定的方法。在YSA型8126A-4# 阴离子分离柱上用3.5mmol/LNa2CO3、5.3mmol/LNaHCO3做淋洗液对Cl-进行测定,方法简便快速。Cl-的检出限为2×10-6。该法也适用于F-、NO2-、NO3-、SO42-等的测定。     

热塑性硬质聚氨酯泡沫在汽车顶内饰中的应用

概述了汽车顶内饰用热塑性聚氨酯硬质泡沫塑料进展状况，介绍了硬泡及顶内饰成型方法，对影响该硬泡性能的一些因素进行了讨论。指出该顶内饰已批量生产。     

浅谈P3软件在电力基建工程中的应用

P3软件是一套体现了现代化项目管理理念的项目管理工具，在建设管理上推广应用P3工程管理软件，可以提高各参建单位的工作效率、加快工程信息交流、数据共享和工程进度管理水平，在管理上尽快与国际接轨，本文就P3软件在电力基建工程中的应用做以简单介绍。     

Graft polymerization of acrylic acid onto polyphenylene sulfide nonwoven initiated by low temperature plasma

Graft copolymerization of acrylic acid (AA) onto polyphenylene sulfide (PPS) nonwoven initiated by low temperature plasma was studied. The effects of various conditions on graft reaction and the grafting rate were investigated. SEM images showed that PPS nonwoven was grafted, and the graft copolymerization only occurred on the surface of PPS. It may be due to the chain transference going with the graft copolymerization. It was found that with the increasing of plasma power, treatment time, space between electrodes, monomer concentration, and temperature of graft polymerization, the grafting rate increased at first, went to the top, and then decreased. The PPS nonwoven surface graft reaction could be optimized by the following processing conditions: 120 s of plasma treatment time, 50 W of plasma power, 1.5 cm of space between electrodes, 30% (w/w) of monomer concentration, and 50°C of temperature of graft polymerization. Measurement of XPS showed that the peak of C1s of graft polyacrylic acid was existed, and the peak area increased with the increase of the grafting rate. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5884–5889, 2006     

Three schemes of remote information concentration based on ancilla-free phase-covariant telecloning

In this paper, remote information concentration is investigated which is the reverse process of the $1\rightarrow 3$ optimal asymmetric economical phase-covariant telecloning (OAEPCT). The OAEPCT is different from the reverse process of optimal universal telecloning. It is shown that the quantum information via $1\rightarrow 3$ OAEPCT procedure can be remotely concentrated back to a single qubit with a certain probability via several quantum channels. In these schemes, we adopt Bell measurement to measure the joint systems and use projected measurement and positive operator-valued measure to recover the original quantum state. The results shows non-maximally entangled quantum resource can be applied to information concentration.