镀液流速对碳化硅微粒与铜共沉积的影响

本文利用易于控制流速的旋转圆盘电极研究了SiC微粒与Cu的共沉积。得出了在不同镀液流动速度下镀得的复合镀层中微粒含量与镀液中微粒浓度以及与电流密度之间的关系曲线,进而探讨了镀液流速对Cu-SiC共沉积的影响。镀液流速通过影响微粒与阴极之间的弱吸附影响微粒在阴极表面的停留,从而对Cu-SiC复合电沉积过程产生很大影响。     

A high propylene productivity over B2O3/SiO2@honeycomb cordierite catalyst for oxidative dehydrogenation of propane

Boron-based metal-free catalysts for oxidative dehydrogenation of propane (ODHP) have drawn great attention in both academia and industry due to their impressive activity and olefin selectivity. Herein, the SiO₂ and B₂O₃ sequentially coated honeycomb cordierite catalyst is designed by a two-step wash-coat method with different B₂O₃ loadings (0.1%-10%) and calcination temperatures (600, 700, 800 ℃). SiO₂ obtained by TEOS hydrolysis acts as a media layer to bridge the cordierite substrate and boron oxide via abundant Si-OH groups. The welldeveloped straight channels of honeycomb cordierite make it possible to carry out the reactor under high gas hourly space velocity (GHSV) and the thin wash-coated B₂O₃ layer can effectively facilitate the pore diffusion on the catalyst. The prepared B₂O₃/SiO₂@HC monolithic catalyst exhibits good catalytic performance at low boron oxide loading and achieves excellent propylene selectivity (86.0%), olefin selectivity (97.6%, propylene and ethylene) and negligible CO₂ (0.1%) at 16.9% propane conversion under high GHSV of 345,600 ml·(g B₂O₃)^-1·h^-1, leading to a high propylene space time yield of 15.7 g C₃H₆·(g B₂O₃)^-1·h^-1 by suppressing the overoxidation. The obtained results strongly indicate that the boron-based monolithic catalyst can be properly fabricated to warrant the high activity and high throughput with its high gas/surface ratio and straight channels.     

炭分子筛概述

阐述了炭分子筛分离的原理，并分别从其制备原料、制备方法、产品用途等方面综述了近年来炭分子筛的新进展。     

Communicating Is Crowdsourcing: Wi-Fi Indoor Localization with CSI-Based Speed Estimation

Numerous indoor localization techniques have been proposed recently to meet the intensive demand for location-based service (LBS). Among them, the most popular solutions are the Wi-Fi fingerprint-based approaches. The core challenge is to lower the cost of fingerprint site-survey. One of the trends is to collect the piecewise data from clients and establish the radio map in crowdsourcing manner. However the low participation rate blocks the practical use. In this work, we propose a passive crowdsourcing channel state information (CSI) based indoor localization scheme, C²IL. Despite a crowdsourcing based approach, our scheme is totally transparent to the client and the only requirement is to connect to our 802.11n access points (APs). C²IL is built upon an innovative method to accurately estimate the moving speed solely based on 802.11n CSI. Knowing the walking speed of a client and its surrounding APs, a graph matching algorithm is employed to extract the received signal strength (RSS) fingerprints and establish the fingerprint map. For localization phase, we design a trajectory clustering based localization algorithm to provide precise real-time indoor localization and tracking. We develop and deploy a practical working system of C²IL in a large office environment. Extensive evaluations indicate that the error of speed estimation is within 3%, and the localization error is within 2 m at 80% time in a very complex indoor environment.     

甲酸甲酯合成与转化的催化技术

本文评述了甲酸甲酯(MF)合成与转化的催化技术,展示了从MF出发发展C_1化学的可能途径,在MF的合成方面详细地分析了从甲醇出发的羰化法、脱氢法和氧化法催化技术,简介了我们的有关研究工作。     

Preparation and properties of high molecular weight poly(1-germa-) or poly(1-sila-cis-pent-3-enes)

High molecular weight poly(1,1-dimethyl-1-germa-cis-pent-3-ene), poly(1,1-diphenyl-1-germa-cis-pent-3-ene), poly(1,1-dimethyl-1-sila-cis-pent-3-ene), and poly(1-methyl-1-phenyl-1-sila-cis-pent-3-ene) have been prepared. The thermal stability of these polymers is found to increase with their molecular weight.     

充气压力对充气工况载重斜交轮胎影响的有限元分析

进行了充气压力对充气工况载重斜交轮胎影响的有限元分析.结果表明,充气工况下,充气压力对斜交轮胎外形轮廓尺寸影响明显,其外直径、断面宽度均随充气压力的增大而增加;充气压力的大小对胎圈接触应力分布影响很小,但胎圈最大接触应力随充气压力的增加而增大.     

Studies on membrane formation mechanism by the light transmission technique. I

New parameters, light transmission rate and minimum light transmissions, are proposed. These two parameters reflect the characteristics of the membrane‐forming system and the formation process of the membranes by phase inversion. The relationship between the light transmission and the porous structure of the membrane can be explained by the geometrical optics principles. Variation of the two parameters combining Reuvers's phase separation theory provided a convenient analytical method to predict effectively membrane morphologies. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 174–181, 2003     

碟式分离机转鼓零件的最宜超转速探讨

本文通过对超速处理后的AISI316L钢的碟式分离机转鼓零件在各种工况下的应力场分析,探讨了分离机转鼓超速自增强的最宜超转速问题,并提出了确定最宜超转速的基本原则和方法.通过分析表明:用本文方法所得到的最宜超转速与已知的国外数据是相当一致的.