A limit analysis of nonlinear elastic lateral displacements of thin-walled reinforced and prestressed beams

An incremental iterative process based on direct energy minimization is presented for a limit analysis of nonlinear elastic lateral displacements and twists of reinforced and prestressed beams. Problems encountered with the constitutive relations are discussed and two possible material models are presented.     

A study of the large strain deformation and failure behaviour of mixed biopolymer gels via in situ ESEM

A mixed biopolymer gel, consisting of a protein (gelatin) and polysaccharide (maltodextrin) mixture has been investigated. By controlling the composition it was possible to construct an ‘emulsion-like’ structure, with included spherical particles of one phase (maltodextrin) within a continuous matrix of the second (gelatin). Large strain deformation and failure behaviour of this system has been examined via in situ environmental scanning electron microscopy (ESEM). ESEM has been employed to explore the changes in the structure of the material, whilst allowing the sample to stay hydrated as it was subjected to tensile strain, thereby allowing simultaneous imaging and determination of stress-strain data of the native sample. Ductile behaviour was observed, which has been attributed to the stretching, tearing and fracture of gelatin ligaments and debonding at the interface between the maltodextrin particles and continuous gelatin matrix. Deformation and fracture of the maltodextrin particles during tensile testing was also observed. The interfacial fracture energy of the composite has been calculated following an elastomer composite-debonding model, although there are several limitations to this approach for the mixed gel. It was found in samples tested after different ageing times that the debonding stress and strain was decreasing with ageing leading to a lower interfacial fracture energy. Samples were also tested after successive loading cycles, which resulted in a mechanical strength decrease after each cycle.     

The secondary structure of phospholamban: a two-dimensional NMR study

Phospholamban (PLN) is an intrinsic membrane protein of 52 amino acids which regulates the Ca2+ pump of the sarcoplasmic reticulum of heart, slow-twitch and smooth muscle (SR): it is normally assumed to exist in the membrane as a homopentamer. A monomeric analogue of phospholamban PLN(C41F), in which Cys41 was replaced by a Phe, was synthesized and its conformation studied by 1H NMR spectroscopy in a 1:1 mixture of chloroform/methanol. Most of the resonances in the 1H NMR spectra were assigned. The work has shown that the C-terminal hydrophobic portion forms a very stable alpha-helix. The hydrophilic N-terminal part adopts an alpha-helix configuration which is much less stable except for the stretch containing the phosphorylation sites.     

The partial testing design: a less costly way to test equivalence for sensitivity and specificity

We propose a new, less costly, design to test the equivalence of digital versus analogue mammography in terms of sensitivity and specificity. Because breast cancer is a rare event among asymptomatic women, the sample size for testing equivalence of sensitivity is larger than that for testing equivalence of specificity. Hence calculations of sample size are based on sensitivity. With the proposed design it is possible to achieve the same power as a completely paired design by increasing the number of less costly analogue mammograms and not giving the more expensive digital mammograms to some randomly selected subjects who are negative on the analogue mammogram. The key idea is that subjects who are negative on the analogue mammogram are unlikely to have cancer and hence contribute less information for estimating sensitivity than subjects who are positive on the analogue mammogram. To ascertain disease state among subjects not biopsied, we propose another analogue mammogram at a later time determined by a natural history model. The design differs from a double sampling design because it compares two imperfect tests instead of combining information from a perfect and imperfect test.     

Preparation and evaluation of slow-release pan-coated indomethacin granules

Granules containing indomethacin crystals are coated with Eudragit solutions of different RL/RS ratios using a pan coating technique. The process is reproducible with regard to drug content, inexpensive and the formed granules were directly compressed into tablets. In vitro release of indomethacin from coated granules, tablets and capsules was studied as a function of different ratios of Eudragit RL/RS in the coating solution. The release of the drug was significantly reduced by the coating process in comparison with a formulation made from uncoated granules, prepared using 10 per cent gelatin solution as a binder. Release data were found to follow a diffusion-controlled model.     

Two residues that may ligate Ca2+ in transmembrane domain six of the plasma membrane Ca(2+)-ATPase

In order to identify Ca2+ ligands in the putative transmembrane domain 6 of the plasma membrane Ca2+ pump, amino acids Asn879, Met882, Asp883, and Ser887 were singly altered. Asn879, Met882, and Asp883 were chosen because the corresponding amino acids have been proposed as Ca2+ ligands in the sarcoplasmic reticulum Ca2+ pump (Clarke, D. M., Loo, T. W., and MacLennan, D. H. (1990) J. Biol. Chem. 265, 6262-6267). For the alterations, a fully active truncated version of the pump was used, because the interaction of Ca2+ with the pump could be studied without interference from calmodulin binding. The mutants at Asn and Asp did not carry out ATP-supported Ca2+ uptake and formed no acylphosphate from [gamma-32P]ATP, suggesting that, like the corresponding amino acids in the sarcoplasmic reticulum Ca2+ pump, these two are Ca2+ ligands. However, all the mutants at the position of Met882 showed some activity. Indeed, the Met882--> Ile mutant was fully active at a saturating Ca2+ concentration and only the K1/2 for Ca2+ activation was shifted slightly upward. Converting the Met to Thr (which is the corresponding residue in the sarcoplasmic reticulum Ca2+ pump) reduced the activity to 20% of the wild type, further emphasizing the differences between the two Ca2+ pumps. The mutant Ser887--> Ala was expressed in greater amounts than, and had a specific activity about 50% higher than, the wild type, indicating that this serine also could not be a Ca2+ ligand and could not replace the missing Thr at position Met882.     

An antigenic polysaccharide from Campylobacter coli serotype O:30. Structure of a teichoic acid-like antigenic polysaccharide associated with the lipopolysaccharide

A water-soluble antigenic polysaccharide of high M(r) associated with the lipopolysaccharide has been isolated from phenol-water extraction of cells of Campylobacter coli serotype O:30. The polysaccharide and oligosaccharide degradation products formed on O-dephosphorylation and by periodate oxidation followed by reduction have been investigated by one- and two-dimensional 1H, 13C, and 31P NMR. It is concluded that the antigenic polysaccharide has a teichoic acid-like structure with a poly-Ribitol phosphate, [5-Ribitol-1-P]n, backbone with side chains at O-2 of O-(6-deoxy-beta-D-talo-heptopyranosyl)-(1-->4)-(2-acetylamino-2-deoxy-beta-D- glucopyranosyl) units. The structure is unusual in Gram-negative bacteria and is unique in possessing 6-deoxy-D-talo-heptose as a constituent sugar. Evidence for the relationship of the antigenic polysaccharide to the lipopolysaccharide of low M(r) is discussed.     

Structures stabilizing the dimer interface on human 11 beta-hydroxysteroid dehydrogenase types 1 and 2 and human 15-hydroxyprostaglandin dehydrogenase and their homologs

Human 11 beta-hydroxysteroid dehydrogenase-types 1 and 2 and human 15-hydroxyprostaglandin dehydrogenase belong to a large family of oxidoreductases that includes human dihydropteridine reductase and Streptomyces hydrogenans 20 beta-hydroxysteroid dehydrogenase, for which 3D structures are available. Almost all of these enzymes are either dimers or tetramers. The dimer interface of rat dihydropteridine reductase consists of alpha-helices E and F from each monomer arranged in a four alpha-helix bundle [Varughese et al. (1992) Proc. Natl. Acad. Sci. USA 89, 6080-6084]. Alpha-helix F contains tyrosine-146 and lysine-150, residues that are highly conserved in this protein superfamily and have been proposed to be at the catalytic site. We have examined the dimer interface between alpha-helix F in human and rat dihydropteridine reductase and Streptomyces hydrogenans 20 beta-hydroxysteroid dehydrogenase as well as modeled 3D structures of steroid and prostaglandin dehydrogenases and homologs for stabilizing interactions. We find a site in the middle of alpha-helix F that stabilizes the dimer. This anchor is adjacent to conserved lysine on alpha-helix F. Our analysis suggests that sequence variation in the anchor may be important in substrate specificity.     

Large purely refractive nonlinear index of single crystal P-toluenesulphonate (PTS) at 1600 nm

Z-scan measurements at 1600 nm on single-crystal PTS (p-toluene sulfonate) with single, 65 ps pulses gave a complex nonlinear refractive index coefficient of n₂=2.2(±0.3)×10^-12 cm²/W at 1 GW/cm² and α₂<0.5 cm/GW. This is the first highly nonlinear, organic material to satisfy the conditions imposed by the figures of merit