On the speedup required for combined input- and output-queued switching

Architectures based on a non-blocking fabric, such as a crosspoint switch, are attractive for use in high-speed LAN switches, IP routers, and ATM switches. When operating at the highest speed, memory bandwidth limitations dictate that queues be placed at the input of the switch. But it is well known that input-queueing can lead to low throughput, and does not allow the control of latency through the switch. This is in contrast to output-queueing which maximizes throughput and permits the accurate control of packet latency through scheduling. We ask the question: Can a switch with combined input and output queueing be designed to behave identically to an output-queued switch? In this paper, we prove that if the switch uses virtual output queueing and has an internal speedup of just four, it is possible for it to behave identically to an output-queued switch, regardless of the nature of the arriving traffic. Our proof is based on a novel scheduling algorithm, called Most Urgent Cell First. We find that with a speedup of four the most urgent cell first algorithm (or MUCFA) enables perfect emulation of a FIFO output-queued switch, i.e. one in which packets depart in the same order that they arrived. We extend this result to show that with a small modification, the MUCFA algorithm enables perfect emulation of a variety of output scheduling policies, including strict priorities and weighted fair-queueing. This result makes possible switches that perform as if they were output-queued, yet use memories that run more slowly.     

Improvement of tea leaves fermentation with Aspergillus spp. pectinase

The pectinase enzymes isolated from Aspergillus spp., A. indicus, A. flavus and A. niveus were used for fermentation of tea leaves. The enzymes were purified and characterized. The effect of both crude enzyme preparation and purified pectinase enzymes on the improvement of tea leaf fermentation were determined in terms of theaflavin, thearubigin, high polymerized substances, total liquor colour, dry matter content and total soluble solids of the tea produced. The crude enzyme preparations obtained from ethanol precipitation were found to be more effective in improving tea leaf fermentation than the purified pectinase enzymes.     

Long‐term impact of nitrogen and potassium fertilizers on yield,soil nutrients and biochemical parameters of tea

A field experiment was conducted with tea cultivar UPASI‐9 over a period of 9 years to evaluate the long‐term effects of nitrogen (N) and potassium (K) fertilizers on yield, biochemical parameters, soil and leaf nutrient status. The yield increase was as high as 66% over the control for N application of 450 kg ha^?1 year^?1. Polyphenol and amino acid contents increased with increase in K application rate. Positive and significant correlation was found between nitrate reductase activity and the amino acid content of the tea shoots. While ammoniacal nitrogen in the soil was not affected by the application of fertilizer, ammonium acetate extractable K increased. The failure to apply fertilizer resulted in depletion of the organic matter status of the soil. Although increased rate of nitrogen application increased the overall yield of made tea (kg ha^?1 year^?1), the specific yield (kg kg^?1 N) declined. The soil tended to become acidic from frequent application of high doses of nitrogenous fertilizer. The leaf NK status was significantly influenced by the various treatments. Copyright © 2004 Society of Chemical Industry     

Rapid mixing chemical oxidative polymerization: an easy route to prepare PANI coated small-diameter CNTs/PANI nanofibres composite thin film

Composite thin film containing polyaniline (PANI) coated small diameter carbon nanotubes (SDCNTs)/PANI nanofibres (NFs) has been prepared using an easy in situ rapid mixing chemical oxidative polymerization method. SDCNTs thin film was obtained using thermal chemical vapour deposition method in a separate experiment, whilst PANI NFs are formed in situ during the synthesis of composite. In the composite, PANI coated SDCNTs are uniformly distributed among PANI NFs. The presence of SDCNTs during the composite synthesis does not influence the nucleation and growth of PANI NFs. Raman analysis shows a good interaction between PANI and SDCNTs. Room temperature d.c. electrical sheet resistance of SDCNTs/PANI NFs composite thin film surface is three orders lesser than that of PANI NFs thin film (PANI NFs have the same morphology as in the composite) synthesized using the same method but without the presence of SDCNTs.     

Numerical study of heat and moisture transport through concrete at elevated temperatures

This research article focuses on numerical investigation of heat and moisture transport through concrete exposed to high temperatures such as fire. The conservation equations for moisture and energy transport through concrete have been represented in terms of temperature, pore pressure and vapor content as field variables. As the resulting governing equations are coupled and non-linear, the equations were solved numerically using Galerkin’s weighted residual finite element method and an iterative solution technique. After validating the model, a detailed simulation study has been carried out to understand the role of gradients of temperature, pore pressure and vapor content on heat and moisture transport through concrete exposed to ISO 834 fire curve. Results obtained at the end of 30 minutes exposure of concrete show that the temperature gradients become very steep after 12 minutes of exposure of concrete, which in turn results in increased vapor generation and 93% of vapor generation is completed at the end of 20 minutes. Due to steep temperature gradient along the length of concrete, condensation of vapor takes place which is followed by blockage of pores giving rise to sudden peak pore pressure rise and 97% of peak pore pressure is attained at the end of 18 minutes itself. It is observed that for the initial 18 minutes, the peak pore pressure front and peak vapor content front follow the same path and after 18 minutes the peak vapor content front moves slightly ahead of the peak pore pressure front.     

Numerical assessment of springback for the deep drawing process by level set interpolation using shape manifolds

In this paper, we introduce an original shape representation approach for post-springback characterization based on the automatic generation of parameterized level set functions. The central idea is the concept of the shape manifold representing the design domain in the reduced-order shape-space. Performing Proper Orthogonal Decomposition on the shapes followed by using the Diffuse Approximation allows us to efficiently reduce the problem dimensionality and to interpolate uniquely between admissible input shapes, while also determining the smallest number of parameters needed to characterize the final formed shape. We apply this methodology to the problem of springback assessment for the deep drawing operation of metal sheets.     

Heating value of biodiesel: An empirical and theoretical exploration

The heating value of a fuel affects both the brake thermal efficiency and combustion characteristics of an engine. Its value for fuel blend cannot be calculated based on the blend ratio even though the heating values of blend fuels are known. Therefore, a relationship was formulated from the experimental data to predict the heating values of fuel blends. This study was carried out to compute the theoretical heating values of raw as well as purified pungamia oil with different blend ratio by means of SPSS software (ver. 16). The Durbin–Watson (multiple regressions) tests were carried out in the present study to validate the experimental results. The values of density, flash point, viscosity, and percentage of blends were considered an independent variable, and the heating value was considered a dependent variable for the analysis of heating values of different pungamia oil blends with diesel. The theoretically calculated heating values and relationship between the independent variables were around ± 1%. Also, these values were compared with that of the experimental results of other researchers and the variation was only about 2%. Thus, the validations of developed relation with experimental results show good compliance.     

The chlor-alkali process: Work in Progress

The chlor-alkali process has come a long way from the days of the diaphragm and mercury cell process to the present membrane cell process, with huge reduction in power consumption and hence its carbon footprint. Although there is reduction in the release of highly toxic mercury to the environment, there is increased release of less harmful substances such as chloride and chlorate because the membrane cell is less tolerant to contaminants, and hence requires higher purity brine. The technology providers have continued to improve upon the process to reduce power consumption and to reduce the plant’s footprint. This review looks briefly at the three technologies and attempts to look at where we currently are at. All new chlor-alkali plants being built are of the membrane process. This review mentions some of the areas where improvements can be made to the membrane process.