An Exemplar Imidazoline Surfactant for Corrosion Inhibitor Studies: Synthesis,Characterization, and Physicochemical Properties

An optimized one-pot recipe has been developed to synthesize a surfactant molecule, referred to as OMID, consisting of an imidazoline head group and aliphatic tail, which is an exemplar corrosion inhibitor for carbon steel in acidic solutions. As evidenced by gas chromatography, ¹H and ¹³C nuclear magnetic resonance, and Fourier-transform infrared data, a high-purity product was achieved without the use of either a solvent or catalyst. Critical micelle concentration values and corrosion inhibition efficiencies ( η %) were determined in aqueous solutions of hydrochloric acid and sulfuric acid using surface tensiometry and linear polarization resistance measurements, respectively. Hydrolysis of the imidazoline head group as a function of pH (0–11) was explored with ultraviolet–visible absorption spectroscopy. In addition, N 1s and C 1s X-ray photoelectron spectroscopy data were acquired from both surface-adsorbed OMID and a multilayer of the imidazoline head group of OMID. These latter data are highly relevant to those attempting to understand OMID inhibition chemistry.     

Friction and wear characteristics of organic thiophosphoro derivatives — a critical appraisal

The friction- and wear-reducing characteristics of a number of oil soluble sulphurised and phosphosulphurised derivatives for automotive and industrial applications have been reviewed. A critical appraisal of the suggested causes and mechanism of friction reduction and antiwear characteristics has been made. A review of the investigations carried out so far indicates that the creation of in situ films of simple inorganic salts, such as molybdenum disulphide, iron sulphide or phosphates of low shear strength and lamellar structures, does not appear to be the primary cause of low friction and wear. The authors have, therefore, undertaken a programme to synthesise and study the chemistry and tribochemical reactions in relation to friction and wear characteristics of hydrocarbon-soluble thiophosphoro derivatives of alkyl phenol, alcohols and fatty esters, in order to establish relationships between the reactivity, chemical nature and crystal structure of films formed on rubbing surfaces, and antifriction and antiwear characteristics. Molybdenum salts of various phosphorothio derivatives of pentadecylphenol and lauryl oleate of specific structures have been synthesised, and the friction and wear properties of their blends in mineral oil base stock have been studied. It can be clearly inferred from the results that type of bonding between sulphur, phosphorus and molybdenum, and reactivity of these derivatives with rubbing surfaces, determine their friction-reducing and antiwear characteristics. Their reactivity with iron and the nature of films formed are under investigation.     

A Review on Wear and Friction Performance of Carbon–Carbon Composites at High Temperature

Carbon–carbon (C/C) composite is one of the best ceramic matrix composite due to its high mechanical properties and applications at control environments in various sectors. Carbon–carbon composite is made of woven carbon fibers; carbonaceous polymers and hydrocarbons are used as matrix precursors. These composites generally have densities <2.0 g/cm³ even after densification. C/C composites have good frictional properties and thermal conductivity at high temperature. Also C/C composite can be used as brake pads in high‐speed vehicles. In spite of various applications, C/C composites are very much prone to oxidation at high temperature. Therefore, C/C composites must be protected from oxidation for the use at high temperature.     

Studies on kinetics and preparation of C36 dimer acid esters

C₃₆ Dimer acids were esterified with various short-chain alcohols, namely 2-propanol, n-butanol, n-hexanol, n-octanol, 2-octanol and 2-ethyl-1-hexanol by using sulfuric acid as catalyst and benzene as an azeotropic solvent. Various reaction parameters were standardized. In case of isopropyl esters, acid-to-alcohol mole ratio of 1:5 and sulfuric acid concentration of 2% based on the weight of dimer acids were found to be optimum. In case of straight-chain primary alcohols, namely n-butanol, n-hexanol and n-octanol, 1:2.5 mole ratio of acid to alcohol and 1% by weight of sulfuric acid were found satisfactory. Esterification reaction rates were determined from the fall in acid value of the product. The reaction followed pseudo first order kinetics. The reaction rates increased with the increase in chainlength of straight-chain primary alcohols from n-butanol to n-octanol. The rate of reaction decreased from n-octanol to 2-ethyl-1-hexanol to 2-octanol due to the branching of the chain in 2-ethyl-1-hexanol and secondary nature of the −OH group in 2-octanol.     

Centralized PI controllers for interacting multivariable processes by synthesis method

In this article, two methods of designing a centralized control system for multi-input, multi-output (MIMO) processes are presented. Centralized proportional-integral (PI) controllers are designed based on a direct synthesis method. The inverse of the process transfer function matrix in the direct synthesis method is approximated based on the relative gain array concept. The method is further improved by using a relative normalized gain array, and an equivalent transfer function for each element in the process transfer function matrix is derived for the closed-loop control system. The transpose of the effective transfer function is used to approximate the inverse of the process transfer function matrix. The simulation studies demonstrate the effectiveness of this method. The proposed centralized controllers reduce the interactions better than recently reported decentralized controllers do. A centralized controller designed based on a relative normalized gain array (RNGA) gives a better performance than a centralized controller designed based on a relative gain array (RGA).     

Transport of cobalt(II) through a hollow fiber supported liquid membrane containing di-(2-ethylhexyl) phosphoric acid (D2EHPA) as the carrier

This work presents experimental, modeling and simulation studies for Co²⁺ ion extraction using hollow fiber supported liquid membrane (HFSLM) operated in a recycling mode. Extractant di-(2-ethylhexyl) phosphoric acid (D2EHPA) diluted with kerosene has been used as the membrane phase. The Co²⁺ ion concentration in the aqueous feed phase was varied in the range of 1–3 mM. Also, D2EHPA concentration was varied in the range of 10–30% (v/v). A mass transfer model has been developed considering the complexation and de-complexation reactions to be fast and at equilibrium. Equations for extractant mass balance and counter-ion (H⁺) transport have also been incorporated in the model. Extraction equilibrium constant (K_ex) for cobalt–D2EHPA system has been estimated from equilibration experiments and found to be 3.48 × 10⁻⁶. It was observed that the model results are in good agreement with the experimental data when diffusivity of metal-complex (D_m) through the membrane phase is 1.5 × 10⁻¹⁰ m²/s. Feed phase pH and strip phase acidity had negligible effect on the extraction profiles of Co²⁺ ions. An increase in D2EHPA concentration increased extraction rates of Co²⁺ ions. The membrane phase diffusion step was found to be the controlling resistance to mass transfer.     

Polyaniline / carbon nanotube composites: starting with phenylamino functionalized carbon nanotubes

Summary Composites of carbon a nanotube with polymers are a developing and interesting area of research. The dispersion of the nanotube in polymer matrices is an important factor while making its nanocomposites. Even though in-situ polymerization approach offers a better approach for synthesizing homogeneous polymer nanotube composites, the dispersion of the nanotubes in the monomer solution is a problem. In this article we report a new chemical method for dispersing nanotubes in monomer and the preparation of uniform tubular composite of polyaniline (PANI) and multiwalled carbon nanotube (MWNT). For this the oxidized multiwalled nanotube (o-MWNT) was functionalized with p-phenylenediamine, which gave phenylamine functional groups on the surface. This functionalization helped to disperse the nanotubes in acidic solution. The in-situ polymerization of aniline in the presence of these well dispersed nanotubes gave a new tubular composite of carbon nanotube having an ordered uniform encapsulation of doped polyaniline. The phenylamine functional groups on the surface were grown into polyaniline chain so that the composite contains polyaniline functionalized CNT and they were no more an impurity in the final nanocomposite. The microscopic and structural properties of this composite were compared with that of a composite prepared under identical condition using o-MWNT.     

Multifunctional iron-carbon nanocomposites through an aerosol-based process for the in situ remediation of chlorinated hydrocarbons

Spherical iron-carbon nanocomposites were developed through a facile aerosol-based process with sucrose and iron chloride as starting materials. These composites exhibit multiple functionalities relevant to the in situ remediation of chlorinated hydrocarbons such as trichloroethylene (TCE). The distribution and immobilization of iron nanoparticles on the surface of carbon spheres prevents zerovalent nanoiron aggregation with maintenance of reactivity. The aerosol-based carbon microspheres allow adsorption of TCE, thus removing dissolved TCE rapidly and facilitating reaction by increasing the local concentration of TCE in the vicinity of iron nanoparticles. The strongly adsorptive property of the composites may also prevent release of any toxic chlorinated intermediate products. The composite particles are in the optimal range for transport through groundwater saturated sediments. Furthermore, those iron-carbon composites can be designed at low cost, the process is amenable to scale-up for in situ application, and the materials are intrinsically benign to the environment.     

Effect of superfine grinding on properties of <Emphasis Type="Italic">Vaccinium bracteatum</Emphasis> Thunb leaves powder

Vaccinium bracteatum Thunb, have been widely used in various traditional medicines and food products. The narrow and uniform particle size distribution in V. bracteatum Thunb leaves (VBTL) can be achieved through a new emerging type of foodstuff processing and superfine grinding. The VBTL powders were subjected to four particle sizes as followed: 300–125, 125–75, 75–40, and <40 μm. The VBTL powders were observed to be with smaller size and bulk density, greater surface area, tapped density and the angle of repose. Water solubility index, water holding capacity and total flavonoid extraction increased slightly with the decrease in particle size. Differential scanning calorimetry showed that the VBTL exhibiting particle size of <40 μm had the lowest peak temperature; whereas, powder with a particle size of 125–300 μm displayed the largest endothermic enthalpy. Our results of the properties of VBTL superfine powder supplied the basis for VBTL in potential industrial applications of foods.