Loop‐Mediated Isothermal Amplification (LAMP): A Rapid and Sensitive Tool for Quality Assessment of Meat Products

Loop‐mediated isothermal amplification (LAMP) is a novel method that amplifies target nucleic acids under isothermal conditions. It is a rapid, specific, and sensitive method, which does not require costly thermal cyclers for the detection of nucleic acids. Thus, it is suitable for on‐site detection assays under low‐resource settings. It can also be integrated on compact lab‐on‐a‐chip devices for the development of micro‐total analysis systems. This review discusses LAMP‐based methods, as well as LAMP‐based centrifugal, microfluidic, and other fluid‐handling devices, which have been developed for the assessment of meat quality parameters that are related to the presence or absence of nucleic acids, for example, animal species identification and microbiological quality. Advances in improving the rapidity, specificity, and sensitivity of LAMP techniques for the assessment of these meat quality parameters are also discussed in this review.     

Thermal modeling and performance analysis of industrial-scale metal hydride based hydrogen storage container

In this paper, a performance analysis of a metal hydride based hydrogen storage container with embedded cooling tubes during absorption of hydrogen is presented. A 2-D mathematical model in cylindrical coordinates is developed using the commercial software COMSOL Multiphysics 4.2. Numerical results obtained are found in good agreement with experimental data available in the literature. Different container geometries, depending upon the number and arrangement of cooling tubes inside the hydride bed, are considered to obtain an optimum geometry. For this optimum geometry, the effects of various operating parameters viz. supply pressure, cooling fluid temperature and overall heat transfer coefficient on the hydriding characteristics of MmNi_4.6Al_0.4 are presented. Industrial-scale hydrogen storage container with the capacity of about 150 kg of alloy mass is also modeled. In summary, this paper demonstrates the modeling and the selection of optimum geometry of a metal hydride based hydrogen storage container (MHHSC) based on minimum absorption time and easy manufacturing aspects.     

Linear Fresnel lens concentrators

The use of the linear Fresnel lens as a seasonally adjusted or one-axis tracked solar concentrator is investigated. Ray tracing techniques are used to show that this type of concentrator is very good in the period of time within 1 hr of solar noon. However, increased refraction due to increased incident angles of the solar rays causes a sharp drop-off in energy delivered to the absorber at other hours of the day. Daily collection efficiencies are typically 50 per cent at concentration ratios of near 5. Effects of absorber width, distance from the lens to the absorber and alignment accuracy are considered in detail. Energy collected over a year's time is calculated assuming cloudless skies. Qualitative experimental results are presented that confirm the analytical results.     

Optimisation of steam-based energy transport in distributed solar systems

This paper investigates the methodology for the systematic optimisation of a low-cost transport piping network for distributed solar systems. In order to determine the range of power sizes for which this form of energy transport is economical, equations are developed to yield optimum engineering design parameters for steam-based energy transport in pipelines. A computer software package has been developed which gives the most cost effective layout of optimum networks, size of each pipe/insulation, percentage of the maximum pressure drop to the inlet pressure (% Δp), and percentage of the cost of energy transportation to the energy collected (% cost). Power station sizes of up to 84 MW_e have been studied with collectors of area 300 m² each.     

Performance of plate heat exchangers during calcium sulphate fouling — investigation with an in-line filter

The uncertainty about the fouling behaviour is one of the main reasons why plate and frame heat exchangers are not more widely installed in the chemical process industry and in power generating facilities. In the present investigation, the deposition of calcium sulphate in two different plate heat exchanger geometries was investigated. The deposition process was deliberately focused on crystallisation fouling through the installation of an in-line filter and the mode of preparation of the test solution. The investigated operating parameters were solution concentration, flow velocity, and bulk and surface temperatures. The heat exchangers were opened after each experiment to record the appearance and distribution of the deposits. The key result of this investigation is the strong correlation between the plate design and the tendency for deposit formation.     

Micromechanics of spatially uniform heterogeneous media: A critical review and emerging approaches

Outside of the classical microstructural detail-free estimates of effective moduli, micromechanical analyses of macroscopically uniform heterogeneous media may be grouped into two categories based on different geometric representations of material microstructure. Analysis of periodic materials is based on the repeating unit cell (RUC) concept and the associated periodic boundary conditions. This contrasts with analysis of statistically homogeneous materials based on the representative volume element (RVE) concept and the associated homogeneous boundary conditions. In this paper, using the above classification framework we provide a critical review of the various micromechanical approaches that had evolved along different paths, and outline recent emerging trends. We begin with the basic framework for the solution of micromechanics problems independent of microstructural representation, and then clarify the often confused RVE and RUC concepts. Next, we describe classical models, including the available RVE-based models, and critically examine their limitations. This is followed by discussion of models based on the concept of microstructural periodicity. In the final part, two recent unit cell-based models, which continue to evolve, are outlined. First, a homogenization technique called finite-volume direct averaging micromechanics theory is presented as a viable and easily implemented alternative to the mainstream finite-element based asymptotic homogenization of unit cells. The recent incorporation of parametric mapping into this approach has made it competitive with the finite-element method. Then, the latest work based on locally-exact solutions of unit cell problems is described. In this approach, the interior unit cell problem is solved exactly using the elasticity approach. The exterior problem is tackled with a new variational principle that successfully overcomes the non-separable nature of the overall unit cell problem.     

An intelligent traffic control system using RFID

Vehicular traffic control at road crossings has always been a matter of concern for administrations in many modern cities around the world. Several attempts have been made to design efficient automated systems to solve this problem. Most of the present day systems use predetermined timing circuits to operate traffic signals, which are not very efficient because they do not operate according to the current volume of traffic at the crossing. It is often seen in today's automated traffic control systems that vehicles have to wait at a road crossing even though there is little or no traffic in the other direction. There are other problems as well, such as ambulances getting caught up by a red traffic signal and wasting valuable time. Congestion is often translated into lost time, missed opportunities, lost worker productivity, delivery delay, and a general increased cost.     

Spent fuel reprocessing: A vital link in Indian nuclear power program

The success of the three stage Indian nuclear energy program is inter-linked with the establishment of an efficient closed fuel cycle approach with recycling of both fissile and fertile components of the spent fuel to appropriate reactor systems. The Indian reprocessing journey was started way back in 1964 with the commissioning of a plant based on PUREX technology to reprocess aluminum clad natural uranium spent fuel from the research reactor CIRUS. After achieving the basic skills, a power reactor reprocessing facility was built to reprocess spent fuel from power reactors. Adequate design and operating experience was gained from these two plants for mastering the reprocessing technology. The first plant, being the maiden venture, based on indigenous technology had to undergo many modifications during its operation and finally needed refurbishment for continued operation. Decommissioning and decontamination of this plant was carried out meticulously to allow unrestricted access to the cells for fresh installation. A third plant was built for power reactor spent fuel reprocessing to serve as a design standard for future plants with the involvement of industry. Over the years, spent fuel reprocessing based on PUREX technology has reached a matured status and can be safely deployed to meet the additional reprocessing requirements to cater to the expanding nuclear energy program. Side by side with the developments in the spent natural uranium fuel reprocessing, irradiated thoria reprocessing is also perused to develop THOREX into a robust process. The additional challenges in this domain are being addressed to evolve appropriate technological solutions. Advancements in the field of science and technology are being absorbed to meet the challenges of higher recovery combined with reduced exposure and environmental discharges.