Observation and Analysis of Gypsum Particleboard using SEM

The microstructures of gypsum board and gypsum particleboard were observed by SEM. The effects of retarder and waterproof agent on the shape and the average dimension of the gypsum crystal were discussed. The mechanism was investigated as well. Four typical instances, i e, the gypsum crystal shape, the gypsum combined with particles on the particles surface, the gypsum combined with particles on the wood cross section and the gypsum combined with particles inside the wood cell cavity were selected and observed. Furthermore, the agglomeration and cementation mechanism between gypsum and particle were studied.     

西北江三角洲来水来沙的非线性分形特征

根据西、北江干流高要、石角及西北江三角洲网河区顶点马口、三水四个水文站的流量和含沙量资料 ,应用非线性分形原理的R S方法 ,计算西北江干流及西北江网河区顶点四个水文站的流量、含沙量的赫斯特数H和分形维数D ;探讨西、北江干流来水来沙的分形特征及西北江三角洲的分水分沙规律。结果表明 ,流量的分维数略大于含沙量的分维数 ,三水站流量及含沙量的分维数与其上游的石角站流量、含沙量的分维数相差较大 ,与思贤的分水分沙造成西北江的水沙交换有关     

国外大型调水工程渠道运行控制综述

与常规的以经验为主的运行方式相比，考虑了水动力学影响、以多渠池串联的整个渠道系统为研究对象的渠道运行控制在增加调水工程的安全性、降低运行成本、提高输水效率等方面能取得更佳的效果。国外关于调水工程渠道控制的研究起步较早，基于非线性偏微分圣维南方程组发展了多种离散化、线性化等简化方法，建立了相应的控制模型，并从不同角度确定了其控制方法以及控制算法。参考已有的研究思路和方法，总结国外渠道运行控制的成果，对我国南水北调工程的运行控制有着重要的借鉴意义。     

国内外钻探用金刚石复合片性能的研究

主要介绍国内外金刚石复合片性能及采用四高复合片钻探硬岩的初试,为快速钻探提供一个新的途径.     

土酸溶液中溴化十六烷基吡啶对锌的缓蚀作用及吸附热力学研究

用失重法研究了土酸溶液中溴化十六烷基吡啶对锌的缓蚀作用，发现溴化十六烷基吡啶在锌表面上的吸附是产生缓蚀作用的重要原因，且吸附规律服从Langmuir吸附等温式。用Sekine方法处理实验数据，从而获得了吸附过程△H^0、△S^0和△G^0等一系列重要热力学参数。     

Bandwidth‐guaranteed QoS routing of multiple parallel paths in CDMA/TDMA ad hoc wireless networks

This paper investigates the issues of QoS routing in CDMA/TDMA ad hoc networks. Since the available bandwidth is very limited in ad hoc networks, a QoS request between two nodes will be blocked if there does not exist a path that can meet the QoS requirements, even though there is enough free bandwidth in the whole system. In this paper, we propose a new scheme of using multiple paths between two nodes as the route for a QoS call. The aggregate bandwidth of the multiple paths can meet the bandwidth requirement of the call and the delays of these paths are within the required bound of the call. We also propose three strategies by which to choose a set of paths as the route, namely, shortest path first (SPF), largest bandwidth first (LBF), and largest hop‐bandwidth first (LHBF). Extensive simulations have been conducted to evaluate the performance of the three strategies in comparison with a traditional single path routing algorithm. The simulation results show that the proposed multiple paths routing scheme significantly reduces the system blocking rates in various network environments, especially when the network load is heavy. Copyright © 2005 John Wiley & Sons, Ltd.     

MHD simulation of high-current subsonic vacuum arc under different distributed axial magnetic fields

Based on two-temperature magnetic hydrodynamic (MHD) model, the influence of saddle-shaped distributed axial magnetic field (AMF, linearly increases along radial position) and bell-shaped distributed AMF (linearly decreases along radial position) on plasma loss and heat flux density to anode in subsonic high-current vacuum arc (HCVA) is simulated and analyzed. According to the simulation results, the saddle-shaped AMF can more effectively inhibit plasma loss from arc column than that of bell-shaped AMF. Comparisons between simulation results and experimental results further verify the correctness of model and simulation.     

用高分子复合材料修复轧管机组大型构件

介绍采用高分子复合材料修复用于钢管生产的轧管机组大型构件的方法。重点介绍机架轴承座孔的修复工艺流程 ,修复定位 ,技术操作要点及修复效果。     

自蔓延高温合成TiNi多孔体合金

为了开发新型的生体材料，本文对自蔓延高温合成TiNi多孔体合金——人造骨材料进行了研究。以单质钛粉和镍粉作原料，在氩气保护条件下，采用预热点燃模式和热爆模式制得了不同形态的多孔TiNi形状记忆合金。采用SEM和XRD分析了样品的孔洞特征和相组成，测试了其力学性能，并研究了合成条件参数与样品表面形貌和孔隙状态之间的关系。结果表明，用SHS法制备TiNi多孔体合金是可行的。     

浅议实施差异化战略的措施

随着我国市场的开放，企业面对的竞争日趋激烈，而且企业的竞争优势主要表现为差异化。根据差异化与买方价值的关系，通过技术创新、观念创新实施差异化。