An experimental study on performance and emission characteristics of a methane–hydrogen fuelled gasoline engine

In this paper, the performance and emission characteristics of a conventional twin-cylinder, four stroke, spark-ignited (SI) engine that is running with methane–hydrogen blends have been investigated experimentally. The engine was modified to realize hydrogen port injection by installing hydrogen feeding line in the intake manifolds. The experimental results have been demonstrated that the brake specific fuel consumption (BSFC) increased with the increase of hydrogen fraction in fuel blends at low speeds. On the other hand, as hydrogen percentage in the mixture increased, BSFC values decreased at high speeds. Furthermore, brake thermal efficiencies were found to decrease with the increase in percentage of hydrogen added. In addition, it has been found that CO₂, NO_x and HC emissions decrease with increasing hydrogen. However, CO emissions tended to increase with the addition of hydrogen generally increase. It has been showed that hydrogen is a very good choice as a gasoline engine fuel. The data are also very useful for operational changes needed to optimize the hydrogen fuelled SI engine design.     

Is hepcidin‐25 a predictor of atherosclerosis in hemodialysis patients?

Atherosclerotic cardiovascular disease is an important cause of mortality and morbidity in hemodialysis patients. Iron accumulation in arterial wall macrophages is increased in atherosclerotic lesions. Hepcidin is a key hepatic hormone regulating iron balance. It inhibits iron release from macrophages and iron absorption from enterocytes by binding and inactivating the cellular iron exporter ferroportin. The aim of this study is to investigate the relation of hepcidin‐25, iron parameters, and atherosclerosis measured by carotid intima media thickness (CIMT) in hemodialysis patients. Eighty‐two hemodialysis patients were enrolled in this cross‐sectional study. Predialysis blood samples were centrifuged at 1500 g and 4°C for 10 minutes and stored at ?80°C for the measurement of hepcidin‐25. DRG hepcidin enzyme‐linked immunosorbent assay kit was used for the measurement of hepcidin‐25. Ultrasonographical B‐mode imaging of bilateral carotid arteries was performed with a high‐resolution real‐time ultrasonography (Mindray DC7). Mean age of the study population was 57.90 ± 16.08 years and 43.9% were men. Total study population was grouped into two according to median value of hepcidin‐25. There was no difference between groups with respect to age, dialysis vintage, and C‐reactive protein. CIMT was found to be statistically significantly higher in low hepcidin‐25 group. In correlation analysis, CIMT was found to be correlated with age (P < 0.01, R = 0.33) and hepcidin‐25 (P < 0.01, R = 0.46). In linear regression analysis, age (β = 0.31) and hepcidin‐25 (β = 0.44) were found to be the determinants of CIMT in hemodialysis patients. Our results implicate that hepcidin may take part in pathophysiology of atherosclerosis and cardiovascular disease in hemodialysis patients.     

Changes in the surface of platinum in hot concentrated phosphoric acid at low potentials

Evidence is presented which suggests that, at high temperature and phosphoric acid concentration, reductive adsorption of the acid occurs on Pt in the vicinity of the hydrogen potential. This adsorption, presumably in the form of surface phosphide, does not noticeably inhibit the anodic hydrogen oxidation. It is, however, a source for an anodic peak in the voltammogram for Pt in such acids which has been observed by other workers and which commonly had been attributed to acid-born impurities such as phosphorous acid.     

Effects of insufficient air injection on methanogenic Archaea in landfill bioreactor

In this study, methanogenic Archaea diversity in an aerated landfill bioreactor filled with co-disposed incineration bottom ashes and shredded incombustible wastes was monitored and analyzed as a function of time using molecular techniques. Besides, the effects of insufficient air injection on the bioreactor performance and methanogenic diversity were evaluated thoroughly. Results indicated that rapid bio-stabilization of solid waste are possible with aerated landfill bioreactor at various oxygen and oxidation reduction potential levels. Slot-blot hybridization results of leachate samples collected from aerated landfill bioreactor showed that archaeal and bacterial activities increased as stabilization accelerated and bacterial populations constituted almost 95% of all microorganisms. The results of slot-blot hybridization and phylogenetic analysis based on 16S rRNA gene revealed that Methanobacteriales and Methanomicrobiales were dominant species at the beginning while substituted by Methanosarcina-related methanogens close to the end of the operation of bioreactor.     

Momentum Transfer from Preshape to Grasping

A fully immersed object, suspended in water can be rotated from distance by a preshaped robot hand approaching and closing upon the object prior to contacting it. Momentum transfer from robot fingers closing into a grasp, to the fluid medium particles, and from these particles to the object surface generates the motion tendencies of that object in terms of rotational and translational displacements. In this paper, we propose the novel concept of a controller that determines either: 1) given initial position and orientation of a robot hand, what preshape is suitable for generating a desired momentum distribution on the surface of a given object in order to trigger a desired rotation in a desired direction when approaching with this preshaped hand; or 2) given a predetermined hand preshape, what initial position, orientation and hand aperture are suitable to generate a desired rotation upon approach and, without causing the retroceeding of the object. The desired object motion generated from distance by the approach of a hand preshape is to be used seamlessly for the subsequent manipulation of the object upon grasp. Towards this end, we propose in our work, a new model based on computational fluid dynamics, for determining the continuity in momentum transfer from robot hand fingers to the fluid medium, and to the object, until landing on that immersed object. Our experimental results demonstrate how different hand preshapes initiated from different locations in the medium surrounding an object of different cross sections suspended in equilibrium in the fluid, affects its motion tendencies in terms of rotation and translation. Our further contribution, in this paper, includes the modelling of robot fingers and object as fluidic elements which rigidity can be relaxed to induce compliance.     

Four‐band electromagnetic energy harvesting with a dual‐layer metamaterial structure

A four‐band metamaterial harvester for harvesting 0.9 GHz, 1.8 GHz, 2.6 GHz, and 5.8 GHz signals is proposed by a dual‐layer structure. 0.9 GHz and 1.8 GHz bands are harvested by the resistors in front layer, whereas harvesting of 2.6 GHz is achieved by the resistors in second layer. All resistors in front and back layer contribute to harvesting at 5.8 GHz. Numerical calculations are verified by two different full‐wave electromagnetic solvers based on finite‐integration and finite‐element techniques. Power dissipation ratios at 0.9 GHz, 1.8 GHz, 2.6 GHz and 5.8 GHz frequencies concentrated at the resistors are found as 82.3%, 82.8%, 74.6%, and 83.6%, respectively, by the finite‐integration‐based solver. Besides, the finite‐element method‐based solver results in harvesting efficiencies of 79.6%, 93.4%, 73.7%, and 93.8%. The efficiency of the harvester is investigated for different oblique incidences. The proposed metamaterial harvester can be a good candidate for multi‐band absorption and harvesting applications.     

Pressure control system for electrospinning process

Electrospinning is used to produce micro‐ and nano‐sized synthetic fibers through the use of electrostatic forces. Commercially, viable production of fibers requires high throughput of uniform fibers that are free of defects. To achieve greater control over the process variables that affect the fiber formation, a scalable closed loop control system that can maintain a constant pressure at the capillary tip was designed and tested. Two sensing technologies, infrared and ultrasonic, were used and compared for their ability to detect the height of polymer solution in the electrospinning fluid container. The air pressure above the solution was measured with a pressure transducer and adjusted through a controllable syringe pump. The closed loop electrospinning system was successful at controlling and maintaining a constant pressure at the capillary tip to within 2% of the specified pressure continuously. The controlled pressure at the capillary tip showed a strong correlation to fiber diameter and uniformity for polydimethylsiloxane‐based polyurethane/DMF‐based fibers. However the control system was less effective to control fiber diameter for polyethylene oxide/Water‐based fibers. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers