Nanograin magnetoresistive manganite coatings for EMI shielding against directed energy pulses

Two magnetoresistive manganites, La_0.83Sr_0.17MnO₃ and La_0.7Sr_0.3MnO₃, are synthesized by the environmentally friendly “deposition by aqueous acetate solution (DAAS)” technique. The manganite film has a grain size of 100 nm, and can be processed as thinly as 0.03 μm per layer, while the powder form has a crystallite size of 40 nm. These magnetoresistive materials are shown to be effective and inexpensive electromagnetic interference (EMI) shield for the extremely low frequency (ELF) EM fields. The electrical resistance of manganites is very sensitive to external influences, such as temperature and electromagnetic fields. Both permeability (μ) and conductivity (σ) of manganites tend to increase with increasing applied magnetic field. The manganites have been shown to “react” to field increases in a way that is particularly useful for shielding EMI field fluctuations (e.g., due to current or voltage spikes).

The manganite properties, e.g., crystal structure, film morphology, radiation absorption and reflection, electrical resistivity, and magnetization, etc., have been measured. The ceramic manganites have a metal–insulator transition at 300 K or higher, and are suitable for a room temperature operation. A thin film (approx. 0.1 μm) of La_0.83Sr_0.17MnO₃ was fabricated on a quartz tube or refractory ceramic fiber blanket. Using this thin manganite film, the EMI shielding effectiveness for the measured E-field attenuation is similar to that of a 25 μm thickness of copper tube, aluminum foil, and silver–nickel particle-dispersed paper. The silver–nickel impregnated paper has an EMI shielding effectiveness of 35 dB at 10 kHz, and 15 dB at 60 Hz (or frequency above 1 MHz). The ceramic manganites are chemically inert, thermally stable, and mechanically flexible. They provide low cost EMI shielding against directed energy pulses and may serve as a “signature reduction” barrier.     

Simulated weather variables effects on millet fertilized with phosphate rock in the Sahel

The Sudano–Sahelian agroecological zone is characterized by low and variable rainfall regimes and P deficiency. The present study complements previous research efforts and the objective was (i) to use the Newhall Simulation Model (NSM) to characterize three ICRISAT research sites, and (ii) to use output of NSM to develop an empirical model to guide efficient use of rainfall and fertilizers. The results show that length of the periods that rainfall exceeded evapotranspiration was larger in Bengou than in Gobery and Sadoré. Total positive moisture balance during the three growing seasons was 85.7 mm at Bengou and 19.7 mm at Sadoré. The model explained 52% of the variability in millet yields based on curvilinear response to P fertilizer, standardized May–June (R_mj) rainfall, and the number of wet days in the year (BW₃). Yields appear more sensitive to BW₃ than to R_mj. Their respective elasticity coefficients (E _c ) were 0.62 and 0.09. Assessment of the model using R²=0.76 and the D-index = 0.85 showed reasonable agreement between model estimation and actual field yields. The study demonstrates the application of simulation models as a cost-effective means in terms of time and funds to agronomic research.     

Polyurethane‐infiltrated carbon foams: A coupling of thermal and mechanical properties

The thermal and mechanical properties of polyurethane‐infiltrated carbon foam of various densities were investigated. By combining the high thermal conductivity of the carbon foam with the mechanical toughness of the pure polyurethane, a mechanically tough composite (relative to the unfilled foam) that could be used at higher temperatures than the polyurethane's degradation was formed. Both the tensile strength and the modulus increased by an order of magnitude for the composites compared to unfilled foam, while the compressive and shear strengths and moduli of the composites approached values exhibited by pure polyurethane. At both 300 and 400°C, the rectangular blocks of pure polyurethane lost their mechanical integrity due to decomposition in air. Thermogravimetric analysis confirms substantial initial weight loss above 290°C. Filled carbon foam blocks, however, maintain their mechanical integrity at both 300 and 400°C indefinitely, although the bulk of the rectangular block mass is polyurethane. Three different carbon foam densities are examined. As expected, the higher density foams show greater heat transfer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 2348–2355, 2003     

High Brightness 2.2–12 μm Mid‐Infrared Supercontinuum Generation in a Nontoxic Chalcogenide Step‐Index Fiber

An environment friendly nonlinear chalcogenide glass fiber with a Ge‐Sb‐Se core and a Ge‐Se cladding is fabricated for bright broadband mid‐infrared (MIR) supercontinuum (SC) generation. The fabricated Ge‐Sb‐Se/Ge‐Se fiber with a core diameter of 6 μm shows zero group velocity dispersion at ~4.2 μm and ~7.3 μm. By pumping the fiber with a length of 11 cm at 4.485 μm with 330 fs pulses, we achieve a SC covering the 2.2–12 μm spectral range and with an output average power of ~17 mW. This bright broadband SC source is promising for high‐resolution MIR spectroscopy.     

Asymmetric phase-transfer catalysis utilizing chiral quaternary ammonium salts: asymmetric alkylation of glycine imines

O-Alkyl N-anthracenylmethyl derivatives of Cinchona alkaloids can function as enantioselective phase-transfer catalysts. By employing these catalysts in the asymmetric alkylation of glycine imines, one can generate a range of alpha-amino acid derivatives with high levels of enantiomeric excess. It is also possible to generate the catalysts in situ from commercially available chiral amines, which offers the opportunity to evaluate libraries of related structures. This latter approach has been successfully applied to a series of biphenyl quaternary ammonium salts resulting in the development of a new highly selective catalyst and opening up the potential of further expanding the range of alpha-amino acid derivatives that can be prepared.     

IN-PLANE MOISTURE TRANSPORT IN PAPER DETECTED BY MAGNETIC RESONANCE IMAGING

Magnetic resonance imaging was used to visualize in-plane moisture transport in laboratory-made handsheets, heavy paperboard, and polyethylene-coated paperboard. Beginning with wet samples sealed on both surfaces, the moisture content was reduced through evaporation from the outside edges. The diffusion of moisture to the outside edges, i.e., in the plane of the sheets, was found to be isotropic with respect to the sample machine and cross directions. Isotropic in-plane moisture diffusion was observed for samples exhibiting a relatively high degree of fiber orientation, and under conditions of forced convection with air flow rates up to 10 L/min past the outside edges.     

Changes in the Cuticular Hydrocarbon Profile of the Slave-Maker Ant Queen, Polyergus breviceps Emery, After Killing a Formica Host Queen (Hymenoptera: Formicidae)

Queens of the slave-maker ant, Polyergus breviceps, take over nests of their Formica host species by fatally attacking the resident queen. As workers only begin grooming the P. breviceps queen once she has ceased her attack, we investigated whether a change in parasite queen chemistry may account for the change in worker behavior. Cuticular hydrocarbon profiles of newly mated P. breviceps queens and of queens of their two Formica host species were found to be species-specific. Profiles of newly mated P. breviceps queens that had attacked a Formica queen, however, were virtually identical to the queen profile of the species killed. Mass spectral analysis revealed that the hydrocarbons on the cuticles of newly mated P. breviceps changed from primarily normal alkanes to methyl and di-methyl branched alkanes after attacks. The results suggest that cuticular compounds from the host queen were transferred to the parasite queen during their aggressive interaction.     

An investigation of the effect of air addition during oil sand conditioning

Bitumen aeration was studied by flooding samples of medium grade oil sand with de‐ionized water under both ambient and high vacuum conditions. The samples were then agitated on a shaker table. Subsequent analysis revealed the presence or absence of an air gap in the sample container was the single most important factor in determining the overall bitumen recovery. Furthermore, samples that were flooded while under high vacuum produced slightly less bitumen compared to samples flooded at atmospheric pressure. This suggests that oil sand that is not under high vacuum when flooded with water contains some amount of indigenous air (see introduction) that would aid in bitumen flotation.     

Novel Homozygous Missense Variant in GJA3 Connexin Domain Causing Congenital Nuclear and Cortical Cataracts

Congenital cataracts (CC) are responsible for approximately one-tenth of childhood blindness cases globally. Here, we report an African American family with a recessively inherited form of CC. The proband demonstrated decreased visual acuity and bilateral cataracts, with nuclear and cortical cataracts in the right and left eye, respectively. Exome sequencing revealed a novel homozygous variant (c.563A > G; p.(Asn188Ser)) in GJA3, which was predicted to be pathogenic by structural analysis. Dominantly inherited variants in GJA3 are known to cause numerous types of cataracts in various populations. Our study represents the second case of recessive GJA3 allele, and the first report in African Americans. These results validate GJA3 as a bona fide gene for recessively inherited CC in humans.