Use of locality sensitive hashing (LSH) algorithm to match Web of Science and Scopus

Scientometrics - A novel hashing algorithm is applied to match two prominent and important bibliographic databases at the paper level. In the literature, such tasks have been studied and conducted...     

Solubility of actinide surrogates in nuclear glasses

This paper discusses the results of a study of actinide surrogates in a nuclear borosilicate glass to understand the effect of processing conditions (temperature and oxidizing versus reducing conditions) on the solubility limits of these elements. The incorporation of cerium oxide, hafnium oxide, and neodymium oxide in this borosilicate glass was investigated. Cerium is a possible surrogate for tetravalent and trivalent actinides, hafnium for tetravalent actinides, and neodymium for trivalent actinides. The material homogeneity was studied by optical, scanning electron microscopy. Cerium L_III XANES spectroscopy showed that the Ce³⁺/Ce_total ratio increased from about 0.5 to 0.9 as the processing temperature increased from 1100 to 1400 °C. Cerium L_III XANES spectroscopy also confirmed that the increased Ce solubility in glasses melted under reducing conditions was due to complete reduction of all the cerium in the glass. The most significant results pointed out in the current study are that the solubility limits of the actinide surrogates increases with the processing temperature and that Ce³⁺ is shown to be more soluble than Ce⁴⁺ in this borosilicate glass.     

Influence of composition of MgAl2O4 supported NiCeO2ZrO2 catalysts on coke formation and catalyst stability for dry reforming of methane

Dry reforming of methane was studied over Ni catalysts supported on γAl₂O₃, CeO₂, ZrO₂ and MgAl₂O₄ (670 °C, 1.5 bar, 16–20 l CH₄ ml_catalyst⁻¹ h⁻¹). It is shown that MgAl₂O₄ supported Ni catalysts promoted with both CeO₂ and ZrO₂ are promising catalysts for dry reforming of methane with carbon dioxide. Within a certain composition range, the simultaneous promotion with CeO₂ and ZrO₂ has great influence on the amount of coke and the catalyst service time. XRD analyses indicate that formation of crystalline Ce_xZr_1−xO₂ mixed oxide phases occurs on double promotion. In particular, incorporation of low amounts of Zr in the CeO₂ fluorite structure provides stable dry reforming catalysis. As shown with TPR, promotion leads to a higher reduced state of Ni. SEM, XRD and TPR analyses demonstrate that highly dispersed, doubly promoted Ni catalysts with a strong metal-support interaction are essential for stable dry reforming and suppression of the formation of carbon filaments.     

Asymmetric synthesis and conformational analysis by NMR spectroscopy and MD of Aba- and α-MeAba-containing dermorphin analogues

Dermorphin analogues, containing a (S)‐ and (R)‐4‐amino‐1,2,4,5‐tetrahydro‐2‐benzazepin‐3‐one scaffold (Aba) and the α‐methylated analogues as conformationally constrained phenylalanines, were prepared. Asymmetric phase‐transfer catalysis was unable to provide the (S)‐α‐Me‐o‐cyanophenylalanine precursor for (S)‐α‐MeAba in acceptable enantiomeric purity. However, by using a Schöllkopf chiral auxiliary, this intermediate was obtained in 88 % ee. [(S)‐Aba 3‐Gly 4]dermorphin retained μ‐opioid affinity but displayed an increased δ‐affinity. The corresponding R epimer was considerably less potent. In contrast, the [(R)‐α‐MeAba 3‐Gly 4]dermorphin isomer was more potent than its S epimer. Tar‐MD simulations of both non‐methylated [Aba 3‐Gly 4]dermorphin analogues showed a degree of folding at the C‐terminal residues toward the N terminus of the peptide, without however, adopting a stabilized β‐turn conformation. The α‐methylated analogues, on the other hand, exhibited a type I/I′ β‐turn conformation over the α‐MeAba 3 and Gly 4 residues, which was stabilized by a hydrogen bond involving Tyr 5‐H_N and D ‐Ala 2‐CO.     

Experimental and numerical investigation of a free rising droplet

A toluene droplet rising in a continuous aqueous phase is studied both experimentally and numerically. The experiments have been performed in a small scale, high-speed measuring unit with a high magnification device to image the process in all details. Numerical simulations are performed with the aid of the level set method implemented in the commercial CFD tool COMSOL Multiphysics 3.3a by COMSOL AB. A new technique for quantitative comparison of experimental and numerical results with respect to the droplet shape is presented. Both terminal velocity and droplet shape in experiments and simulations are found to be in excellent agreement. Based on the experimental and numerical data obtained, an improvement of an existing terminal velocity correlation is suggested. The adjusted correlation can be used for the design and optimisation of liquid-liquid extraction units.     

Optimierte Beschreibung von Dispersionsschichten an einem vertikalen Abscheider

The image analysis of dispersion layers in a vertical separator is realized by the development of an evaluation routine. The influence on the dispersion layer of the volume flow and hydrostatic pressure is investigated in continuous and discontinuous settling tests. A direct relationship between volumetric flow / hydrostatic pressure and dispersion layer height can be determined. The observed properties of the dispersion layer are explained by the underlying coalescence and sedimentation processes. The modeling of the dispersion layer is analyzed using four different model approaches.     

Synthesis and properties of YBa2Cu3O7-δ – Y2Ba4CuWO10.8 superconducting composites

YBa₂Cu₃O_7-δ (YBCO) is a well-known high-temperature superconductor. However, its critical current density and thus maximum trapped magnetic field can be improved significantly by introducing the secondary phases (artificial pinning centers). In this contribution, we successfully prepared YBCO single-grain bulks with Y₂Ba₄CuWO_10.8 phase serving as a source of pinning centers. This phase was prepared by solid-state reaction and further refined by milling. In the next step single-grain YBCO bulks with homogeneously distributed Y₂Ba₄CuWO_10.8 were prepared by top-seeded melt growth. Precursors as well as the final product were characterized by XRD, SEM and EDS. The phase composition of YBCO bulks containing Y₂Ba₄CuWO_10.8 was analyzed using Rietveld analysis. Thermal stability of YBCO bulk was studied by STA. Furthermore, PPMS was used to study electrical resistivity and critical current density. Bulk superconducting properties such as levitation force and trapped field ability were also measured.