Lamp configuration design for rapid thermal processing systems

We have studied lamp configuration design for rapid thermal processing (RTP) systems. We considered a configuration consisting of four concentric circular lamp zones, three of them above the wafer and one circumventing the wafer. We propose a method to determine the geometric parameters, the width, height and radius, of the lamp zones so that the configuration designed has the capacity to achieve a uniform temperature on the wafer. The method is based on a necessary and sufficient condition for uniform temperature tracking and analytic expressions of the view factors. A design example is given in which a least square open-loop control law yields good temperature uniformity     

Inhibiting and deactivating effects of water on the selective catalytic reduction of nitric oxide with ammonia over MnOx/Al2O3

The effect of water on the selective catalytic reduction (SCR) of nitric oxide with ammonia over alumina supported with 2–15 wt.-% manganese oxide was investigated in the temperature range 385–600 K, with the emphasis on the low side of this temperature window. Studies on the effect of 1–5 vol.-% water vapour on the SCR reaction rate and selectivity were combined with TPD experiments to reveal the influence of water on the adsorption of the single SCR reactants. It turned out that the activity decrease due to water addition can be divided into a reversible inhibition and an irreversible deactivation. Inhibition is caused by molecular adsorption of water. TPD studies showed that water can adsorb competitively with both ammonia and nitric oxide. Additional kinetic experiments revealed that adsorbed ammonia is present in excess on the catalyst surface, even in the presence of water. Reduced nitric oxide adsorption is responsible for the observed reversible decrease in the reaction rate; the fractional reaction order changes from 0.79 in the absence of water to 1.07 in its presence. Deactivation is probably due to the dissociative adsorption of water, resulting in the formation of additional surface hydroxyls. As the amount of surface hydroxyls formed is limited to a saturation level, the deactivating effect on the catalyst is limited too. The additional hydroxyls condense and desorb in the temperature range 525–775 K, resulting in a lower degree of deactivation at higher temperature. A high temperature treatment at 775 K results in a complete regeneration. The amount of surface hydroxyls formed per unit surface area decreases at increasing MnO_x-loading. The selectivity to the production of nitrogen is enhanced significantly by the presence of gas phase water.     

Prenatal diagnosis of partial monosomy 13q associated with occipital encephalocoele in a fetus

The pre- and postnatal findings of a fetus with a de novo del(13)(pter-->q21:) and an occipital encephalocoele are described. Maternal serum alpha-fetoprotein (AFP) screening at 19 weeks' gestation demonstrated a high level of 2.5 multiples of the median (MOM) and ultrasonography at 27 weeks' gestation showed severe intrauterine growth retardation, cardiomegaly, an occipital encephalocoele, and a calvarial defect. Genetic amniocentesis revealed a karyotype of 46,XX,del(13)(pter-->q21:). The proband postnatally displayed additional abnormalities such as microphthalmia, hypertelorism, large low-set ears, and micrognathia. We discuss the association of central nervous system (CNS) malformations with 13q deletions and emphasize that pregnancies with neural tube defects warrant cytogenetic analysis, especially when additional fetal abnormalities and neonatal dysmorphism are observed.     

Makespan estimation and order acceptance in batch process industries when processing times are uncertain

Batch process industries are characterized by complex precedence relationships between operations, which renders the estimation of an acceptable workload very difficult. A detailed schedule based model can be used for this purpose, but for large problems this may require a prohibitive large amount of computation time. We propose a regression based model to estimate the makespan of a set of jobs. We extend earlier work based on deterministic processing times by considering Erlang-distributed processing times in our model. This regression-based model is used to support customer order acceptance. Three order acceptance policies are compared by means of simulation experiments: a scheduling policy, a workload policy and a regression policy. The results indicate that the performance of the regression policy can compete with the performance of the scheduling policy in situations with high variety in the job mix and high uncertainty in the processing times. Correspondence to: C.V. Ivanescu     

Das Blockieren einer Internet-Seite als strafbare Nötigung

Zusammenfassung  Aus der Sicht eines informationstechnischen Laien scheinen Denial of Service-Angriffe mit Online-Demonstrationen in keinem Zusammenhang zu stehen. Das Gegenteil ist der Fall, wenn durch derartige Angriffe der Anbieter einer Webseite buchst?blich lahm gelegt wird. Ob die an sich lautere Intention einer kritischen Meinungs?u?erung derartige Angriffe rechtfertigen kann, ist fraglich und besch?ftigt die Justiz. Der Verfasser dieses Beitrages bewertet den Sachverhalt eines Denial-of-Service-Angriffes strafrechtlich. Dr. jur. Jan Eichelberger, LL.M.oec. Rechtsreferendar am Kammergericht Interessenschwerpunkte im Gewerblichen Rechtsschutz, im Kapitalmarktrecht und im Recht der neuen Medien     

Temperature effects on the mass flow rate in the SBI and similar heat‐release rate test equipment

In various medium‐to‐large‐scale fire test equipments like the ISO room corner test (RC), and more recently, the single burning item test (SBI) the mass flow rate measurement of the combustion gases plays a key role in the determination of the heat‐release rate and smoke‐production rate. With the knowledge of the velocity profile and the temperature of the flow, the mass flow rate is obtained by measuring the velocity on the axis of the duct. This is done by means of a bi‐directional probe based on the pitot principle. However, due to the variation of the mean temperature and the temperature gradient in any cross section of the duct, introduced by ever changing combustion gas temperatures, the velocity nor the density profile are constant in time. This paper examines the resulting uncertainty on the mass flow rate. Copyright © 2006 John Wiley & Sons, Ltd.     

A unified approach to superresolution and multichannel blind deconvolution.

This paper presents a new approach to the blind deconvolution and superresolution problem of multiple degraded low-resolution frames of the original scene. We do not assume any prior information about the shape of degradation blurs. The proposed approach consists of building a regularized energy function and minimizing it with respect to the original image and blurs, where regularization is carried out in both the image and blur domains. The image regularization based on variational principles maintains stable performance under severe noise corruption. The blur regularization guarantees consistency of the solution by exploiting differences among the acquired low-resolution images. Several experiments on synthetic and real data illustrate the robustness and utilization of the proposed technique in real applications.     

Detection of failure sites by focused ion beam and nano-probing in the interconnect of three-dimensional stacked circuit structures

Focused ion beam (FIB) and nano-probing were applied for failure analysis of three-dimensional stacked circuits with copper through-silicon-vias between the stacked chips. The failure analysis was done after high temperature storage and thermal cycling tests. Passive voltage contrast in FIB allowed to pinpoint the open sites. FIB cross-sections showed the presence of opens at the bottom of the copper vias. The failure cause was suspected to be an interlayer particle, which was confirmed by optical profilometry. Nano-probing was used on another sample to pinpoint the failure location through the measurement of the local resistance within the daisy chains. The failure was traced out to be related with surface contamination.     

Response Selection in Visual Search: The Influence of Response Compatibility of Nontargets.

The authors used visual search tasks in which components of the classic flanker task (B. A. Eriksen & C. W. Eriksen, 1974) were introduced. In several experiments the authors obtained evidence of parallel search for a target among distractor elements. Therefore, 2-stage models of visual search predict no effect of the identity of those distractors. However, clear compatibility effects of the distractors were obtained: Responses were faster when the distractors were compatible with the response than when they were incompatible. These results show that even in parallel search tasks identity information is extracted from the distractors. In addition, alternative interpretations of the results in terms of the occasional identification of a distractor before or after the target was identified could be ruled out. The results showed that flat search slopes obtained in visual search experiments provide no benchmark for preattentive processing. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Innovation Leaders Should be Controlled Schizophrenics

Innovating is a multi‐faceted process. In this paper, four different, yet intertwined aspects of this process are distinguished. The first aspect concerns the content of the innovation; a new product, a new technology or a new market. The second aspect concerns the group dynamics of the innovation team. The third aspect concerns seeing the innovation process as a creative process. And the fourth aspect has to do with leadership. Since these four aspects are simultaneously working together during the innovation process, the leaders of this process are working in a very difficult situation, as all four aspects need to be dealt with in different ways. Nearly all of them are, in one way or another, in conflict with one another. They may conflict in real actions, in time horizons (past, present or future) or in effect (positive reactions during market introduction do not garantee ultimate market success). This means that innovation leaders need to show a special kind of leadership. This leadership must be balanced, people‐focused and must include a high tolerance for ambiguity and paradoxes. They have to be nice and nasty at the same time. In short: innovation leaders should be some kind of controlled schizophrenics.