Synthesis and properties of YBa2Cu3O7-δ – Y2Ba4CuWO10.8 superconducting composites

YBa₂Cu₃O_7-δ (YBCO) is a well-known high-temperature superconductor. However, its critical current density and thus maximum trapped magnetic field can be improved significantly by introducing the secondary phases (artificial pinning centers). In this contribution, we successfully prepared YBCO single-grain bulks with Y₂Ba₄CuWO_10.8 phase serving as a source of pinning centers. This phase was prepared by solid-state reaction and further refined by milling. In the next step single-grain YBCO bulks with homogeneously distributed Y₂Ba₄CuWO_10.8 were prepared by top-seeded melt growth. Precursors as well as the final product were characterized by XRD, SEM and EDS. The phase composition of YBCO bulks containing Y₂Ba₄CuWO_10.8 was analyzed using Rietveld analysis. Thermal stability of YBCO bulk was studied by STA. Furthermore, PPMS was used to study electrical resistivity and critical current density. Bulk superconducting properties such as levitation force and trapped field ability were also measured.     

Passage of a bubble through the interface between a shear-thinning heavier liquid and a Newtonian lighter liquid

Abstract

Numerical simulations are carried out to study the phenomenon of passage of a bubble through the interface between two initially quiescent liquids. The heavier liquid is a viscous shear-thinning liquid whereas the lighter liquid is a viscous Newtonian liquid. The computational model, which is based on axisymmetric computational domain and VOF (volume of fluid) method, is validated by using the data reported in literature. The validated computational model is then used to perform parametric analysis to understand the effects of bubble diameter, interfacial tension between the two liquids and flow index of the heavier liquid on the drainage time, drainage height, retention time and retention height of the bubble at the liquid–liquid interface. Finally, correlations for retention time and retention height are proposed.     

Chemically Synthesized 58‐mer LysM Domain Binds Lipochitin Oligosaccharide

Recognition of carbohydrates by proteins is a ubiquitous biochemical process. In legume–rhizobium symbiosis, lipochitin oligosaccharides, also referred to as nodulation (nod) factors, function as primary rhizobial signal molecules to trigger root nodule development. Perception of these signal molecules is receptor mediated, and nod factor receptor 5 (NFR5) from the model legume Lotus japonicus is predicted to contain three LysM domain binding sites. Here we studied the interactions between nod factor and each of the three NFR5 LysM domains, which were chemically synthesized. LysM domain variants (up to 58 amino acids) designed to optimize solubility were chemically assembled by solid‐phase peptide synthesis (SPPS) with microwave heating. Their interaction with nod factors and chitin oligosaccharides was studied by isothermal titration calorimetry and circular dichroism (CD) spectroscopy. LysM2 showed a change in folding upon nod factor binding, thus providing direct evidence that the LysM domain of NFR5 recognizes lipochitin oligosaccharides. These results clearly show that the L. japonicus LysM2 domain binds to the nod factor from Mesorhizobium loti, thereby causing a conformational change in the LysM2 domain. The preferential affinity for nod factors over chitin oligosaccharides was demonstrated by a newly developed glycan microarray. Besides the biological implications, our approach shows that carbohydrate binding to a small protein domain can be detected by CD spectroscopy.     

Effect of Oxime Ether Incorporation in Acyl Indole Derivatives on PPAR Subtype Selectivity

Compounds that simultaneously activate peroxisome proliferator‐activated receptor (PPAR) subtypes α and γ have the potential to effectively treat dyslipidemia and type 2 diabetes (T2D) in a single pharmaceutically active molecule. The frequently observed side effects of selective PPARγ agonists, such as edema and weight gain, were expected to be overcome by using additive PPARα activity, leading to dual PPARα/γ agonists with balanced activity for both subtypes. Herein we report the discovery, synthesis, and optimization of a new series of α‐ethoxyphenylpropionic acid bearing 5‐ or 6‐substituted indoles. The incorporation of oxime ethers on the carbonyl portion of the benzoyl group can bring the PPARα/γ potency ratio equal to or slightly greater than one, as is the case for compounds 20 c and 21 a . Compound 20 c shows high efficacy in an ob/ob mouse model of T2D and dyslipidemia, similar to that of rosiglitazone and tesaglitazar, but with a significant increase in body weight gain. In contrast, compound 21 a , less potent as a dual PPARα/γ activator than 20 c , showed an interesting pharmacological profile, as it elicits a decrease in body weight relative to reference compounds.     

Fully renewable limonene‐derived polycarbonate as a high‐performance alkyd resin

Limonene‐derived polycarbonate‐based alkyd resins (ARs) have been prepared by copolymerization of limonene dioxide with CO₂, catalysed by a β‐diiminate zinc–bis(trimethylsilyl)amido complex, and subsequent chemical modification with soybean oil fatty acids using triphenylethylphosphonium bromide as the catalyst. This quantitative partial modification was realized via epoxy–carboxylic acid chemistry, affording ARs with higher oil lengths, lower polydispersities and higher glass transition temperatures (T_g) in comparison to a conventional polyester AR based on phthalic acid, multifunctional polyol pentaerythritol and soybean fatty acid. The novel limonene polycarbonate AR and the conventional polyester AR were evaluated as coatings and both the physical drying (without the presence of the oxidative drying accelerator Borchi® Oxy Coat) and chemical curing (with Borchi® Oxy Coat) processes of these coatings were monitored by measuring the König hardness and complex modulus development with time. A better performance was obtained for the alkyd paint containing polycarbonates modified with fatty acids (FA‐PCs), which showed a faster chemical drying, a higher König hardness and a higher T_g in coating evaluation, demonstrating that the fully renewable FA‐PCs are promising resins for alkyd paint applications. © 2019 Society of Chemical Industry     

Centrifugal Pumps as Extractors

The generation of dispersions with defined droplet size distributions is important for liquid-liquid extraction. In this respect, the capability of a centrifugal pump to generate dispersions was investigated for different operating points. For the analysis of the mixing process, a centrifugal pump was designed translucent. High-speed images reveal the mechanism of particle breakup. Optical measurement technology and image processing with neural networks were used to determine droplet size distributions. The influence of flow rate, rotational frequency and holdup are discussed for a paraffin oil-water system.     

Digital Extraction Column: Measurement and Modeling Techniques

The digitization of extraction columns requires a profound knowledge of the present hydrodynamics/mass transport interaction as well as appropriate measurement techniques for the detection of relevant input and target values. In this article, the different techniques for droplet size distribution as well as concentration determination are presented and new methods for online evaluation are discussed. In combination with the simulation of droplet size, holdup and solute concentration distribution, an online-capable process tool for controlling and optimizing extraction columns will be obtained.     

Local analysis of Marangoni effects during and after droplet formation

The influence on the mass transfer in liquid-liquid extraction was investigated during droplet formation in a quiescent aqueous continuous phase for the two transition components, acetone and acetonitrile, in toluene. Both transition components have similar characteristics. However, an approximately eight times slower mass transfer of a droplet hanging on a capillary in relation to a rising droplet could be observed. The droplet formation time and the initial solute concentration are decisive for the mass transfer behaviour. A lower volumetric flow leads to slower droplet formation and a higher specific mass transfer area enhancing mass transfer, which is visualized via laser induced fluorescence (LIF). Additionally, as expected, higher initial solute concentrations promote Marangoni turbulences and thus mass transfer, which is measured via confocal Raman spectroscopy inside a fixed hanging droplet.     

Distillation vs. membrane filtration: overview of process evolutions in seawater desalination

The worldwide need for fresh water requires more and more plants for the treatment of non-conventional water sources. During the last decades, seawater has become an important source of fresh water in many arid regions. The traditional desalination processes [reverse osmosis (RO), multi stage flash (MSF), multi effect distillation (MED), electrodialysis (ED)] have evoluated to reliable and established processes; current research focuses on process improvements in view of a lower cost and a more environmentally friendly operation. This paper provides an overview of recent process improvements in seawater desalination using RO, MSF, MED and ED. Important topics that are discussed include the use of alternative energy sources (wind energy, solar energy, nuclear energy) for RO or distillation processes, and the impact of the different desalination process on the environment; the implementation of hybrid processes in seawater desalination; pretreatment of desalination plants by pressure driven membrane processes (microfiltration, ultrafiltration and nanofiltration) compared to chemical pretreatment; new materials to prevent corrosion in distillation processes; and the prevention of fouling in reverse osmosis units. These improvements contribute to the cost effectiveness of the desalination process, and ensure a sustainable production of drinking water on long terms in regions with limited reserves of fresh water.