Influence of FeO/SiO2 and CaO/SiO2 Ratios in Iron‐Saturated ZnO‐Rich Fayalite Slags on the Corrosion of MgO

The corrosion behavior of MgO in iron‐saturated ZnO‐rich fayalite (ZFS) slags having various FeO/SiO₂ ratio and CaO/SiO₂ ratio was investigated using MgO crucible tests for 12 h at 1200°C. The FeO/SiO₂ and CaO/SiO₂ ratios in the ZFS slags were varied from 1.0 to 2.2, and from 0.04 to 0.32, respectively. In all of the tests, it was observed that MgO dissolves into ZFS slags and that (Zn,Fe,Mg)₂SiO₄ olivine and (Zn,Fe,Mg)O solid solution are formed at the crucible/slag interface. The MgO dissolution decreased with the FeO/SiO₂ ratio up to a value of 1.7 and then slightly increased, whereas it continuously increased with the CaO/SiO₂ ratio. There is no obvious relationship between the amount of olivine and the FeO/SiO₂ ratio or CaO/SiO₂ ratio. In comparison, the formation of (Zn,Fe,Mg)O solid solution is enhanced by increasing the FeO/SiO₂ ratio or CaO/SiO₂ ratio in ZFS slags. The results suggest that MgO corrosion is the lowest for FeO/SiO₂ and CaO/SiO₂ ratios around 1.7 and 0, respectively.     

Multi-level Modeling of Silica–Template Interactions During Initial Stages of Zeolite Synthesis

Zeolite synthesis is driven by structure-directing agents, such as tetrapropyl ammonium ions (TPA⁺) for Silicalite-1 and ZSM-5. However, the guiding role of these organic templates in the complex assembly to highly ordered frameworks remains unclear, limiting the prospects for advanced material synthesis. In this work, both static ab initio and dynamic classical modeling techniques are employed to provide insight into the interactions between TPA⁺ and Silicalite-1 precursors. We find that as soon as the typical straight 10-ring channel of Silicalite-1 or ZSM-5 is formed from smaller oligomers, the TPA⁺ template is partially squeezed out of the resulting cavity. Partial retention of the template in the cavity is, however, indispensable to prevent collapse of the channel and subsequent hydrolysis.

Optimised plasma stabilisation at TEXTOR with an advanced, real-time digital control scheme

The tokamak TEXTOR at the Research Centre in Jülich is in operation since more than 25 years. The various control systems at the start, in 1982, were based on analogue techniques, a standard at the time, and were later partly replaced by specially developed digital systems. These systems proved their robustness over the years. As a replacement for the old system, off-the-shelf products were used to ensure continuity, reliability and to reduce the development cost. To provide advanced control scenarios, the new system allows the implementation of more sophisticated algorithms for magnetic and kinetic control. The LabVIEW Real-Time (RT) modules and real-time hardware from National Instruments satisfy these requirements to a large extent. The new system has already been successfully commissioned at TEXTOR and is used to calculate in real-time the plasma density profile (10 ms), the Shafranov shift (10 ms), the plasma vertical and horizontal position (20 $\mu$s) and to control the plasma shape (1 ms). TEXTOR has circular plasmas and has an iron core. Its central part is operated in saturation. During the saturation phase, stray fields change the plasma shape from nearly circular to slightly triangular. By using a shape-control coil set, we can control and adjust the plasma form. The new real-time system is presented as well as the implemented control applications.     

Heat-induced aggregation of whey proteins in the presence of κ-casein or sodium caseinate

Aggregates were formed by heating mixtures of whey protein isolate (WPI) and pure κ-casein or sodium caseinate at pH 7 and 0.1 M NaCl. The aggregates were characterized by static and dynamic light scattering and size exclusion chromatography. After extensive heat-treatment at 80 °C for 24 h, almost all whey proteins and κ-casein formed mixed aggregates, but a large proportion of the sodium caseinate did not aggregate. At a given WPI concentration the size of the aggregates decreased with increasing κ-casein or sodium caseinate concentration, but the overall self-similar structure of the aggregates was the same. The presence of κ-casein or caseinate therefore inhibited growth of the heat-induced whey protein aggregates. The results were discussed relative to the reported chaperone-like activity of casein molecules towards heat aggregation of globular proteins.     

Artistic edge and corner enhancing smoothing.

Two important visual properties of paintings and painting-like images are the absence of texture details and the increased sharpness of edges as compared to photographic images. Painting-like artistic effects can be achieved from photographic images by filters that smooth out texture details, while preserving or enhancing edges and corners. However, not all edge preserving smoothers are suitable for this purpose. We present a simple nonlinear local operator that generalizes both the well known Kuwahara filter and the more general class of filters known in the literature as "criterion and value filter structure." This class of operators suffers from intrinsic theoretical limitations which give rise to a dramatic instability in presence of noise, especially on shadowed areas. Such limitations are discussed in the paper and overcome by the proposed operator. A large variety of experimental results shows that the output of the proposed operator is visually similar to a painting. Comparisons with existing techniques on a large set of natural images highlight conditions on which traditional edge preserving smoothers fail, whereas our approach produces good results. In particular, unlike many other well established approaches, the proposed operator is robust to degradations of the input image such as blurring and noise contamination.     

The Effect of Ketone Defects on the Charge Transport and Charge Recombination in Polyfluorenes

The effect of on‐chain ketone defects on the charge transport of the polyfluorene derivative poly(9,9‐dioctylfluorene) (PFO) is investigated. Using MoO₃ as ohmic hole contact, the hole transport in a pristine PFO diode is observed to be limited by space‐charge, whereas fluorenone contaminated PFO (PFO‐F) is shown to be trap limited by the occurrence of an exponential trap distribution with a trap depth of 0.18 eV. The electron transport in PFO is also observed to be trap limited, but in order to describe the electron transport of PFO‐F, an additional trap level with a depth of 0.46 eV must be introduced. The obtained energy levels of the fluorenone trapping sites are in close agreement with cyclic voltammetry (CV) measurements reported in literature. As a result, the fluorenone defects are shown to simultaneously act as hole‐ and electron trap. Moreover, through ideality factor measurements, the green emission associated with these defects is observed to originate from trap‐assisted recombination.     

Hydroprocesssing of light gas oil — rape oil mixtures

Two series of experiments of hydroprocessing of light gas oil - rape oil mixtures were carried out. The reactor feed was composed of raw material: first series — 10 wt.% rape oil and 90 wt.% of diesel oil; second series — 20 wt.% rape oil and 80 wt.% of diesel oil.     

Sequential enzymatic quantification of two sugars in a single microchannel

This paper presents the implementation of a multiple analyte enzyme assay, based on the sequential injection of the different enzyme solutions, in an electrokinetic driven microfluidic chip. The assay methodology for the simultaneous quantification of d-glucose and d-fructose was reported in previous publications but here the real integration of both enzyme assays was achieved. When assays were executed separately, good reproducibility was observed with average CV values of 5.2% and 4.5% for the d-glucose and d-fructose assay, respectively. Next, the assays for the quantification of d-glucose and d-fructose were integrated simultaneously on chip, where each assay was executed consecutively in the same microreactor by applying a specific sequence of potentials at the reservoirs. This article proves the integration of a sequential based quantification approach in continuous microfluidic chips with electrokinetic actuation.