Microstructure of the HMX‐Based PBX KS32 after Mechanical Loading

Non‐destructive X‐ray diffraction techniques were applied in order to monitor the influence of mechanical and shock‐loading on the microstructure of the plastic‐bonded high explosive KS32. The investigations uncovered damage to embedded coarse HMX crystals and to the binder system HTPB‐IPDI. Damage to the crystals occurred already during the kneading process in terms of deformation twinning. On higher loading between 400 MPa (static) and 480 MPa (dynamic) also crystal fracture was observed. The change in the binder structure was found after both static and dynamic loading, but not in the cured, differently kneaded samples. Moreover, the change in binder structure after dynamic loading was verified by dynamic mechanical analysis, and interpreted as a partial damage of the binder rubber shell around the explosive particles. The results are compared to literature data from imaging techniques.     

社区GIS数据模型的设计与应用研究

城市社区的发展需要社区GIS提供强有力的服务工具,运用关系数据库的理论并结合郑州市社区GIS的开发,探讨了社区GIS数据的分类和数据组织,按照关系数据库设计的方法,建立了社区GIS数据模型.郑州市社区GIS的成功运行,表明采用这种方法设计社区GIS数据模型的方法是行之有效的.     

Simplified Moment Redistribution of Hybrid HPS 485W Bridge Girders in Negative Bending

Simplified moment redistribution procedures based on shakedown have recently been approved by AASHTO LRFD Bridge Design Specifications (AASHTO 2004). These procedures are currently only applicable for homogeneous girders, and thus, the objective of this study is to evaluate whether these procedures can be further applied for hybrid HPS 485W girders. A parametric study is carried out using validated three-dimensional finite-element (FE) analyses to study the inelastic behavior of hybrid HPS 485W girders in negative bending for this purpose. The effective plastic moments obtained from the FE studies are compared with those from the proposed prediction equations, where good correlation is observed. A design example of a three-span slab-on-girder bridge with hybrid HPS 485W girders using both elastic design and the simplified moment redistribution procedures is also presented, where it is shown that the use of moment redistribution procedures results in a negative bending section that is 13% lighter than the corresponding elastic design.     

The effects of multifocal refractive lenses on occipital extension and forward head posture during a visual task

The purpose of this study was to determine if a change in forward head posture and occipital extension occurred in participants who wore multifocal lenses vs. those persons with non-multifocal lenses while performing an 8-min visual reading task on a visual display unit (VDU). Forty-two healthy human participants were recruited for this study. Thirty-three participants completed the study. Fourteen participants wore multifocal lenses and 19 wore frames with non-multifocal lenses. To evaluate the degree of change of forward head posture and occipital extension digital photographs of cervical posture were taken at four different time intervals: prior to performing the reading task and at 3, 5 and 8 min during the reading task. The digital photographs were analysed utilizing a computer program. Two one-way ANOVA were utilized to determine the degree of change of forward head posture and occipital extension between groups. A significant difference was identified between groups for changes in degrees of forward head posture while performing a visual reading task on a VDU. However, no significant difference between groups was found for occipital extension while performing the same task. Multifocal wearers exhibit greater degrees of change in forward head posture and occipital extension than non-multifocal wearers. These postural changes may place them at a greater risk for musculoskeletal disorders and headaches.     

Virtual rheoscopic fluids for flow visualization

Physics-based flow visualization techniques seek to mimic laboratory flow visualization methods with virtual analogues. In this work we describe the rendering of a virtual rheoscopic fluid to produce images with results strikingly similar to laboratory experiments with real-world rheoscopic fluids using products such as Kalliroscope. These fluid additives consist of microscopic, anisotropic particles which, when suspended in the flow, align with both the flow velocity and the local shear to produce high-quality depictions of complex flow structures. Our virtual rheoscopic fluid is produced by defining a closed-form formula for the orientation of shear layers in the flow and using this orientation to volume render the flow as a material with anisotropic reflectance and transparency. Examples are presented for natural convection, thermocapillary convection, and Taylor-Couette flow simulations. The latter agree well with photographs of experimental results of Taylor-Couette flows from the literature.     

Certainty equivalence adaptation combined with super-twisting sliding-mode control

ABSTRACT

In this paper, a Lyapunov-based control concept is presented that combines variable structure and adaptive control. The considered system class consists of nonlinear single input systems which are affected by matched structured and unstructured uncertainties. Resorting to the certainty equivalence principle, the controller exploits advantages of both the sliding-mode and the adaptive control methodology. It is demonstrated that the gains of the discontinuous control action may be reduced remarkably when compared with pure sliding-mode-based approaches. The efficiency of the presented concept is demonstrated in detail, using results of numerical simulations.     

A MIMD implementation of a parallel Euler solver for unstructured grids

A mesh-vertex finite volume scheme for solving the Euler equations on triangular unstructured meshes is implemented on a MIMD (multiple instruction/multiple data stream) parallel computer. Three partitioning strategies for distributing the work load onto the processors are discussed. Issues pertaining to the communication costs are also addressed. We find that the spectral bisection strategy yields the best performance. The performance of this unstructured computation on the Intel iPSC/860 compares very favorably with that on a one-processor CRAY Y-MP/1 and an earlier implementation on the Connection Machine.The authors are employees of Computer Sciences Corporation. This work was funded under contract NAS 2-12961     

Routing Permutations on Graphs via Factors

We deal with the permutation routing problem on graphs modeling interconnection networks. In our model, calledrouting via factors, at each routing step, the communication pattern is a directed 1-factor in a symmetric digraph. This adds a new feature, that of continuous packet movement, to preciously studied routing types, where the routing of a permutation is reduced to a sequence of permutations from a given class. We especially focus on bipartite graphs and we give sufficient conditions for a graph to be rearrangeable in our model. We propose a general technic for routing via factors that we apply to the 2D mesh and the hypercube.     

Fabrication and in situ characterization of microcapsules in a microfluidic system

We have designed a microfluidic system that enables both the fabrication of calibrated capsules and the in situ characterization of their mechanical properties. The fabrication setup consists of a double flow-focusing system. A human serum albumin aqueous solution is introduced in the central channel of a first Y-junction. Intercepted by the lateral flows of a hydrophobic phase, it is dispersed into microdroplets. A cross-linking agent is then introduced at a second Y-junction allowing a membrane to form around the droplets. The time of cross-linking is controlled by the length of a wavy channel located downstream of the second junction. A cylindrical microchannel finally enables to deform and characterize the capsules thus formed. The mechanical properties of the capsule membrane are obtained by inverse analysis. The results show that the drop size increases with the flow rate ratio between the central and lateral channels. The mean shear modulus of the capsules fabricated after 23 s of cross-linking is of the order of the surface tension between the two phases indicating that a reaction time of 23 s is too short for an elastic membrane to form around the droplet. When the cross-linking time is increased to 60 s, the microcapsules surface is wrinkled, thus confirming that a solid membrane is formed around the drop. The mean shear modulus of the capsule membrane increases with the cross-linking time, which is in agreement with our previous chemical results and proves that a fine control of the mechanical properties is possible by choosing adequately the control parameters of the system.     

A geometric approach to remote eye tracking

This paper presents a principled analysis of various combinations of image features to determine their suitability for remote eye tracking. It begins by reviewing the basic theory underlying the connection between eye image and gaze direction. Then a set of approaches is proposed based on different combinations of well-known features and their behaviour is evaluated, taking into account various additional criteria such as free head movement, and minimum hardware and calibration requirements. The paper proposes a final method based on multiple glints and the pupil centre; the method is evaluated experimentally. Future trends in eye tracking technology are also discussed.