A Point‐wise Approach to the Analysis of Complex Composite Structures Using Digital Image Correlation and Thermoelastic Stress Analysis

Thermoelastic stress analysis (TSA) and digital image correlation (DIC) are used to examine the stress and strain distributions around the geometric discontinuity in a composite double butt strap joint. A well‐known major limitation in conducting analysis using TSA is that it provides a metric that is only related to the sum of the principal stresses and cannot provide the component stresses/strains. The stress metric is related to the thermoelastic response by a combination of material properties known as the thermoelastic constant (coefficient of thermal expansion divided by density and specific heat). The thermoelastic constant is usually obtained by a calibration process. For calibration purposes when using orthotropic materials, it is necessary to obtain the thermoelastic constant in the principal material directions, as the principal stress directions for a general structure are unknown. Often, it is assumed that the principal stress directions are coincident with the principal material directions. Clearly, this assumption is not valid in complex stress systems, and therefore, a means of obtaining the thermoelastic constants in the principal stress directions is required. Such a region is that in the neighbourhood of the discontinuities in a bonded lap joint. A methodology is presented that employs a point‐wise manipulation of the thermoelastic constants from the material directions to the principal stress directions using full‐field DIC strain data obtained from the neighbourhood of the discontinuity. A comparison of stress metrics generated from the TSA and DIC data is conducted to provide an independent experimental validation of the two‐dimensional DIC analysis. The accuracy of a two‐dimensional plane strain finite element model representing the joint is assessed against the two experimental data sets. Excellent agreement is found between the experimental and numerical results in the adhesive layer; the adhesive is the only component of the joint where the material properties were not obtained experimentally. The reason for the discrepancy is discussed in the paper.     

Social Housing Versus Housing Allowances: Choosing Between Two Forms of Housing Subsidy at the Local Level

Analysis of the policy choice between social housing and housing allowances has been obscured by the older housing policy debate between proponents of supply subsidies and proponents of demand subsidies. Social housing uses capital grants both to reduce monthly housing costs to below-market rates and to take existing or newly constructed housing out of the market, so that ownership is nonprofit and use is allocated according to need rather than ability to pay. Housing allowances, on the other hand, enable poor tenants to pay market rents for housing. During the past 15 years, even as housing allowances became the dominant mode of Federal assistance, social housing programs grew at the local level. Comparison of model social housing and housing allowance programs by the number of people helped over time, effects on economic integration, and program stability suggests that the choice between these programs depends primarily on alternative expectations for the future. The most active local constituencies favoring housing programs for low-income people have pessimistic expectations about the national economy and the social safety net, as well as professional interests that are likely to favor social housing programs more than housing allowances.     

Studies of temperature and time-dependent network formation in commercial epoxy resins using modified imidazole curing agents

Two commercial epoxy resins, MY750 and MY720, were cured over a range of cure temperatures with a series of novel curing agents based on modified imidazoles. A combination of techniques, including dynamic viscometry, proton nuclear magnetic resonance spectroscopy, differential scanning calorimetry, high performance and gel permeation chromatography, were used to analyse the reaction mixture. It appears that for a given formulation and given resin, the viscosity behaviour near gelation is different for different cure temperatures and the mechanism appears to be dependent not only on the nature of the imidazole curing agent, but also on the cure temperature. Higher temperature cure appears to lead to the formation of a less ‘homogeneous’ reaction mixture at the gel point, containing oligomeric chain lengths of higher polydispersity, whereas in the lower temperature cure, oligomers of a smaller range of chain lengths are present.     

Electrochemical production of alkoxy-substituted phenols

The electrochemical oxidation of hydroquinone and substituted hydroquinones has been studied over graphite and platinum electrodes in different alcohol media. The results have shown that good yields of the corresponding alkoxy-substituted phenols can be obtained with high selectivities towards the hydroquinone monoalkyl ether. A mechanism is put forward to explain the formation of the alkoxyphenol through the creation of a quinhydrone complex, formed between the hydroquinone and benzoquinone, which is then attacked by the alcohol acting as a nucleophile.In this study, the effect of sulfuric acid as supporting electrolyte and acid catalyst was compared with that of methanesulfonic acid. It was found that sulfuric acid gave the best yield for different alkoxyphenols. The alcohols under investigation were C₁-C₈, and it was found that the longer the chain length of the alcohol, the slower the tendency to produce alkoxyphenols. Branched alcohols such as secondary and tertiary alcohols showed no reactivity towards the quinhydrone complex. Some of the yields obtained are as follows: 4-methoxyphenol (97%), 4-ethoxyphenol (71.4%) and 4-propoxyphenol (81.1%).     

Large-area nanoscale patterning: chemistry meets fabrication

This Account describes a new paradigm for large-area nanoscale patterning that combines bottom-up and top-down approaches, merging chemistry with fabrication. This hybrid strategy uses simple nanofabrication techniques to control the alignment, size, shape, and periodicity of nanopatterns and chemical methods to control their materials properties and crystallinity. These tools are highly flexible and can create surface-patterned nanostructures with unusual properties and free-standing nanostructures that are multifunctional and monodisperse. The unprecedented scientific and technological opportunities enabled by nanoscale patterning over wafer-sized areas are discussed.     

Lycopene from two food sources does not affect antioxidant or cholesterol status of middle-aged adults

Background

Epidemiological studies have reported associations between reduced cardiovascular disease and diets rich in tomato and/or lycopene. Intervention studies have shown that lycopene-containing foods may reduce cholesterol levels and lipid peroxidation, factors implicated in the initiation of cardiovascular disease. The objective of this study was to determine whether consumption of lycopene rich foods conferred cardiovascular protection to middle-aged adults as indicated by plasma lipid concentrations and measures of ex vivo antioxidants.

Methods

Ten healthy men and women consumed a low lycopene diet with no added lycopene (control treatment) or supplemented with watermelon or tomato juice each containing 20 mg lycopene. Subjects consumed each treatment for three weeks in a crossover design. Plasma, collected weekly was analyzed for total cholesterol, high density lipoprotein cholesterol (HDL-C) and triglyceride concentrations and for the antioxidant biomarkers of malondialdehyde formation products (MDA), plasma glutathione peroxidase (GPX) and ferric reducing ability of plasma (FRAP). Data were analyzed using Proc Mixed Procedure and associations between antioxidant and lipid measures were identified by Pearson's product moment correlation analysis.

Results

Compared to the control diet, the lycopene-containing foods did not affect plasma lipid concentrations or antioxidant biomarkers. Women had higher total cholesterol, HDL-C and triglyceride concentrations than did the men. Total cholesterol was positively correlated to MDA and FRAP while HDL-C was positively correlated to MDA and GPX. GPX was negatively correlated to triglyceride concentration.

Conclusions

The inclusion of watermelon or tomato juice containing 20 mg lycopene did not affect plasma lipid concentrations or antioxidant status of healthy subjects. However, plasma cholesterol levels impacted the results of MDA and FRAP antioxidant tests.     

On upgrading the numerics in combustion chemistry codes

A method of updating and reusing legacy FORTRAN codes for combustion simulations is presented using the DAEPACK software package. The procedure is demonstrated on two codes that come with the CHEMKIN-II package, CONP and SENKIN, for the constant-pressure batch reactor simulation. Using DAEPACK generated code, analytical derivative calculations, sparsity pattern information, and hidden discontinuity information can be obtained for the models of interest. This information can be easily integrated with different solvers giving the modeler great flexibility in selecting the best solution procedure. Using the generated code, the CONP code was connected to three different solvers, and the SENKIN code was connected to two different solvers. The effect of model formulation, analytical derivatives, sparsity, and sensitivity equation solution method were analyzed for three large kinetic mechanisms for methane, acetylene, and n-heptane. For the n-heptane model, with 544 species and 2446 reactions, a factor of 10-speed improvement over the original solution procedure was found using analytical derivatives and sparse linear algebra. For sensitivity calculations, for a small number of parameters, a factor of 55 improvement over the original solution procedure was found for the n-heptane problem. Upon closer examination of results, no one method is found to always be superior to other methods, and selection of the appropriate solution procedure requires an examination of the specific kinetic mechanism, which is easily conducted using DAEPACK generated code.     

Evolution of Microstructure and Mechanical Properties of Oxide Dispersion Strengthened Steels Made from Water-Atomized Ferritic Powder

Nano-structured oxide dispersion strengthened (ODS) steels produced from a 410L stainless steel powder prepared by water-atomization was studied. The influences of Ti content and milling time on the microstructure and the mechanical properties were analysed. It was found that the ODS steels made from the Si bearing 410L powder contained Y–Ti–O, Y–Ti–Si–O, Y–Si–O, and TiO₂ oxides. Most nanoparticles produced after 80 h of milling were aggregated nanoparticles; however, after 160 h of milling, most aggregated nanoparticles dissociated into smaller individual nanoparticles. Perfect mixing of Y and Ti was not achieved even after the longer milling time of 160 h; instead, the longer hours of milling rather resulted in Si incorporation into the Y–Ti–O rich nanoparticles and a change in the matrix morphology from an equiaxed microstructure to a tempered martensite-like microstructure. The overall micro-hardness of the ODS steel increased with the increase of milling time. After 80 and 160 h, the microhardnesses were over 400 HV, which primarily resulted from the finer dispersed nanoparticles and in part to the formation of martensitic phases. Tensile strength of the 410L ODS steels was comparable with that of ODS steel produced from gas-atomized powder.     

Stability of Y-Ti-O nanoparticles during laser deposition of oxide dispersion strengthened steel powder

This study investigated the feasibility of a direct energy deposition process for fabrication of oxide dispersion strengthened steel cladding. The effect of the laser working power and scan speed on the microstructural stability of oxide nanoparticles in the deposition layer was examined. Y-Ti-O type oxide nanoparticles with a mean diameter of 45 nm were successfully dispersed by the laser deposition process. The laser working power significantly affected nanoparticle size and number density. A high laser power with a low scan speed seriously induced particle coarsening and agglomeration. Compared with bulk oxide dispersion strengthened steel, the hardness of the laser deposition layer was much lower because of a relatively coarse particle and grain size. Formation mechanism of nanoparticles during laser deposition was discussed.