High-speed and low-power scalable Hamming weight comparator based on a non-weighted switched-capacitor array

Many practical applications require a comparison of the Hamming weights of two N-bit binary vectors. This comparison can be performed in a fully digital manner or by a mix of analog and digital techniques. In this paper, we propose a design in the latter category that exhibits advantages in speed and power dissipation compared with the best previous designs. The proposed design comprises of two switched-capacitor arrays associated with two comparators placed in parallel, collectively providing a complete comparison outcome of “>”, “<”, or “=”. The switched-capacitor array circuit is composed of uniform capacitances, thus associating identical charges with all bits, independent of their positions in the input bit-vectors. Once charge accumulation has occurred based on the asserted inputs, the two comparators release the final decision concurrently. The structure is shown to support wide input vectors on the order of 64 bits, while requiring a small silicon area for capacitor array structures, CMOS switches, and latched comparators to compute and store the comparison outcome. HSPICE simulation shows a total power consumption of 1.136 mW, evaluated at the operating frequency of 1 GHz (based on input-to-decision delay) for 16 bit input vectors under 0.15 μm TSMC technology.     

A note on using revealed comparative advantages in scientometrics studies

Scientometrics - In recent years, revealed comparative advantage (RCA) index has been widely considered by researchers in all fields of science. This index, which was introduced by Ballassa, is an...     

Molecularly Capped Omniphobic Polydimethylsiloxane Brushes with Ultra-Fast Contact Line Dynamics

Droplet friction is common and significant in any field where liquids interact with solid surfaces. This study explores the molecular capping of surface-tethered, liquid-like polydimethylsiloxane (PDMS) brushes and its substantial effect on droplet friction and liquid repellency. By exchanging polymer chain terminal silanol groups for methyls using a single-step vapor phase reaction, the contact line relaxation time is decreased by three orders of magnitude–from seconds to milliseconds. This leads to a substantial reduction in the static and kinetic friction of both high- and low-surface tension fluids. Vertical droplet oscillatory imaging confirms the ultra-fast contact line dynamics of capped PDMS brushes, which is corroborated by live contact angle monitoring during fluid flow. This study proposes that truly omniphobic surfaces should not only have very small contact angle hysteresis, but their contact line relaxation time should be significantly shorter than the timescale of their useful application, i.e., a Deborah number less than unity. Capped PDMS brushes that meet these criteria demonstrate complete suppression of the coffee ring effect, excellent anti-fouling behavior, directional droplet transport, increased water harvesting performance, and transparency retention following the evaporation of non-Newtonian fluids.     

Catalytic pyrolysis of waste polyethylene terephthalate granules using a Lewis-Brønsted acid sites catalyst

Clean Technologies and Environmental Policy - Among municipal polymer wastes, polyethylene terephthalate (PET) is unique due to its widespread use in the plastics industry. The wide range of...     

Photoactive and self-cleaning TiO2-SiO2 thin films on 316L stainless steel

In this study, TiO₂-SiO₂ nanocomposite films with different amounts of SiO₂ were prepared by sol-gel process and were coated onto stainless steel 316L. The effect of addition of various amount of SiO₂ in the precursor solution on the photocatalysis, photo-generated hydrophilicity and self-cleaning property of TiO₂ thin films was investigated by X-ray diffraction, Fourier transform infrared spectroscopy, water contact angle measurements and UV spectroscopy. In the tested ranges of SiO₂ content and sintering temperature, the highest photocatalytic activity and self-cleaning property were observed in the 15 mol% SiO₂ sample sintered at 750 °C. Addition of less than 30 mol% SiO₂ had a suppressive effect on the transformation of anatase to rutile and on the crystal growth of anatase in the sintering heat treatment. Phase separation occurred in the composite films for SiO₂ content of 30 mol% or more.     

Antioxidant Activity,Reaction Mechanisms,and Kinetics of Matricaria recutita Extract in Commercial Blended Oil Oxidation

Antioxidant activity, reaction mechanisms, and kinetics of Matricaria recutita crude extract (CE; total phenolics: 41 ± 2.5 mg/g, total flavonoids: 26 ± 1.4 mg/g, IC₅₀: 82.3 ± 2.8 µg/mL and reducing power: 10.45 ± 0.56 mmol Fe²⁺/mass) in comparison to tert-Butylhydroquinone during oxidation of blended vegetable oil (sunflower, soybean, and palm oil) at 120, 130, and 140°C were studied. Good correlations existed between the Rancimat oil stability index and stability indices (induction period) calculated from peroxide value, conjugated diene value, and anisidine value with no significant differences in kinetic parameters calculated from them. The temperature acceleration (Q₁₀), activation energy (E_a), frequency factor (A), enthalpy (ΔH⁺⁺), entropy (ΔS⁺⁺), and free energy of activation (ΔG⁺⁺) for oils containing crude extract were lower than for oils containing tert-Butylhydroquinone (0.0025, 0.005, 0.01, and 0.02%). Values were independent of crude extract or tert-Butylhydroquinone concentration. For crude extract and tert-Butylhydroquinone, E_a and A were well correlated with ΔH⁺⁺ and ΔS⁺⁺ values, respectively, but correlation between E_a and Q₁₀ for crude extract compared to tert-Butylhydroquinone was poor. Furthermore, the rate of Monounsaturated:Polyunsaturated fatty acids formation did not differ significantly between crude extract and tert-Butylhydroquinone, but concentrations of them did affect Monounsaturated:Polyunsaturated ratio. Based on the results obtained, crude extract decreased the rate of the oxidation reaction due to the decrease in the concentration of the activated complex and reduction in the rate at which the activated complex dissociated into oxidation products.     

Effect of applied voltage on jet electric current and flow rate in electrospinning of polyacrylonitrile solutions

BACKGROUND: In the electrospinning process, through subjecting a pendent drop of a polymer solution to a high electric field, a fluid jet is ejected from the drop. To have a stable process, the rate at which the fluid is forced into the drop and the rate at which the fluid is carried away by the jet must be equal. A method is reported to find the point at which the flow into the drop is equal to the flow out of the drop. RESULTS: In the electrospinning of polyacrylonitrile solutions, by applying different voltages at a constant solution feed rate, two jet regimes were observed: stable jet and fluctuating jet regimes. The stable jet regime occurred at low voltages where the jet flow rate was lower than the feed rate, and the fluctuating jet regime occurred at higher voltages where the jet flow rate exceeded the feed rate. The highest voltage in the stable jet regime was the point where the jet flow rate was equal to the feed rate. This point was determined for different feed rates. CONCLUSION: By applying various voltages at different feed rates, and investigating the jet current, a curve showing stable processing points can be obtained. Copyright © 2008 Society of Chemical Industry     

Design and study of an enhanced filament ion source

Filament ion sources (FISs) have been used in the production of high current of H⁻ ions for a wide variety of research fields and applications. The major deficiency in FIS performance is the escape of energetic electrons produced by filament striking with interior metal surfaces of the FIS. To avoid this problem, magneto-static fields produced by permanent magnets are used. Some kinds of same polarity FIS with superior performance than traditional alternating polarity FIS have been reported. Here, we propose a novel FIS and a method to compare different FISs. The purpose of this design is to recapture more energetic electrons with lower number of permanent magnets. Performance simulations of the proposed FIS show considerable improvement over other reported FISs.     

Study the Synthesis,Characterization and Immersion of Dense and Porous Bovine Hydroxyapatite Structures in Hank’s Balanced Salt Solution

The bone-bonding potential of biomaterials is evaluated in vitro through examining the surface apatite formation in Hank’s media to enhance biocompatibility, which is also applicable to facilitate in vivo osseointegration of implantable devices. Hence, bovine hydroxyapatite (BHA) bioceramic structures have been used in various biomedical applications such as orthopedic implants. In this article, the microstructure, in vitro bioactivity, and nanomechanical properties of the synthesized dense and porous BHA are investigated via scanning electron microscopy, x-ray diffraction, energy-dispersive x-ray spectroscopy, Fourier transform infrared spectroscopy, and nanoindentation analysis. From the obtained results, porous BHA mostly possesses adequate requirements for substitution as implants in the human body.