Time-resolved GISAXS and cryo-microscopy characterization of block copolymer membrane formation

Time-resolved grazing-incidence small-angle X-ray scattering (GISAXS) and cryo-microscopy were used for the first time to understand the pore evolution by copolymer assembly, leading to the formation of isoporous membranes with exceptional porosity and regularity. The formation of copolymer micelle strings in solution (in DMF/DOX/THF and DMF/DOX) was confirmed by cryo field emission scanning electron microscopy (cryo-FESEM) with a distance of 72 nm between centers of micelles placed in different strings. SAXS measurement of block copolymer solutions in DMF/DOX indicated hexagonal assembly with micelle-to-micelle distance of 84–87 nm for 14–20 wt% copolymer solutions. GISAXS in-plane peaks were detected, revealing order close to hexagonal. The d-spacing corresponding to the first peak in this case was 100–130 nm (lattice constant 115–150 nm) for 17 wt% copolymer solutions evaporating up to 100 s. Time-resolved cryo-FESEM showed the formation of incipient pores on the film surface after 4 s copolymer solution casting with distances between void centers of 125 nm.     

Polyamide 6–Cellulose Composites: Effect of Cellulose Composition on Melt Rheology and Crystallization Behavior

Melt rheology and crystallization behavior of polyamide 6 (PA 6) and microcrystalline cellulose (MCC) composites were systematically studied in this research. The incorporation of MCC into the PA 6 matrix resulted in higher complex viscosities (|η*|), storage modulus (G′), and shear viscosities than those of neat PA 6, especially at low frequencies. The orientation of rigid molecular chains in the composites introduced by the addition of MCC induced a strong shear thinning behavior with an increase in MCC loading. The non‐isothermal crystallization kinetics of PA 6 and MCC composites were investigated by differential scanning calorimetry. The Avrami and Tobin model were applied to describe the process of non‐isothermal crystallization and to determine the crystallization parameters of the composites. Analysis of the crystallization kinetics indicated that the Avrami (n_a) and Tobin exponent (n_t) was altered by the MCC. It was also found that the Avrami and Tobin equations fit the empirical data well. POLYM. ENG. SCI., 54:739–746, 2014. © 2013 Society of Plastics Engineers     

An Overview on SARS‑CoV‑2(COVID‑19)and Other Human Coronaviruses and Their Detection Capability via Amplification Assay,Chemical Sensing,Biosensing,Immunosensing,and Clinical Assays

A novel coronavirus of zoonotic origin(SARSCoV-2)has recently been recognized in patients with acute respiratory disease.COVID-19 causative agent is structurally and genetically similar to SARS and bat SARS-like coronaviruses.The drastic increase in the number of coronavirus and its genome sequence have given us an unprecedented opportunity to perform bioinformatics and genomics analysis on this class of viruses.Clinical tests like PCR and ELISA for rapid detection of this virus are urgently needed for early identification of infected patients.However,these techniques are expensive and not readily available for point-of-care(POC)applications.Currently,lack of any rapid,available,and reliable POC detection method gives rise to the progression of COVID-19 as a horrible global problem.To solve the negative features of clinical investigation,we provide a brief introduction of the general features of coronaviruses and describe various amplification assays,sensing,biosensing,immunosensing,and aptasensing for the determination of various groups of coronaviruses applied as a template for the detection of SARS-CoV-2.All sensing and biosensing techniques developed for the determination of various classes of coronaviruses are useful to recognize the newly immerged coronavirus,i.e.,SARS-CoV-2.Also,the introduction of sensing and biosensing methods sheds light on the way of designing a proper screening system to detect the virus at the early stage of infection to tranquilize the speed and vastity of spreading.Among other approaches investigated among molecular approaches and PCR or recognition of viral diseases,LAMP-based methods and LFAs are of great importance for their numerous benefits,which can be helpful to design a universal platform for detection of future emerging pathogenic viruses.     

Resorcinol formaldehyde xerogels modified with mercapto functional groups as mercury adsorbent

Resorcinol formaldehyde xerogels are modified by mercaptopropyl‐trimethoxysilane during the sol–gel process used to produce the xerogel. The chemical modification is confirmed by Fourier‐transform infrared spectroscopy. The xerogel is then used to adsorb mercury ions from aqueous solutions. The effects of the molar ratios of the precursors as well as the catalyst and the modifier are studied on the textural properties of the xerogel and the adsorption efficiency. It is shown that the chemical modification of the resorcinol formaldehyde xerogels creates the chemical sites on the structure of the xerogel to adsorb more mercury ions and increase the adsorption efficiency. At the same time, chemical modification decreases the xerogel surface area which results in a reduction of the mercury adsorption. Therefore, there exists an optimum value for the chemical modification of the xerogel to achieve the highest adsorption efficiency. Adsorption kinetics as well as equilibrium isotherm of xerogels were examined using pseudo‐first‐ and second‐order kinetic equations, and Freundlich and Langmuir isotherm models. The adsorption kinetics was found to follow the pseudo‐second‐order kinetic equations. The experimental data was also fitted into the Longmuir model more precisely comparing the Freundlich model. Finally, a series of mercury adsorption–desorption tests proved that the optimized mercapto‐modified resorcinol formaldehyde xerogel was an efficient reusable adsorbent for mercury ions. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42543.     

Survey on location information services for Vehicular Communication Networks

Vehicular Communication Networks (VCNs) are used to supply a communication platform for Intelligent Transportation Systems services also for value added services in different road systems. In comparison to other communication networks, VCNs come with major challenges: high mobility and velocity of vehicles that cause rapidly change topology of network and fast change of vehicle’s locations. Location information services (LISs) or location management systems (LMSs) are used to provide location information about vehicles such as current location, speed, direction and report this information to other vehicles or network entities that require this information. We present a survey for LISs in VCNs and introduce 11 approaches in literature. Moreover, we present a classification for LISs and compare mentioned approaches based on our classification. Finally we evaluate studied LISs by some performance properties to measure their overall efficiency.     

Significant improvement of semi-solid microstructure and mechanical properties of A356 alloy by ARB process

Accumulative roll bonding (ARB) process was used in this study as an effective method for manufacturing high-strength, finely-dispersed and highly-uniform A356 alloy. It was found that when the number of ARB cycles was increased, the uniformity of silicon particles in the aluminum matrix improved, the particles became finer and spheroider and therefore, the tensile strength (TS) and ductility of the samples improved. The microstructure of the manufactured A356 alloy after five ARB cycles indicated a totally modified structure such that it's TS and elongation values reached 269 MPa and 5.3% which were 2.6 and 2.5 times greater than those of the as-cast material, respectively. Also, the hardness value increased from 55.4 (for as-cast sample) to 100.2 HV (after the fifth cycle of ARB), and registered 81% increase.     

Evaluation of cast-on-strap joints in lead-acid batteries

The effects of various processing parameters on the lug–strap joint quality of lead-acid auto-batteries are investigated using a laboratory scale cast-on-strap (C.O.S.) set-up. The results indicate that while good quality joints are easily obtained at low cooling rates, at high cooling rate all the C.O.S. parameters such as flux type, strap composition and melt temperature must be carefully controlled to achieve an acceptable joint. Surface treatment with commercially available fluxes, strap melt temperature of 460 °C and strap antimony content of 4.6wt.% Sb render good quality joints at a high strap cooling rate. Furthermore, a dimensionless parameter (relative contact length) for evaluation of lug–strap joint quality is introduced which combines the important lug–strap joint features into a single quantitative parameter and could be used for design of experiments (DOE) and process optimization in the industrial scale.     

Formulation of dynamics,actuation, and inversion of a three‐dimensional two‐link rigid body system

In this paper, three issues related to three‐dimensional multilink rigid body systems are considered: dynamics, actuation, and inversion. Based on the Newton‐Euler equations, a state space formulation of the dynamics is discussed that renders itself to inclusion of actuators, and allows systematic ways of stabilization and construction of inverse systems. The development here is relevant to robotic systems, biological modeling, humanoid studies, and collaborating man‐machine systems. The recursive dynamic formulation involves a method for sequential measurement and estimation of joint forces and couples for an open chain system. The sequence can start from top downwards or from the ground upwards. Three‐dimensional actuators that produce couples at the joints are included in the dynamics. Inverse methods that allow estimation of these couples from the kinematic trajectories and physical parameters of the system are developed. The formulation and derivations are carried out for a two‐link system. Digital computer simulations of a two‐rigid body system are presented to demonstrate the feasibility and effectiveness of the methods. © 2005 Wiley Periodicals, Inc.