Name‐Based Autoconfiguration for Mobile Ad hoc Networks

In a mobile ad hoc network, difficulties exist in supporting address autoconfiguration and naming resolution due to the lack of centralized servers. This letter presents a novel approach, called name‐based autoconfiguration (NBA), which uses host names to determine IP addresses and provides address autoconfiguration and name resolution as a single protocol.     

Testing of the multi-application small light water reactor (MASLWR) passive safety systems

Experimental thermal hydraulic research has been conducted at Oregon State University for the purpose of assessing the performance of a new reactor design concept, the multi-application small light water reactor (MASLWR). The MASLWR is a pressurized light water reactor design with a net output of 35 MWe that uses natural circulation in both normal and transient operation. Due to its small size, portability and modularity, the MASLWR design is well suited to help fill the potential need for grid appropriate reactor designs for smaller electricity grids as may be found in developing or remote regions. The purpose of the OSU MASLWR test facility is to assess the operation of the MASLWR under normal full operating pressure and full temperature conditions and to assess the passive safety systems under transient conditions. The data generated by the testing program will be used to assess computer code calculations and to provide a better understanding of the thermal-hydraulic phenomena in the design of the MASLWR NSSS. During this testing program, four tests were conducted at the OSU MASLWR test facility. These tests included one design basis accident and one beyond design basis accident. During the performance of these tests, plant operations to include start up, normal operation and shut down evolutions were demonstrated successfully.     

Node cooperation in hybrid ad hoc networks

A hybrid ad hoc network is a structure-based network that is extended using multihop communications. Indeed, in this kind of network, the existence of a communication link between the mobile station and the base station is not required: A mobile station that has no direct connection with a base station can use other mobile stations as relays. Compared with conventional (single-hop) structure-based networks, this new generation can lead to a better use of the available spectrum and to a reduction of infrastructure costs. However, these benefits would vanish if the mobile nodes did not properly cooperate and forward packets for other nodes. In this paper, we propose a charging and rewarding scheme to encourage the most fundamental operation, namely packet forwarding. We use "MAC layering" to reduce the space overhead in the packets and a stream cipher encryption mechanism to provide "implicit. authentication" of the nodes involved in the communication. We analyze the robustness of our protocols against rational and malicious attacks. We show that-using our solution-collaboration is rational for selfish nodes. We also show that our protocols thwart rational attacks and detect malicious attacks.     

Energy storage devices for future hybrid electric vehicles

Powertrain hybridization as well as electrical energy management are imposing new requirements on electrical storage systems in vehicles. This paper characterizes the associated vehicle attributes and, in particular, the various levels of hybrids. New requirements for the electrical storage system are derived, including: shallow-cycle life, high dynamic charge acceptance particularly for regenerative braking and robust service life in sustained partial-state-of-charge usage. Lead/acid, either with liquid or absorptive glass-fibre mat electrolyte, is expected to remain the predominant battery technology for 14 V systems, including micro-hybrids, and with a cost-effective battery monitoring system for demanding applications. Advanced AGM batteries may be considered for mild or even medium hybrids once they have proven robustness under real-world conditions, particularly with respect to cycle life at partial-states-of-charge and dynamic charge acceptance. For the foreseeable future, NiMH and Li-ion are the dominating current and potential battery technologies for higher-functionality HEVs. Li-ion, currently at development and demonstration stages, offers attractive opportunities for improvements in performance and cost. Supercapacitors may be considered for pulse power applications. Aside from cell technologies, attention to the issue of system integration of the battery into the powertrain and vehicle is growing. Opportunities and challenges for potential “battery pack” system suppliers are discussed.     

Fracture mechanics global approach concepts applied to creep slow crack growth in a medium density polyethylene (MDPE)

Creep fracture by slow crack growth is studied in a medium density polyethylene at 60 °C and 80 °C. Whereas elastic-plastic fracture mechanics load parameters fail to provide a unique temperature-independent correlation, that of the fracture mechanics for creeping solids C^∗ is proved to be relevant since this parameter correlates very well with the time to failure. Correlation established on both full notched creep tensile and double edge notched tensile tests was validated on cracked gas-pipe samples tested under hydrostatic pressure, extending the use of time to failure versus C^∗ diagram to predict lifetime of engineering components.     

Influence of thermal boundary conditions on natural convection in a square enclosure partially heated from below

Natural convection in air-filled 2D square enclosure heated with a constant source from below and cooled from above is studied numerically for a variety of thermal boundary conditions at the top and sidewalls. Simulations are performed for two kinds of lengths of the heated source, i.e., a small and a large source corresponding to 20% and 80% of the total length of the bottom wall, respectively. The Rayleigh number varied from 10³ to 10⁷. Results are presented in the form of streamline and isotherm plots as well as the variation of the Nusselt number and maximum temperature at the heat source surface. Comparisons among the different thermal configurations considered are reported.     

Potent and selective bicyclic lactam inhibitors of thrombin: Part 2: P1 modifications

The synthesis and antithrombotic activity of a series of nonpeptide bicyclic thrombin inhibitors is described. We have explored the SAR with modifications to the P1 site. The introduction of arginine mimetics at the P1 site led to potent and selective thrombin inhibitors.     

Effect of surfactant replacement therapy on the outcome of premature infants with respiratory distress syndrome

Lung surfactant replacement has been tested clinically in recent years. In this study the outcome of 31 premature infants with moderate to severe neonatal respiratory distress syndrome (RDS) treated with surfactant was compared to that of 74 prematures with RDS treated conventionally by positive pressure ventilation and supportive care. The groups were well matched for gestational age, birthweight, sex, and Apgar scores at 1 and 5 min. Surfactant treatment resulted in a significant decrease in mortality--from 36.6% in the untreated group to 12.9% in the surfactant-treated group (P < 0.04). This improvement in survival was seen also in prematures with a birthweight < 1,000 g; in the untreated group mortality was 57.6% compared to 23.5% in the treated group (P < 0.05). The incidence of pneumothorax was lower in the treated group--42% vs. 13% (P < 0.01). Surfactant treatment resulted in a trend of more survivors without bronchopulmonary dysplasia or intraventricular hemorrhage, even though surfactant therapy did not change the incidence of either.     

基于CFD分析技术的水力优化设计方法在云南绿水河二级电站机组改造项目中的应用

云南绿水河二级电站高水头混流式水轮发电机组,由于受到当时的技术水平限制,自1969年设备投运后问题较多,电站进行了多次技术改造,但机组仍然存在机组效率低下、汽蚀和泥沙磨损问题,同时由于转轮的过流能力有限,远没有充分利用现有水力资源,本次电站改造的目标是提效增容,充分利用水力资源,改善汽蚀性能和解决泥沙磨损问题,保证机长期安全稳定运行,改造范围是对2号、3号和4号机组进行全面改造.电站改造采用基于CFD技术的水力优化设计方法的核心技术对电站存在的问题进行了针对性设计,给出了行之有效的全面解决方案,成功地完成了电站改造目标.