Electrochemical properties of composite materials based on graphite and vanadium disilicide

Electrodes with different composition were prepared by the method of pressing followed by sintering of the graphite and vanadium disilicide powders, and their electrochemical and corrosion properties in water solutions of electrolytes were studied.Translated from Inzhenerno-Fizicheskii Zhuraal, Vol. 52, No. 5, pp. 802–707, May, 1987.     

A new boundary-layer wind tunnel at the Danish Maritime Institute

The paper describes a new boundary-layer wind tunnel at the Danish Maritime Institute in Lyngby. The wind tunnel is of the open-circuit type and is integrated into a building raised for the purpose. The design was constrained by the need to provide a simulation of the atmospheric boundary layer (without thermal stratification) and alternatively a uniform flow without excessive turbulence.The wind tunnel has a working section of principal dimensions: length 20.8 m, width 2.6 m and height 1.8 m (adjustable from 1.8 to 2.3 m). The maximum wind speed in the working section when empty is about 26 m s^?1.Data acquisition, analysis and instrumentation in relation to the new wind tunnel are discussed and, finally, an example of a simulated natural wind is presented.     

Analysis of the turbine deblading in an HTGR with the CATHARE code

The direct coupling of a Gas Cooled Reactor (GCR) with a closed gas-turbine cycle leads to a specific dynamic plant behaviour. This behaviour is described and illustrated through computer analyses performed at CEA with the computer code CATHARE. This analysis requires a 1D code able to simulate the whole reactor, including the core, the vessel, the piping and the components (turbine, compressors, heat exchangers).This paper is devoted to deblading accidents. The problems and solutions encountered in various types of gas-turbines are presented: aero engines, steam turbines (EDF-Porcheville steam turbine accident feedback) and finally the feedback from previous High Temperature Gas Reactor experiments (EVO helium loop, HHT project and other HTR projects) are displayed. From this literature survey, some recommendations are drawn for a future High Temperature Reactor. It is shown that for safety reasons in case of deblading, a horizontal shaft aligned with the reactor vessel is recommended for the turbomachinery.This paper presents simulations of different scenarii performed with CATHARE code:

(a) Turbine deblading with and without reactor trip. In these calculations, a pessimistic assumption has been made: all turbine blades break off.

(b) Total flow blockage. The flow area is entirely blocked by the turbine blades.

(c) Partial flow blockage. Previous conclusions consider the worst cases of deblading and total flow blockage. An intermediate case based on a partial deblading has also been performed.

CATHARE results illustrate that the loss of turbine blades is accompanied by abrupt changes in the Power Conversion System and reactor flow conditions: large axial pressure drop, reverse flow through the core and high rate de-pressurization.     

Phase equilibria in the system Al-Rh

Methods of differential thermal analysis, x-ray diffraction, microstructural analysis and electron probe microanalysis are used to study alloys of the Al-Rh system over the whole concentration range. It is established that the phase of equiatomic composition AlRh melts congruently at 2060°C and it has an extended range of homogeneity (45.1–54.2 at.% Rh). The solubility of aluminum in rhodium reaches 9 at.%, decreasing to 6 at.% at 850°C. Coordinates are determined for the eutectic point l ⇆ AlRh + 〈Rh〉 as 70 at.% Rh and 1715°C. The existence of intermediate phases, their crystal structure, and also the method of forming phases in the field of composition rich in aluminum given in publications are confirmed. __________ Translated from Poroshkovaya Metallurgiya, Nos. 5–6(449), pp. 48–56, May–June, 2006.     

Internal-corrosion inhibitors for pipelines carrying deaerated heating water

The effect of internal-corrosion inhibitors on heating-system pipelines is investigated. Tests were conducted on a testing device for polarization measurements under conditions corresponding to the Rostov Heat-Supply System. The concentration of OEDP-zinc, which provides a high degree of protection from general corrosion, is determined. The reagent has been successfully incorporated into the Rostov No. 2 TPP. __________ Translated from élektricheskie Stantsii, No. 7, July 2007, pp. 37–43.     

Stable Oxygen and Carbon Isotopic Compositions of Lates stappersii Otoliths from Lake Tanganyika,East Africa

In this study, we measured growth trends in oxygen and carbon isotopic ratios in whole sagittal otoliths from three adult centropomid fish (Lates stappersii) from each of three sub-basins of Lake Tanganyika, East Africa. Sampling density was 20 to 50 samples per otolith. Both δ¹⁸O and δ¹³C values increase with age. The δ¹⁸O data suggest that otoliths were precipitated near the expected equilibrium with the ambient environment (ca. +3.5‰) and support a migration pattern from surface waters during larval stages to deeper waters (40 to 80 m) for mature fish. Relatively high δ¹⁸O values in the southern sub-basin are consistent with cooler temperatures in the region during seasonal upwelling. The δ13C increase from otolith core to edge is large (up to 4‰) and is interpreted as due to ontogenetic changes in diet and contributions from a decrease in the proportion of respired CO₂ incorporated into otolith carbonate as metabolic rates of the fish dropped with maturity. The data seem to successfully reveal life strategy and migration patterns of L. stappersii, document regional differences in lake conditions, and provide a record of temperature within the water column during which the fish lived. Higher resolution studies and analyses of historical samples could be used to constrain modern and past growth patterns, and to reconstruct past temperature gradients and productivity patterns in the lake.     

Internal-corrosion inhibitors for pipelines in heat-supply systems carrying water with a high oxygen content

The reliability of heat-supply systems is determined primarily by internal corrosion of the pipelines. The concentration of oxygen in the water exerts a major influence on the corrosion. In systems with a standard oxygen content, OéDF-Zn is a highly effective corrosion inhibitor. However, there are systems in which the quality of deaeration of the make-up water of the heat-supply system is low (or deaeration is nonexistent), and the concentration of oxygen is considerably above the standard value. Classed among these systems, for example, are the HWS systems, which are incorporated into closed heat-supply systems. The oxygen concentration in these systems is analyzed to assess the situation. __________ Translated from élektricheskie Stantsii, No. 6, June 2007, pp. 35–39.     

Temperature effects on the mass flow rate in the SBI and similar heat‐release rate test equipment

In various medium‐to‐large‐scale fire test equipments like the ISO room corner test (RC), and more recently, the single burning item test (SBI) the mass flow rate measurement of the combustion gases plays a key role in the determination of the heat‐release rate and smoke‐production rate. With the knowledge of the velocity profile and the temperature of the flow, the mass flow rate is obtained by measuring the velocity on the axis of the duct. This is done by means of a bi‐directional probe based on the pitot principle. However, due to the variation of the mean temperature and the temperature gradient in any cross section of the duct, introduced by ever changing combustion gas temperatures, the velocity nor the density profile are constant in time. This paper examines the resulting uncertainty on the mass flow rate. Copyright © 2006 John Wiley & Sons, Ltd.     

Performance of a non‐load‐bearing steel stud gypsum board wall assembly: Experiments and modelling

A gypsum wall assembly was exposed to an intense real‐scale compartment fire. For the wall assembly, temperatures were measured at the exposed face, within the stud cavity, and at the unexposed face during the fire exposure. Total heat flux gauges were used to measure the temporal variation of the energy incident on the walls, and cameras, both visual and infrared, were used to image the unexposed face of the wall assembly during the fire exposure. The behaviour of the wall assembly under the fire load is discussed as are current model results for a simulation of the fire test. Copyright © 2006 John Wiley & Sons, Ltd.     

Hydrogen reduction kinetics of electrometallurgical slime

The interaction of hydrogen with the zinc-containing electrometallurgical slime of the Severstal’ metallurgical works has been studied. The sequence of transformations in the slime heated to 1100°C in hydrogen or air has been established. The experimental and calculated weight losses coincide. Some of the carbonates are shown to decompose in the temperature range 300–700°C, and most iron and zinc oxides are reduced to a metal. In the temperature range 650–850°C, zinc is almost completely sublimated. At temperatures above 800°C, complex oxides are reduced and calcium and magnesium carbonates and sulfates are likely to decompose. Experimental digital data on the zinc sublimation rate are processed by the least squares method with approximating equations used in thermal analysis. The kinetics of nonisothermal zinc sublimation is comprehensively analyzed using a unique procedure developed for taking into account the background of a peak and the effect of accompanying processes. An equation for the calculation of the zinc sublimation rate under experimental conditions (fluidized bed) is given and tested.