Decomposition of electromagnetic boundary conditions at planarinterfaces with applications to TE and TM field solutions

Electromagnetic fields in homogeneous source-free regions can be decomposed into fields that are TE and TM with respect to a particular reference direction (e.g., the z direction). If transverse sources exist, both TE and TM fields may be excited simultaneously. This paper considers the case of two infinite regions having a common planar interface and prescribed sources (surface currents) on the interface. The source currents are decomposed in a manner consistent with the decomposition of the fields. Accordingly, a procedure is established for describing the boundary conditions at the interface in terms of the longitudinal field components E_z, H_z and the surface currents J¯_s. The development is unique in that the continuity of the transverse field components at the boundary are not explicitly considered but interpreted in terms of z-directed fields. This boundary condition approach is shown to give results consistent with those obtained by matching the tangential fields at the interface using vector transforms. A simple example illustrating the procedure using a ring of current in free-space is presented     

Comparison of radiochemical purity control methods for 99Tcm radiopharmaceuticals used in hospital radiopharmacies

The free fraction of pertechnetate in 99Tcm radiopharmaceuticals has to be tested for quality control reasons in line with the European Pharmacopoeia. Such quality control is often performed by miniaturized chromatographic methods. There are several recommended methods in the literature for quality control of the same radiopharmaceuticals, though it is unlikely that all methods are equivalent. Some of these methods were compared, taking into account different parameters (spot size, time required, analytical artifacts, true separation and shape of the chromatographic peaks, ease of handling), to verify the best method for the control of each radiopharmaceutical. It would appear that instant thin layer chromatography silica gel is the best support for these miniaturized methods, using MEK as solvent to check DTPA, DMSA, gluconate, pyrophosphate, medronate and phytate; NaCl 20% solution is the best solvent for IDA derivatives, human albumin and albumin particles (microspheres, macroaggregates).     

BRCA1 mutations in women attending clinics that evaluate the risk of breast cancer

BACKGROUND: To define the incidence of BRCA1 mutations among patients seen in clinics that evaluate the risk of breast cancer, we analyzed DNA samples from women seen in this setting and constructed probability tables to provide estimates of the likelihood of finding a BRCA1 mutation in individual families. METHODS: Clinical information, family histories, and blood for DNA analysis were obtained from 263 women with breast cancer. Conformation-sensitive gel electrophoresis and DNA sequencing were used to identify BRCA1 mutations. RESULTS: BRCA1 mutations were identified in 16 percent of women with a family history of breast cancer. Only 7 percent of women from families with a history of breast cancer but not ovarian cancer had BRCA1 mutations. The rates were higher among women from families with a history of both breast and ovarian cancer. Among family members, an average age of less than 55 years at the diagnosis of breast cancer, the presence of ovarian cancer, the presence of breast and ovarian cancer in the same woman, and Ashkenazi Jewish ancestry were all associated with an increased risk of detecting a BRCA1 mutation. No association was found between the presence of bilateral breast cancer or the number of breast cancers in a family and the detection of a BRCA1 mutation, or between the position of the mutation in the BRCA1 gene and the presence of ovarian cancer in a family. CONCLUSIONS: Among women with breast cancer and a family history of the disease, the percentage with BRCA1 coding-region mutations is less than the 45 percent predicted by genetic-linkage analysis. These results suggest that even in a referral clinic specializing in screening women from high-risk families, the majority of tests for BRCA1 mutations will be negative and therefore uninformative.     

Ultralow-voltage boron-doped diamond field emitter vacuum diode

A boron-doped diamond field emitter diode with ultralow turn-on voltage and high emission current is reported. The diamond field emitter diode structure with a built-in cap was fabricated using molds and electrostatic bonding techniques. The emission current versus anode voltage of the capped diamond emitter diode with boron doping, sp² content, and vacuum thermal electric (VTE) treatment shows a very low turn-on voltage of 2 V. A high emission current of 1 μA at an anode voltage of less than 10 V can be obtained from a single diamond tip. The turn-on voltage is significantly lower than comparable silicon field emitters     

Gordon-Haus timing jitter reduction in dispersion-managed solitoncommunications

An analytic theory is presented which demonstrates that the noise induced Gordon-Haus timing jitter in arbitrary dispersion-managed transmission systems is reduced by the power-enhancement factor required to support a dispersion-managed solitons provided the path-average soliton period is much greater than the dispersion-map period. The analysis further predicts the behaviour of the amplitude, width, and quadratic chirp fluctuations due to the amplified spontaneous emission (ASE) noise     

Central motor conduction evaluation in glycogenosis type III

We report a 20-year-old man affected by glycogenosis type III with distal muscle weakness, more severe in distal leg muscles. The electromyogram showed myopathic features. Nerve conduction studies and central motor conduction after magnetic stimulation of the brain were normal. Our results suggest that there is no involvement of central motor pathways in this disease.     

Accuracy of using computed tomography to identify pedicle screw placement in cadaveric human lumbar spine

STUDY DESIGN: Utility of using computed tomography to predict pedicle screw misplacement. OBJECTIVE: This study defines the sensitivity and specificity of predicting pedicle screw placement by experienced clinicians using a CT scan image. SUMMARY OF BACKGROUND DATA: In clinical and research settings, the method most commonly used to evaluate pedicle screws placement has been computed tomography. However, no current literature describes the accuracy of this method of evaluating screw placement. METHOD: Cobalt-chrome and titanium alloy pedicle screws of identical size were placed in six cadaveric human lumbar spine. Wide laminectomy was performed to allow complete visualization of the pedicles. Three consecutive lumbar levels were instrumented in each spine, giving 36 pedicle screw placements to identify. The instrumented spines were imaged, and four orthopaedic spine surgeons and a musculoskeletal radiologist were asked to read the images to identify the accuracy of screw placement within the pedicles. RESULTS: The sensitivity rate of identifying a misplaced screw was 67 +/- 6% for cobalt-chrome screws compared with 86 +/- 5% for titanium screws (P < 0.005). The specificity rates of radiographic diagnosis of misplaced pedicle screws were 66 +/- 10% for cobalt-chrome screws and 88 +/- 8% for titanium screws (P < 0.005). Similarly, a statistically significant difference was found in the sensitivity rates of identifying screws placed correctly in the pedicle: 70 +/- 10% for cobalt-chrome screws versus 89 +/- 8% for titanium screws (P < 0.005). Overall accuracy rates were 68 +/- 7% for cobalt chrome screws versus 87 +/- 3% for titanium screws (P < 0.002). CONCLUSION: Reliance on the computed tomography scan data alone in determining accuracy of pedicle screws can lead to inaccuracies in both clinical and research conditions.     

Three-dimensional reconstruction of live embryos using roboticmacroscope images

To determine the three-dimensional (3-D) shape of a live embryo is a technically challenging task. The authors show that reconstructions of live embryos can be done by collecting images from different viewing angles using a robotic macroscope, establishing point correspondences between these views by block matching, and using a new 3-D reconstruction algorithm that accommodates camera positioning errors. The algorithm assumes that the images are orthographic projections of the object and that the camera scaling factors are known. Point positions and camera errors are found simultaneously. Reconstructions of test objects and embryos show that meaningful reconstructions are possible only when camera positioning and alignment errors are accommodated since these errors can be substantial. Reconstructions of early-stage axolotl embryos were made from sets of 33 images. In a typical reconstruction, 781 points, each visible in at least three different views, were used to form 1511 triangles to represent the embryo surface. The resulting reconstruction had a mean radius of error of 0.27 pixels (1.1 μm). Mathematical properties of the reconstruction algorithm are identified and discussed