Removal and destruction of endocrine disrupting contaminants by adsorption with molecularly imprinted polymers followed by simultaneous extraction and phototreatment

This study presents a method to regenerate molecularly imprinted polymers (MIPs) used for the selective removal of endocrine disrupting compounds from aqueous effluents. Regeneration was based on solvent extraction under UV irradiation to regenerate the polymer and the solvent while destroying the contaminants. Acetone was selected as the best solvent for irradiation of estrone (E1), 17beta-estradiol (E2) and ethinylestradiol (EE2) using either UVC (254 nm) or UV-vis. A MIP synthesized with E2 as template was then tested for the extraction of this compound from a 2 microg/L loaded aqueous solution. E2 was recovered by 73+/-11% and 46+/-13% from the MIPs and a non-imprinted control polymer synthesized under the same conditions, respectively, after a single step elution with acetone. The irradiated polymers and acetone were reused for an additional extraction-regeneration cycle and showed no capacity decrease.     

Preliminary identification of potential markets for off-grid electrification: tool development and a case study of Ghana

With more than one billion people lacking access to electricity in the world, ensuring universal access to electricity by 2030 remains a major challenge which cannot be left to the government initiatives alone. Access to local information and identification of potential areas for investment can be a challenge for investors. This paper provides a tool for preliminary assessment of potential markets for off-grid electrification in developing countries and applies this to Ghana to demonstrate its applicability. A multi-criteria approach is used to rank the districts according to the overall potential and the best markets and least favourable areas for investment are identified. The tool offers flexibility to include new inputs to the analysis and the factor weights can be adjusted as appropriate. The case study shows that the tool can effectively identify potential areas from a list of candidates and offers support to analysts.     

A low-complexity audio fingerprinting technique for embedded applications

Multimedia Tools and Applications - This paper proposes a new optimized audio-based fingerprinting technology for embedded applications. The target use case is related to TV content synchronization...     

Interactions between trophoblast and uterine epithelium: monitoring of adhesive forces

At embryo implantation, it is postulated that the initial contact between blastocyst and maternal tissues is by adhesion of the trophoblast to the uterine epithelium. This cell-to-cell interaction is thought to be critical for implantation, although the actual adhesive forces have never been determined. In the present study, the atomic force microscope (AFM) was used to study the adhesion between human uterine epithelial cell lines (HEC-1-A; RL95-2) and human trophoblast-type cells (JAR). Specific interaction forces of these epithelia via their apical cell poles were determined on the basis of approach-and-separation cycles. For this purpose, the AFM tip was functionalized with JAR cells, then brought to the surface of uterine epithelial monolayers and was kept in contact for different periods of time (ms, 1, 10, 20, 40 min). The approach force curves displayed repulsive interactions for both HEC-1-A and RL95-2 cells. However, RL95-2 cells (with a smooth surface structure and a thin glycocalyx) showed lower values of the repulsive regime than HEC-1-A cells (with a rough surface structure and a thick glycocalyx). After having overcome repulsive interactions, the initial contact was followed by adhesive interactions. For contact times of 20 and 40 min, RL95-2 cells, but not HEC-1-A cells, showed specific JAR binding, i.e. the separation force curves displayed repeated rupture events in the range of 1-3 nN with a distance between 7-15 microm and, thereafter, a final rupture event at a distance of up to 45 microm. These features point to the formation of strong cell-to-cell bonds. Collectively, these studies provide the first definition of interaction forces between the trophoblast and the uterine epithelium, and are consistent with the hypothesis that an RL95-2-like architecture of uterine epithelial cells, i.e. an non-polarized phenotype, is essential for apical adhesiveness for the human trophoblast.     

Multidimensional characterization,Landau levels and Density of States in epitaxial graphene grown on SiC substrates

Using high-temperature annealing conditions with a graphite cap covering the C-face of, both, on axis and 8° off-axis 4H-SiC samples, large and homogeneous single epitaxial graphene layers have been grown. Raman spectroscopy shows evidence of the almost free-standing character of these monolayer graphene sheets, which was confirmed by magneto-transport measurements. On the best samples, we find a moderate p-type doping, a high-carrier mobility and resolve the half-integer quantum Hall effect typical of high-quality graphene samples. A rough estimation of the density of states is given from temperature measurements.     

The development of a silica nanoparticle-based label-free DNA biosensor

A silica nanoparticle-based DNA biosensor capable of detecting Bacillus anthracis bacteria through the use of unlabelled ss-oligonucleotides has been developed. The biosensor makes use of the optical changes that accompany a nanoparticle-immobilized cationic conjugated polymer (polythiophene) interacting with single-stranded vs. hybridized oligonucleotides, where a fluorescence signal appears only when hybridized DNA is present (i.e. only when the ss-oligonucleotide interacting with the polymer has hybridized with its complement). In order to enhance the sensitivity of the biosensor, two different nanoparticle architectures were developed and used to elucidate how the presence of neighboring fluorophores on the nanoparticle surface affects F?rster-resonant energy transfer (FRET) between the polythiophene/oligonucleotide complex (FRET donor) and the fluorophores (FRET acceptors). We demonstrate that the silica nanoparticle-based FRET platform lowers the limit of detection at least 10-fold in comparison to the polythiophene itself, and allows the detection of ～2 × 10(-12) moles of ss-oligonucleotide in a 100 μL sample with a standard fluorimeter (i.e. has a limit of detection of ～2 nM ssDNA). Such nanoparticle-based biosensor platforms are beneficial because of the robustness and stability inherent to their covalent assembly and they provide a valuable new tool that may allow for the sensitive, label-free detection (the target DNA that produces the fluorescence signal is unlabelled) without the use of polymerase chain reaction.     

Mesoscopic Monte Carlo simulations of interfacial films in ZnO-Bi2O3 ceramics

This paper reports mesoscopic Monte Carlo simulations (in which a ‘mesoscopic particle’ corresponds to a group of atoms or molecules) of interfacial films in ZnO-Bi₂O₃ binary ceramics. We observe the formation of Bi₂O₃-rich interfacial phases at the surface of ZnO grains (surface amorphous films) or at the grain-boundary between ZnO grains (intergranular films). In qualitative agreement with the experimental results reported on premelting of ceramics, the thickness of these films increases as the temperature increases up to the eutectic temperature. Moreover, the Bi₂O₃ concentration in the surficial or intergranular films is found to be larger than in the bulk. These surficial films exhibit both some layering and lateral ordering.     

Iron oxide magnetic nanoparticles used as probing agents to study the nanostructure of mixed self-assembled monolayers

Self-assembled monolayers (SAMs) of organic molecules are of exceptional technological importance since they represent a convenient, flexible, and simple system for tuning the chemical and physical properties of surfaces. The fine control of surface properties is directly dependent on the structure of mixed SAMs which is difficult to characterize at the nanoscale with usual techniques such as scanning probe microscopies. In this study, we report on a general method to investigate at the nanoscale the structure of molecular patterns which consist in SAMs of two components. Iron oxide nanoparticles (NPs) have been used as probing agents to study indirectly the structure of mixed SAMs. Mixed SAMs were prepared by the replacement of mercaptododecane (MDD) adsorbed by mercaptoundecanoic acid (MUA) molecules on gold substrates. Therefore, the SAM surface displays both chelating carboxylic terminal groups and non-chelating methylene terminal groups. As NPs have been previously demonstrated to specifically interact with carboxylic acid groups, the increasing density in NPs was correlated with the evolution of the COOH/CH(3) terminal groups ratio. Therefore the structure of mixed SAMs was studied indirectly as well as the kinetic of the replacement reaction and its mechanism. With this aim, we took advantage of the SPR properties of the gold substrate and of the high refractive index of iron oxide nanoparticles to follow their assembling on mixed SAMs as a time resolved study. The high sensitivity and tuning of the SPR signal over a wide range of wavelengths are correlated with the NP density. Furthermore, SEM combined with image analysis has allowed studying the replacement rate of MDD by MUA in SAMs. We took also advantages of the magnetic properties of NPs to evaluate qualitatively the replacement of thiol molecules.     

Effect of the plant waste onto the properties of use and the microstructure of phyllosilicates based ceramics

The present study aimed at using plant waste (Musa Paradisiaca) for manufacturing clay-based ceramics in order to promote lower sintering temperature while preserving the properties of use. Two kaolinic-illitic clays (NZ1 and KO) from Central African Republic were used mixed with 1 to 10 mass% of the plant waste (MP). The clays and the waste exhibited accessory phases: quartz and iron oxides, and K₂O respectively. MP was collected, dried and sieved (<100 μm) previously to its mixture with clays. According to the sintering behavior of KO and NZ1 derived from thermodilatometry, the densification was obtained after firing at 1200°C. Results showed that open porosity decreased from 35% to 17% with increasing temperature in the range 900 to 1200°C for KO and NZ1. This porosity remained in the range 30%-40% while increasing the MP content (firing at 1000°C for 1h.). The optimized MP content was 3 and 5 mass% for KO and NZ1 clay materials respectively. The compressive strength and thermal conductivities were improved compared to clay samples without MP fired at 1200°C. Moreover a significant decrease in the sintering temperature was achieved, leading to energy saving in line with sustainability issues.