Complex Phase Equilibria in Refractories Design and Use

The current applications of phase diagrams and thermodynamic calculations to studies of refractories are reviewed highlighting links to microstructural analyses. Improved understanding of microstructural evolution and chemical corrosion mechanisms has resulted from such work. The limitation of the calculations/diagrams to thermodynamic equilibria has led to imaginative attempts to incorporate some dynamic aspect in them so they are more relevant to practical conditions. These include varying temperature to model a temperature gradient, P _O2 to model atmosphere permeation into a brick, slag/refractory ratio to model slag penetration and altering the slag composition after reaction with the fine matrix phases. The potential future development of such techniques is discussed.     

Synthesis and characterization of maltose fatty acid monoesters as biosurfactants

Maltose long-chain fatty acid esters (MFAE), esterified at the 6 and 6′ position, were synthesized with stearic, palmitic, myristic, and oleic groups. Synthesis yields were 15–20% based on initial maltose present, and structural confirmation was obtained using plasma desorption mass spectrometry and nuclear magnetic resonance spectroscopy. These surfactants have surface tensions in the range of 34–36 dyn/cm at their critical micelle concentrations (CMC) of approximately 10⁻⁵–10⁻⁶ mol/L. The increased chain lengths have a marked effect, reducing CMC values for MFAE by approximately three orders of magnitude over similar carbohydrate-based dodecyl chain sources. Within chain lengths between 14 and 18 carbons, the rate of change in CMC is significant and decreases with increasing chain length for MFAE. The melting points of MFAE are approximately 40°C, and the heat capacities range from 1.6 to 1.9 J/g·K. These numbers are comparable to those of sucrose esters, indicating their applicability in similar uses. However, because MFAE, unlike sucrose, possess an anomeric carbohydrate carbon position, these surfactants maintain their reducing nature and are susceptible to further derivatization. They are also synthesized from renewable, economical carbohydrates and lipids and may provide an excellent alternative to pertrochemical-derived products.     

Electrochimie du polynitrure de soufre dans les solvants non aqueux—I. Comportement dans l'acetonitrile

The electrochemical behaviour of polysulphur nitride was studied by cyclic voltametry in alkaline and silver salt acetonitrile solutions. In an alkaline salt solution during the cathodic polarization, superficial degradation of (SN)_x probably gives S₇N^? ions. In a silver perchlorate solution silver deposition was observed. It can be dissolved anodically. During the first anodic polarization, oxidation pic occurs. The quantity of electricity involved during this reaction is a function of the association constant of the electrolyte.     

Thermal decomposition behavior of poly[3,3-bis(ethoxymethyl) oxetane] and related polyethers

The thermal decomposition behavior of poly[3,3-bis(ethoxymethyl)oxetane] (polyBEMO) was examined and compared to the decomposition of poly(ethylene oxide) (PEO) and poly(tetramethylene oxide) (polyTHF). Differential scanning calorimetric (DSC) studies as a function of heating rates and at constant temperature as a function of time yielded activation energies of 45–50 kcal/mol, characteristic of polyether decomposition. First-order decomposition kinetics were found. The reaction is endothermic, with a heat of decomposition of 18.6 kcal/mol. Effusion mass spectroscopy on polyBEMO showed major peaks at 112, 140, 168, and 174 amu. A mechanism is proposed in which the thermal scission of the ether bonds in both the polymer chain and in the appendanges initiates the decomposition. The main decomposition reaction for polyBEMO can be written as where the appendages and main chain are cleaved in an unknown order.     

Adaptive output-feedback stabilization of non-local hyperbolic PDEs

We address the problem of adaptive output-feedback stabilization of general first-order hyperbolic partial integro-differential equations (PIDE). Such systems are also referred to as PDEs with non-local (in space) terms. We apply control at one boundary, take measurements on the other boundary, and allow the system’s functional coefficients to be unknown. To deal with the absence of both full-state measurement and parameter knowledge, we introduce a pre-transformation (which happens to be based on backstepping) of the system into an observer canonical form. In that form, the problem of adaptive observer design becomes tractable. Both the parameter estimator and the control law employ only the input and output signals (and their histories over one unit of time). Prior to presenting the adaptive design, we present the non-adaptive/baseline controller, which is novel in its own right and facilitates the understanding of the more complex, adaptive system. The parameter estimator is of the gradient type, based on a parametric model in the form of an integral equation relating delayed values of the input and output. For the closed-loop system we establish boundedness of all signals, pointwise in space and time, and convergence of the PDE state to zero pointwise in space. We illustrate our result with a simulation.     

Towards a distributed multi-agent framework for shared resources scheduling

Nowadays, manufacturers have to share some of their resources with partners due to the competitive economic environment. The management of the availability periods of shared resources causes a problem because it is achieved by the scheduling systems, which assume a local environment where all resources are on the same site. Therefore, distributed scheduling with shared resources is an important research topic. In this communication, we introduce the architecture and behaviour of DSCEP framework (Distributed, Supervisor, Customer, Environment, and Producer) under shared resources situation with disturbances. We are using a simple example of manufacturing system to illustrate the ability of DSCEP framework to solve the shared resources scheduling problem in complex systems.     

Physiological and behavioral effects of coniferyl benzoate on avian reproduction

Various plant secondary metabolites related to cinnamic acid are of interest because of their repellency to birds and their occurrence in ecologically important food items. Coniferyl benzoate (CB), a phenylpropanoid ester that occurs in quaking aspen (Populus tremuloides) is of particular ecological interest because of its effect on ruffed grouse (Bonasa umbellus) feeding behavior and its possible influence on the population dynamics of this bird. During detoxification processes, CB and other analogous compounds are metabolized into by-products, such as ferulic acid (FA), that can cause anti-reproductive effects. We tested whether consumption of CB produces antire-productive effects similar to FA using male and female Japanese quail (Coturnix coturnix) as avian models for ruffed grouse. The parameters we investigated included: the production, morphology, and development of eggs; reproductive characteristics influenced by estrogen; serum prolactin levels; and male reproductive behavior. Dietary CB did not produce antireproductive effects similar to FA at intake levels that Japanese quail and ruffed grouse would freely consume. Consumption of CB by Japanese quail significantly reduced egg production and body mass but did not affect male reproductive performance. Coniferyl benzoate's effect on egg production may be explained by lower energy acquisition and retention rather than endocrine changes per se. Contrary to previous reports, it is unlikely that FA, or similar compounds act directly as estrogen mimics or antagonists. Although, CB did reduce egg production in quail, it is unlikely that it would affect egg production in wild ruffed grouse. Detoxification costs and the effects of CB on nutrient utilization may explain why ruffed grouse avoid high dietary levels of CB.     

Polymer compatibility III. The system poly(methyl methacrylate)–poly(vinyl acetate). Characterization studies

Blends of poly(methyl methacrylate) (PMMA) and poly(vinyl acetate) (PVAc) were prepared by mixing the polymers in the melt and in the absence of a solvent. PMMA was the major constituent of the blend. The polymer blends were tested, using various methods, to determine if they are compatible as solids. Data obtained from dynamic mechanical and DSC measurements show that, when they are mixed under given Brabender mix conditions, the blends exhibit properties characteristic of polymer pairs compatible as solids. If the mix conditions are altered, a two-phase system is evidenced. Using micrographs obtained by light microscopy in phase contrast as criteria, two companion blends containing PMMA/PVAc 80/20 would be classified as incompatible as solids because of the differences in refractive index of PMMA and PVAc. The micrographs also show that, in the system that would otherwise be listed as compatible, the PVAc domains appear to be relatively uniform in size and distribution through the PMMA matrix. In its companion blend, large, irregularly shaped particles of PVAc which are poorly dispersed in the PMMA matrix are evident.     

Synthesis of polymer materials for use as cell culture substrates

Up to today, several techniques have been used to maintain cells in culture for studying many aspects of cell biology and physiology. More often, cell culture is dependent on proper anchorage of cells to the growth surface. Thus, poly-l-lysine, fibronectin or laminin are the most commonly used substrates. In this study, electrosynthesized biocompatible polymer films are proposed as an alternative to these standard substrates. The electrosynthesized polymers tested were polyethylenimine, polypropylenimine and polypyrrole. Then, the adhesion, proliferation and morphology of rat neuronal cell lines were investigated on these polymer substrates in an attempt to develop new and efficient polymer materials for cell culture. During their growth on the polymers, the evolution of the cell morphology was monitored using both confocal microscopy and immunohistochemistry, leading to the conclusion of a normal development. An estimation of the adhesion and proliferation rates of rat neuronal cell cultures indicated that polyethylenimine and polypropylenimine were the best substrates for culturing olfactory neuronal cells. A method to favour the differentiation of the neuronal cells was also developed since the final aim of this work is to develop a biosensor for odour detection using differentiated neuronal cells as transducers. Consequently, a biosensor was microfabricated using silicon technology. This microsystem allowed us to culture the cells on a silicon wafer and to position the cells on certain parts of the silicon wafer.