Polymer waste recycling over “used” catalysts

Catalytic degradation of high-density polyethylene (HDPE) was carried out under nitrogen using a laboratory fluidised bed reactor operating at 360 °C with catalyst to polymer feed ratio of 2:1 and at 450 °C with catalyst to polymer feed ratio of 6:1 under atmospheric pressure. The catalysts used in this study were ZSM-5, US-Y, ASA, fresh FCC (fluid catalytic cracking) commercial catalyst (Cat-A) and equilibrium FCC catalysts with different levels of metal poisoning were studied. The initial results for polymer degradation at 360 °C (catalyst to polymer ratio of 2:1) in a fluidised bed reactor in terms of the yield of volatile hydrocarbon products were: model catalysts>commercial FCC catalyst>E-Cats. However, when the process conditions more closely resembled to FCC conditions, the fresh commercial FCC catalyst was more favourable in terms of the yield of volatile hydrocarbon products. The degradation of HDPE over E-Cats although reduced was similar to ASA in product selectivity and yield, and the level of metal contamination did not affect the product stream generated. A simple economic evaluation of polymer recycling process is reported showing that a catalytic system based on E-Cats appears comparable in costs to a commercial thermal cracking plant.     

Large-scale in vivo synthesis of the carbohydrate moieties of gangliosides GM1 and GM2 by metabolically engineered Escherichia coli

Two metabolically engineered Escherichia coli strains have been constructed to produce the carbohydrate moieties of gangliosides GM2 (GalNAcbeta-4(NeuAcalpha-3)Galbeta-4Glc; Gal = galactose, Glc = glucose, Ac = acetyl) and GM1 (Galbeta-3GalNAcbeta-4(NeuAcalpha-3)Galbeta-4Glc. The GM2 oligosaccharide-producing strain TA02 was devoid of both beta-galactosidase and sialic acid aldolase activities and overexpressed the genes for CMP-NeuAc synthase (CMP = cytidine monophosphate), alpha-2,3-sialyltransferase, UDP-GlcNAc (UDP = uridine diphosphate) C4 epimerase, and beta-1,4-GalNAc transferase. When this strain was cultivated on glycerol, exogenously added lactose and sialic acid were shown to be actively internalized into the cytoplasm and converted into GM2 oligosaccharide. The in vivo synthesis of GM1 oligosaccharide was achieved by taking a similar approach but using strain TA05, which additionally overexpressed the gene for beta-1,3-galactosyltransferase. In high-cell-density cultures, the production yields for the GM2 and GM1 oligosaccharides were 1.25 g L(-1) and 0.89 g L(-1), respectively.     

Synthesis and characterization of cleavable surfactants derived from poly(ethylene glycol) monomethyl ether

A series of noncyclic acetal-linked cleavable surfactants were simply prepared by condensation of aldehydes with poly(ethylene glycol) monomethyl ethers. All of the products were characterized by¹H nuclear magnetic resonance. Their hydrophile-lipophile balance, surface tension, cloud point, critical micelle concentration, and foam height were determined. Hydrolysis kinetic studies, followed by gas chromatography, showed that they had higher hydrolytic reactivity in acidic solution than cyclic acetal-linked cleavable surfactants.     

Curing process of powdered phenol–formaldehyde resol resins and the role of water in the curing systems

The curing behavior of two kinds of commercial powdered resol phenolic resins was studied by differential scanning calorimetry. Liquid‐state ¹³C‐NMR spectroscopy was used to aid in understanding the curing behavior by detecting the structure of powdered resins. The reaction mechanism was interpreted with the dependency of activation energy on the degree of conversion. The results indicate that there are differences in the curing mechanism between core and face phenolic resins. The curing process of core resin was faster than that of face resin at the same reaction temperature. The water added in the curing system played an important role of plasticizer or diluent according to different curing stages and water content. In the initial curing stage, water mainly diluted the system and retarded the curing reactions. However, at the higher degrees of conversion, water played the role of plasticizer to decrease the effect of diffusion on the curing reactions to make the curing reactions more complete. The excess water added in the curing system played the role of diluent at almost all stages during the curing process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1371–1378, 2003     

Methods for the determination of cyclopropenoid fatty acids. VII. The dilution-HBr-titration technique as a general method

The stepwise HBr titration method for the cyclopropenoid analysis of cottonseed oils is subject to serious inaccuracies when applied to samples containing higher cyclopropenoid concentrations, particularly if they contain appreciable amounts of alumina-adsorbable materials. A modification of the method is described which eliminates these sources of error. Its validity has been established by the analysis of a wide range of synthetic compositions including compositions containing massive amounts of interfering HBr-reactive substances and other alumina-adsorbable materials. The method with further modification can be used to analyze glycerides with the same high degree of accuracy. Presented at the AOCS Meeting in Houston, April 1965. So. Utiliz. Res. Dev. Div., ARS, USDA.     

Ohmic contacts to semiconducting diamond using a Ti/Pt/Au trilayer metallization scheme

Ohmic contacts have been fabricated on a naturally occurring type IIb diamond crystal using an annealed Ti/Pt/Au trilayer metallization where the Pt served successfully as a barrier to Ti diffusion into the Au capping layer. However, a specific contact resistance could not be reliably determined using transmission line model measurements. Auger microanalysis revealed the presence of Ti on the diamond surface near the ohmic contact pads. The most likely origin of the Ti on the diamond surface was determined to be lateral diffusion from beneath the contact pads. This would have produced a nonuniform concentration of Ti across the diamond surface which, in turn, would have affected the diamond sheet resistance in a complicated way.     

Solubilization—A micellar phenomenon

Summary The ability of dilute surfactant solutions to solubilize water-insoluble substances to form stable systems is termed solubilization. Reviewed are the mechanism, methods for measurement, and temperature effect. Discussed in detail are surfactant structure and solubilizates, and the principles of solubilization involved. The application of solubilization to detergency operations is discussed broadly. It is concluded that solubilization is a minor, difficultly measurable factor in the large majority of aqueous cleaning operations.     

Détermination de constantes cinétiques du craquage catalytique par la modélisation du test de microactivité (MAT)

The microactivity test (MAT) for cracking catalyst test works with an approximately plug flow isothermal reactor. The yields at the outlet of such a reactor is numerically computed in the case of lumped kinetic with large molecular expansion and rapid catalyst deactivation expressed versus poison concentration. The poison (coke in cracking reaction) is considered as a product formed by several reaction routes. The results are applied to catalytic cracking kinetic with a four lump model (feedstock, gasoline, gas, coke). The comparison between experimental and computed yields, permits the adjustment of kinetic constants with a set of experimental results obtained from a laboratory scale reactor derived from the MAT. The simulation of concentration profile in the reactor permits a better understanding of the reaction courses.