New potential for preparation of performing h-BN coatings via polymer pyrolysis in RTA furnace

An innovative IR irradiation annealing process is used to increase the crystallization ratio of hexagonal boron nitride (h-BN) coatings on pure titanium pellets. Since the polymer pyrolysis route requires heating the green polymer at high temperature to convert it into a ceramic, the use of IR radiation furnace (compared to a resistive furnace) allows achievement of better crystallized h-BN while the substrate remains at relatively low temperature (<1000 °C). Annealing treatments have been performed under argon or nitrogen using either a halogen lamp or a Rapid Thermal Annealing (RTA) furnace. Advanced structural and chemical characterizations have shown a good chemical stability of the coatings. In addition, it has been revealed that samples annealed under Ar present a micro-composite structure at the interphase composed of a μ-layer of TiB₂/TiB/Ti(N)_x between the coating and the substrate, whereas samples annealed under nitrogen display a simpler structure at the interphase, with only TiN.     

Chemical inhibitors when timing is critical: a pharmacological concept for the maturation of T cell contacts

Cellular signal transduction proceeds through a complex network of molecular interactions and enzymatic activities. The timing of these molecular events is critical for the propagation of a signal and the generation of a specific cellular response. To define the timing of signalling events, we introduce the combination of high-resolution confocal microscopy with the application of small-molecule inhibitors at various stages of signal transduction in T cells. Inhibitors of Src-family tyrosine kinases and actin dynamics were employed to dissect the role of the lymphocyte-specific tyrosine kinase Lck in the formation and maintenance of T cell receptor/CD3-dependent contacts. Anti-CD3epsilon-coated coverslips served as a highly defined stimulus. The kinetics of the recruitment of the yellow fluorescent protein-tagged signalling protein ZAP-70 were detected by high-resolution confocal microscopy. The analysis revealed that at 5 min after receptor engagement, Lck activity was required for maintenance of contacts. In contrast, after 20 min of receptor engagement, the contacts were Lck-independent. The relevance of the timing of inhibitor application provides a pharmacological concept for the maturation of T cell-substrate contacts.     

Cytostatic activity of 1,10-phenanthroline derivatives generated by the clip-phen strategy

The cytostatic activities of a series of twelve 1,10-phenanthroline (Phen) derivatives and of their copper complexes were studied on L1210 murine leukemia cells. Large increases in the biological activity were observed for compounds of the 3-Clip-Phen series, in which two Phen moieties were bridged at their C3 positions by an alkoxy linker, the 3-pentyl-Clip-Phen derivative showing an IC(50) value of 130 nM while Phen shows an IC(50) value of 2500 nM under the same conditions. IC(50) values seemed to be modulated not only by the position, the nature, and the length of the linker of Clip-Phen but also by hydrophobicity. Since copper complexes of Phen are chemical nucleases and nucleic acids are thus a potential target for these compounds, the corresponding copper complexes were also studied. Copper complexation of the 3-Clip-Phen ligands did not increase their biological activities. Attempts to vectorize 3-Clip-Phen derivatives with a DNA binder such as spermine or with a cell-penetration peptide failed to increase their biological activity relative to the original 3-Clip-Phen series.     

Biochemical,functional, and histochemical effects of essential fatty acid deficiency in rat kidney

The present study was designed to examine the effects of EFA deficiency (EFAD) on biochemical, functional, and structural aspects of the kidney in growing and adult rats fed a normal or EFAD diet for 9 wk after weaning. Food and fluid intake (FI), urine volume, and Na⁺ and K⁺ excretions were measured weekly from weeks 4 to 8 by placing the rats in individual metabolic cages for 24 h. At week 9, Li⁺ and a 5% water load, respectively, were administered at 14 and 1.5 h prior to glomerular and proximal tubular function studies, as assessed by 3-h creatinine (C_Cr) and Li⁺ (C_Li+) clearances. Hematocrit and urine volume; serum and urine [Cr], [Li⁺], [Na⁺], and [K⁺]; and renal FA distribution were also measured. Data [corrected to 100 g/body weight (bw) and presented as means ±SEM] were significant, at P<-0.05. Despite a similar ingestion of solids from weeks 4 to 7 (weeks 7 to 10 of life), the rats on the EFAD diet showed a decreased body weight from week 5. From weeks 4 to 8, Fl and urine volume were similar for both groups, but the Fl increased at week 6 in the EFAD group; 24-h Na⁺ and K⁺ excretions were similar at all weeks, except for an increase in the EFAD group for both ions at week 7. In the EFAD group, C_Cr and C_Li+ decreased by 27 and 56.3%, respectively (385.7±33.4 vs. 280±21.1, and 21.0±2.1 vs. 9.2±1.1 μL/min/100 g; n=9 vs. 10), the latter result suggesting increased proximal reabsorption. The 3-h Na⁺ and K⁺ excretions were similar, but the Li⁺ decreased (0.78±0.06×10⁻² vs. 0.32±0.03×10⁻² μeq/min/100 g) in the EFAD group, giving additional support to the suggestion. Renal structure was normal and similar for both groups, but the EFAD group showed a more prominent proximal tubule brush border, together with heavier periodic acid-Schiff staining in all specimens from weeks 5 to 9. In the EFAD group, FA of the n−9 and n−7 series were higher, but most of the n−6 series were lower as a percentage of total lipids in the medulla and cortex. Medullary levels of 20∶4n−6 were maintained, 22∶4n−6 declined twice, arachidonic acid was maintained, and 20∶5n−3 was lower. The EFAD diet affected glomerular function, proximal tubular structure and function, and FA distribution in the rat kidney.     

Molecular Networking for Drug Toxicities Studies: The Case of Hydroxychloroquine in COVID-19 Patients

Using drugs to treat COVID-19 symptoms may induce adverse effects and modify patient outcomes. These adverse events may be further aggravated in obese patients, who often present different illnesses such as metabolic-associated fatty liver disease. In Rennes University Hospital, several drug such as hydroxychloroquine (HCQ) have been used in the clinical trial HARMONICOV to treat COVID-19 patients, including obese patients. The aim of this study is to determine whether HCQ metabolism and hepatotoxicity are worsened in obese patients using an in vivo/in vitro approach. Liquid chromatography high resolution mass spectrometry in combination with untargeted screening and molecular networking were employed to study drug metabolism in vivo (patient’s plasma) and in vitro (HepaRG cells and RPTEC cells). In addition, HepaRG cells model were used to reproduce pathophysiological features of obese patient metabolism, i.e., in the condition of hepatic steatosis. The metabolic signature of HCQ was modified in HepaRG cells cultured under a steatosis condition and a new metabolite was detected (carboxychloroquine). The RPTEC model was found to produce only one metabolite. A higher cytotoxicity of HCQ was observed in HepaRG cells exposed to exogenous fatty acids, while neutral lipid accumulation (steatosis) was further enhanced in these cells. These in vitro data were compared with the biological parameters of 17 COVID-19 patients treated with HCQ included in the HARMONICOV cohort. Overall, our data suggest that steatosis may be a risk factor for altered drug metabolism and possibly toxicity of HCQ.     

Enhancing laccase stability and activity for dyes decolorization using ZIF-8@MWCNT nanocomposite

The continuous use of chemical dyes in various industries, and their discharge into industrial effluents, results in severe problems to human life and water pollution. Laccases have the ability to decolorize dyes and toxic chemicals in industrial effluents as green biocatalysts. Their possible industrial applications have been limited by poor reusability, low stability, and loss of free laccase action. In this research, laccase was immobilized on zeolitic imidazolate framework coated multi-walled carbon nanotubes (Laccase@ZIF-8@MWCNTs) via metal affinity adsorption to develop an easy separable and stable enzyme. The optimum reaction conditions for immobilized laccase are at a pH of 3.0 and a temperature of 60?℃. The immobilized laccase was enhanced in storage and thermal stability. The results indicated that Laccase@ZIF-8@MWCNTs still maintained 68% of its original activity after 10 times of repeated use. Most importantly, the biocatalytic system was applied for decolorization of different dyes (20?mg·L^?1) without a mediator, and up to 97.4% for Eriochrome black T and 95.6% Acid red 88 was achieved in 25 min. Biocatalysts with these properties may be used in a variety of environmental and industrial applications.     

Effects of the nature of the doping salt and of the thermal pre-treatment and sintering temperature on Spark Plasma Sintering of transparent alumina

A slurry of α-Al₂O₃ was doped with Mg, Zr and La nitrates or chlorides, in various amounts in the range 150-500 wt ppm and then freeze-dried to produce nanosized doped powder (∼150 nm). The powder was sintered by SPS to yield transparent polycrystalline alpha alumina. The influence of the nature of the doping element and the starting salt, the thermal treatment before sintering and the sintering temperature on the transparency of the ceramics were investigated. The transparency of the ceramics of nanosized Al₂O₃ was shown to depend mainly on the way the powder was prepared, the nature of the doping salt also had an effect. Finally, a high real inline transmittance, reaching 48.1% was achieved after optimization.     

Direct-writing of PbS nanoparticles inside transparent porous silica monoliths using pulsed femtosecond laser irradiation

Pulsed femtosecond laser irradiation at low repetition rate, without any annealing, has been used to localize the growth of PbS nanoparticles, for the first time, inside a transparent porous silica matrix prepared by a sol-gel route. Before the irradiation, the porous silica host has been soaked within a solution containing PbS precursors. The effect of the incident laser power on the particle size was studied. X-ray diffraction was used to identify the PbS crystallites inside the irradiated areas and to estimate the average particle size. The localized laser irradiation led to PbS crystallite size ranging between 4 and 8 nm, depending on the incident femtosecond laser power. The optical properties of the obtained PbS-silica nanocomposites have been investigated using absorption and photoluminescence spectroscopies. Finally, the stability of PbS nanoparticles embedded inside the host matrices has been followed as a function of time, and it has been shown that this stability depends on the nanoparticle mean size.     

Synthesis and Surface-Active Properties of Uronic Amide Derivatives,Surfactants from Renewable Organic Raw Materials

Short chemical syntheses were developed to produce a new set of surfactants from uronic acids derived from widely available raw materials. Three different strategies were used to synthesize uronic amide derivatives, the structures of which were totally characterized by spectrometric methods (IR, MS, ¹H-RMN and ¹³C-RMN). The best one, using an acid chloride as the synthetic intermediate, furnished the expected amides as a mixture of anomers in 46–58% global yield. Surface-active properties (CMC, γ_cmc, Γ_max, A _min) of homologous series of uronic acid N-alkylamides from C8 to C18 were also assessed. In general, these sugar-based surfactants exhibited good surface-activities, and appeared as valuable nonionic surfactants compared to octylphenol 9–10 ethylene oxide condensate, the most well-known nonionic surfactant. Increasing the alkyl chain length influenced the CMC values for both glucuronic and galacturonic N-alkylamide derivatives. The galacturonic N-alkylamides decreased γ_cmc at slower values than their counterpart’s glucuronic N-alkylamides.     

Effect of addition of nanosized UV absorbers on the physico-mechanical and thermal properties of an exterior waterborne stain for wood

This study describes the effects of the addition of inorganic nanosized UV absorbers on physico-mechanical and thermal properties of an exterior commercial acrylic-based waterborne stain for wood. Electronic microscopy and water vapor (WV) permeability measurements were performed to characterize the free films of the acrylic stain and resulting nanocomposite coatings. An accelerated weathering method was used to evaluate aging behavior of the coatings on wood through appearance, T_g, abrasion resistance, adhesion strength, hardness and Young's modulus changes. In addition to improving the protection against UV, the doped TiO₂ and silica-coated ZnO nanoparticles in powder form have improved the abrasion resistance and barrier effect against water vapor diffusion of the acrylic stain. For most of nanocomposite coatings, the addition of ZnO hydrophilic nanoparticles in predispersed form has resulted in a decrease in WV permeability, while the adhesion strength and abrasion resistance of those coatings were negatively affected. The addition of ZnO nanoparticles has decreased the T_g of the acrylic stain. Finally, the accelerated weathering has induced an increase in T_g, hardness, Young's modulus (stiffness) and an increase in apparent adhesion strength and abrasion resistance of the coatings. The T_g values of the aged nanocomposite coatings were lower than that of unmodified acrylic stain.