A comparison of noninvasive reconstruction of epicardial versus transmembrane potentials in consideration of the null space

We compare two source formulations for the electrocardiographic forward problem in consideration of their implications for regularizing the ill-posed inverse problem. The established epicardial potential source model is compared with a bidomain-theory-based transmembrane potential source formulation. The epicardial source approach is extended to the whole heart surface including the endocardial surfaces. We introduce the concept of the numerical null and signal space to draw attention to the problems associated with the nonuniqueness of the inverse solution and show that reconstruction of null-space components is an important issue for physiologically meaningful inverse solutions. Both formulations were tested with simulated data generated with an anisotropic heart model and with clinically measured data of two patients. A linear and a recently proposed quasi-linear inverse algorithm were applied for reconstructions of the epicardial and transmembrane potential, respectively. A direct comparison of both formulations was performed in terms of computed activation times. We found the transmembrane potential-based formulation is a more promising source formulation as stronger regularization by incorporation of biophysical a priori information is permitted.     

The role of photon statistics in fluorescence anisotropy imaging.

Anisotropy imaging can be used to image resonance energy transfer between pairs of identical fluorophores and, thus, constitutes a powerful tool for monitoring protein homo-association in living single cells. The requirement for only a single fluorophore significantly simplifies biological preparation and interpretation. We use quantitative methods for the acquisition and image processing of anisotropy data that return the expected error of the anisotropy per pixel based on photon statistics. The analysis methods include calibration procedures and allow for a balance in spatial, anisotropy, and temporal resolution. They are featured here with anisotropy images of fluorescent calibration beads and enhanced green fluorescent protein complexes in live cells.     

Topology control for fault-tolerant communication in wireless ad hoc networks

Fault-tolerant communication and energy efficiency are important requirements for future-generation wireless ad hoc networks, which are increasingly being considered also for critical application domains like embedded systems in automotive and aerospace. Topology control, which enables multi-hop communication between any two network nodes via a suitably constructed overlay network, is the primary target for increasing connectivity and saving energy here. In this paper, we present a fault-tolerant distributed topology control algorithm that constructs and continuously maintains a k-regular and k-node-connected overlay for energy-efficient multi-hop communication. As a by-product, it also builds a hierarchy of clusters that reflects the node density in the network, with guaranteed and localized fault-tolerant communication between any pair of cluster members. The construction algorithm automatically adapts to a dynamically changing environment, is guaranteed to converge, and exhibits good performance as well.     

Fractal fragmentation of rocks within sturzstroms: insight derived from physical experiments within the ETH geotechnical drum centrifuge

An investigation of the behaviour and energy budget of sturzstroms has been carried out using physical, analytical and numerical modelling techniques. Sturzstroms are rock slides of very large volume and extreme run out, which display intensive fragmentation of blocks of rock due to inter-particle collisions within a collisional flow. Results from centrifugal model experiments provide strong arguments to allow the micro-mechanics and energy budget of sturzstroms to be described quantitatively by a fractal comminution model. A numerical experiment using a distinct element method (DEM) indicates rock mass and boundary conditions, which allow an alternating fragmenting and dilating dispersive regime to evolve and to sustain for long enough to replicate the spreading and run out of sturzstroms without needing to resort to peculiar mechanism. The fragmenting spreading model supported here is able to explain the run out of a fluid-absent granular flow beyond the travel distance predicted by a Coulomb frictional sliding model. This, and its strong relation to internal fragmentation, suggests that a sturzstrom constitutes a landslide category of its own. This study provides a novel framework for the understanding the physics of such sturzstroms.     

Solid-phase epitaxy of undoped amorphous silicon by in-situ postannealing

The solid phase epitaxy (SPE) of undoped amorphous Si (a-Si) deposited on SiO₂ patterned Si(001) wafers by reduced pressure chemical vapor deposition (RPCVD) using a H₂-Si₂H₆ gas system was investigated. The SPE was performed by applying in-situ postannealing directly after deposition process. By transmission electron microscopy (TEM) and scanning electron microscopy, we studied the lateral SPE (L-SPE) length on sidewall and mask for various postannealing times, temperatures and a-Si thicknesses. We observed an increase in L-SPE growth for longer postannealing times, temperatures and larger Si thicknesses on mask. TEM defect studies revealed that by SPE crystallized epi-Si exhibits a higher defect density on the mask than at the inside of the mask window. By introducing SiO₂-cap on the sample with 180 nm Si thickness following postannealing at 570 °C for 5 h, the crystallization of up to 450 nm epi-Si from a-Si is achieved. We demonstrated the possibility to use this technique for SiGe:C heterojunction bipolar transistor (HBT) base layer stack to crystallize Si-buffer layer to widen the monocrystalline region around the bipolar window and to improve base link resistivity of the HBT.     

p‐TCOs für Transparente Elektronik

p‐type TCOs for use in transparent electronics In this article, a new type of semiconducting material is introduced. Transparent conducting thin films are already established in our everydaylife. But the type of these so‐called ?TCOs”? is dominated by electron transport, that means they are n‐type. To get transparent p‐n‐junctions and therefore transparent electronics, the missing part is a transparent p‐type material. Researchers all over the world have found different approach to produce this new generation of materials. At the Fraunhofer Institute for Surface Engineering and Thin Films (IST) in Braunschweig it is now possible to produce these kind of thin films as well.     

Die elastische Verformung der Walzen von Vierwalzengerüsten

Die Belastung der Stütz- und der Arbeitswalzen. Elastizitätstheoretische Analyse der Walzenverformung. Die Verschiebung der Walzen bei Lastsprüngen und bei geringer Ausdehnung der auf den Walzenballen wirkenden Belastung. Die Walzenverschiebung für eine über dem Walzenballen beliebig verteilte Belastung. Gleichungen zur Bestimmung der Lastverteilung zwischen Stütz- und Arbeitswalze und der Verschiebung der Arbeitswalze im Walzspalt. Einfluß des Lastsprunges an den Walzgutkanten auf die Walzspaltform und das Dickenprofil des Walzgutes.     

Studies on the sample weight for ochratoxin A determination in raw coffee

Ochratoxin A is a mycotoxin that may cause damage to the kidneys and the immune system in man. Foods are examined for this contaminant by the laboratories responsible for official food control. At present, there are no specific provisions for the sampling and examination of ochratoxin A in foods. Therefore, recourse is made to the provisions for aflatoxins. They prescribe the processing of samples with a weight of up to 30 kg. The examination of raw coffee for ochratoxin A in conjunction with the German Food Monitoring Programme of 2000 was undertaken with various sample weights (5, 10 and 30 kg) in order to identify the influence of the sample weight on the result. Overall, the sample weight did not have an effect on the detection and level of the ochratoxin A content in the samples of raw coffee examined.     

The effect of water temperature on the adsorption equilibrium of dissolved organic matter and atrazine on granular activated carbon

The influence of water temperature on the adsorption of natural dissolved organic matter (DOM) on activated carbon has not been investigated intensively yet. In this study, batch experiments with granular activated carbon (GAC) have been carried out at three temperatures (5 degrees C, 20 degrees C, 35 degrees C) using a humic acid model water and different types of surface water (lake, river, canal). Furthermore, the adsorption of an anthropogenic contaminant, atrazine, was quantified in the absence and presence of DOM. The results indicate a significant influence of water temperature on the adsorption equilibrium of DOM and atrazine. Contrary to expectations, DOM and atrazine adsorption in surface water tends to be increased with increasing water temperature, whereas the extent of this effect is dependent on the type and concentration of DOM. Furthermore, the temperature effect on atrazine adsorption is controlled by competition of DOM and atrazine on adsorption sites. Some assumptions are proposed and discussed for explaining the temperature effects observed in the batch studies.