Polyaniline doped with α, ω‐alkanedisulfonic acids: preparation and characterization

The use of α, ω‐alkanedisulfonic acid, HO₃S(CH₂)_nSO₃H (n = 1, 4, 6 and 12), as a dopant for polyaniline (PANi) was investigated. This series of disulfonic acids with varying chain lengths were synthesized and used in the doping of PANi. The doped polymers showed conductivity in the range 10^?2 to 10^?1 S cm^?1. Thermal studies showed that the doped polymers, depending on the chain length of α,ω‐alkanedisulfonic acid, were stable up to ca 300 °C and the thermal stability decreased with increasing dopant chain length. The thermal stability of α,ω‐alkanedisulfonic acid‐doped PANi was higher than that of alkanesulfonic acid‐doped PANi which typically degrades around 250 °C, suggesting a moderately broader processing window for α,ω‐alkanedisulfonic acid‐doped PANi for blending with other thermoplastics. Copyright © 2012 Society of Chemical Industry     

Efficient catalytic epoxidation of olefins with hierarchical mesoporous TS-1 using TBHP as an oxidant

A series of hierarchical mesoporous TS-1 zeolites with MFI structure were successfully synthesized via hydrothermal route using amphiphilic organosilanes as pore directing templates. These materials were characterized by nitrogen sorption (for surface area, pore volume and pore size distribution), FTIR, SEM and UV–Visible spectroscopy. These materials are efficient catalysts for liquid phase epoxidation of olefins using TBHP as the oxidant. All these TS-1 samples oxidized cyclohexene selectively into epoxide. For the TS-1 sample with 4.4 % Ti complete conversion of cyclohexene into epoxide was observed.     

Adsorption desalination of chloride ions on composite natural–synthetic materials: An approach for the reduction of chlorine corrosion in electrodeionization units

The release of chlorine in the electrodeionization (EDI) unit causes corrosion in the EDI unit, damaging ion exchange membranes and creating a safety risk for the workers. In this work, adsorption desalination of Cl^? ions on low-cost composite synthetic–natural Jordanian materials were investigated as an approach to prevent the release of corrosive chlorine gas at the positive electrode. The percentage removal reaches 25% at 25 min shaking time to 55% at 120 min, in a single batch experiment. The values of ΔH⁰, ΔS⁰, and ΔG⁰ indicate the favorability of physisorption. Zeolite and Pozzolana represent potential adsorbents of chloride.     

A novel stimuli-responsive magnetic hydrogel based on nature-inspired tragacanth gum for chemo/hyperthermia treatment of cancerous cells

Journal of Polymer Research - Derivatives of formyl pyrazole were synthesized by the reaction of acetophenone, 4-methyl acetophenone, 3-acetyl furan, 3-acetyl thiophen and phenyl hydrazine...     

Binary blends of metallocene polyethylene with conventional polyolefins: Rheological and morphological properties

The rheology and morphology of four sets of binary blends of polyethylene synthesized with metallocene catalysis (metallocene polyethylene: MCPE) with polyolefins prepared using Ziegler‐Natta catalysts have been investigated. The blend systems are MCPE with high density polyethylene (MCPE‐HDPE), polypropylene (MCPE‐PP), poly(propylene‐co‐ethylene) (MCPE‐CoPP), and poly(propylene‐co‐ethylene‐co‐1‐butylene) (MCPE‐TerPP). Cole‐Cole plots [storage melt viscosity (η′) versus loss melt viscosity (η″)], plots of the dynamic storage modulus (G′) versus the dynamic loss modulus (G″), and plots of the log melt viscosity (η*, η′, and η″) versus blend compositions were constructed. The morphology of the blends after microtoming and etching was studied. The phase morphology of MCPE‐HDPE appeared homogeneous, whereas the other three blends were heterogeneous. Rheological and morphological investigations indicated that the MCPE‐HDPE blend was miscible, but the other three blends were immiscible in the melt as well as in the solid state. These observations can be rationalized in terms of the similarity of the chemical structures of the polyolefins.     

Blends of ethylene 1‐octene copolymer synthesized by Ziegler–Natta and metallocene catalysts. II. Rheology and morphological behaviors

The rheological and morphological behaviors of commercially available three binary blends of ethylene 1‐octene copolymer (EOC) regarding the melt index (MI), density and comonomer contents, one component made by the Ziegler–Natta and the other by the metallocene catalysts, were investigated to elucidate miscibility and phase behavior. Miscibility of the EOCs blend in a melt state was related to the value of the MI, density, and comonomer content. If the comonomer contents are similar, then the melt viscosity is weight average value, otherwise it is positively or negatively deviated. The microtomed surface prepared by two different cooling processes—one is fast cooling and the other is slow cooling—indicated that all the blends were not homogenous regardless the density, MI, and comonomer content. The Ziegler–Natta catalyzed EOCs exhibited bigger spherulitic diameter and larger ring space than those of the metallocene EOCs prepared by a cooling process. The blends consisting of similar MI showed banded spherulites with different diameter, whereas the blend consisting of different MI and density takes place of explicit phase separation and phase inversion at 1 : 1 blend composition. The melt rheology appeared to influence the mechanical and film properties in the solid state. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 1950–1964, 2000     

All‐polymer electromechanical systems consisting of electrostrictive poly(vinylidene fluoride‐trifluoroethylene) and conductive polyaniline

The low elastic modulus and the ability to withstand high strain without failure make the conducting polymer attractive for a wide range of acoustic applications based on high‐strain electroactive polymers. In this article, we examine the electric and electromechanical performance of all‐polymer electromechanical systems, fabricated by painting conductive polyaniline (PANI) doped with camphor sulfonic acid (HCSA) on both sides of electrostrictive Poly(vinylidene fluoride‐trifluoroethylene) (P(VDF‐TrFE)) copolymer films, and compare them with those from the same copolymers with gold electrodes. The all‐polymer composite films are flexible, with strong coherent interfaces between the electrostrictive polymer layer and the conductive polymer layer. The electric performance such as dielectric properties and polarization hysteresis loops from P(VDF‐TrFE)/PANI film is nearly identical to those of P(VDF‐TrFE)/gold films in a wide temperature (from −50 to 120°C), and frequency range (from 1 Hz to 1 MHz). The all‐polymer systems also show a similar or even larger electric field induced strain response than that of films with electrodes under identical measurement conditions. The results demonstrate that the polyaniline/HCSA is good candidate material as the electrodes for electroactive polymers. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 945–951, 2000     

Effect of phosphorus on activity of hydrotreating catalyst of Maya heavy crude

The effect of phosphorus on physical properties of the catalyst and on activity of hydrotreating of Maya crude was studied in this work. Catalysts were prepared by the co-impregnation method. Alumina-titania binary oxide was used as a support material. The presence of phosphorus in the catalyst decreases the percentage of micropores, and it results in a decrease of specific surface area. Temperature program reduction (TPR) shows that phosphates reduce metal support interaction. It leads to the formation of polymolybdate phases in expense of strongly bonded tetrahedral molybdates. At higher P loading, polymolybdates may be present with quasi crystalline MoO₃. However, the TPR experiment is not sufficiently sensitive to distinguish several phases present on the catalysts used by the authors. A slight increment of HDM activity is observed, but HDS activity is lower in the P containing catalyst compared with the P free catalyst. The changes of physical properties of the spent catalysts are mainly due to the coke formation on the catalyst. The presence of phosphorus on hydrotreating catalysts inhibits coke formation during the hydrotreating reaction.     

Maya crude hydrodemetallization and hydrodesulfurization catalysts: An effect of TiO2 incorporation in Al2O3

Hydrotreating of Maya heavy crude oil over high specific surface area CoMo/TiO₂–Al₂O₃ oxide supported catalysts was studied in an integral reactor close to industrial practice. Activity studies were carried out with Maya crude hydrodesulfurization (HDS), hydrodemetallization (HDM), hydrodenitrogenation (HDN), and hydrodeasphaltenization (HDAs) reactions. The effect of support composition, the method of TiO₂ incorporation, and the catalyst deactivation are examined. Supported catalysts are characterized by BET specific surface area (SSA), pore volume (PV), pore size distribution (PSD), and atomic absorption. It has been found that sulfided catalysts showed a wide range of activity variation with TiO₂ incorporation into the alumina, which confirmed that molybdenum sulfided active phases strongly depend on the nature of support. The pore diameter and nature of the active site for HDS, HDM, HDN, and HDAs account for the influence of the large reactant molecules restricted diffusion into the pore, and/or the decrease in the number of active sites due to the MoS₂ phases buried with time-on-stream. The textural properties and hysteresis loop area of supported and spent catalysts indicated that catalysts were deactivated at the pore mouth due to the metal and carbon depositions. The atomic absorption results agreed well regarding the textural properties of spent catalysts. Thus, incorporation of TiO₂ with γ-Al₂O₃ alters the nature of active metal interaction with support, which may facilitate the dispersion of active phases on the support surface. Therefore, the TiO₂ counterpart plays a promoting role to HDS activity due to the favorable morphology of MoS₂ phases and metal support interaction.