BDN-GWMNN: Internet of Things (IoT) Enabled Secure Smart City Applications

Nowadays, next-generation networks such as the Internet of Things (IoT) and 6G are played a vital role in providing an intelligent environment. The development of technologies helps to create smart city applications like the healthcare system, smart industry, and smart water plan, etc. Any user accesses the developed applications; at the time, security, privacy, and confidentiality arechallenging to manage. So, this paper introduces the blockchain-defined networks with a grey wolf optimized modular neural network approach for managing the smart environment security. During this process, construction, translation, and application layers are created, in which user authenticated based blocks are designed to handle the security and privacy property. Then the optimized neural network is applied to maintain the latency and computational resource utilization in IoT enabled smart applications. Then the efficiency of the system is evaluated using simulation results, in which system ensures low latency, high security (99.12%) compared to the multi-layer perceptron, and deep learning networks.

     

Noise Reduction in VCSEL Based Wavelength Division Multiplexing System

Wavelength division multiplexing (WDM) technique plays a vital role in optical fiber communication. In this paper, a 4?×?1 WDM system has been developed with Vertical Cavity Surface Emitting LASER as optical source for each input. The performance analysis has been carried for Non Return to Zero (NRZ), hyperbolic secant, Gaussian and impulse generators over complex WDM optical fiber up to 50 km with less attenuation of 0.2 dB/Km. The Signal to noise ratio of received signal through Avalanche Photo diode in the receiver is calculated. This work identifies the best pulse generator with reduced noise performance suitable for the proposed system. The proposed system is modeled in optisys13 and insightful discussions are provided from the simulated results.

     

Lower Complex Resource Allocation Methodology based on Graph Theory and Index Matrix Rearrangement for OFDMA/MIMO-OFDMA Systems

Wireless Personal Communications - Resource allocation assigns subcarriers and power at the Base Station (BS) to different users, and is an important aspect in multiuser OFDMA downlink (DL)...     

Method for Processing Metal-Reinforced Ceramic Composites

A new process is developed to form a ceramic containing a three-dimensional network of metal reinforcement. The process involves four steps: (1) forming a powder compact containing a continuous network of either organic or carbon material by pressure filtration, (2) pyrolyzing the network to form channels within the powder compact, (3) densifying the powder while retaining the channel network, and (4) intruding metal into the channel network by squeeze casting. Pressure filtration is used to form the powder compact containing the pyrolyzable network either by mixing slurries of powder with chopped fiber or by packing powder within pyrolyzable preforms. When pressure is removed after filtration, the differential strain recovery of the powder matrix relative to the organic material can cause damage. Such damage is prevalent for a powder matrix formed from flocced slurries. However, this problem is avoided by using dispersed slurries which produce consolidated bodies that alleviate stresses arising from differential strain recovery by viscous flow. Metal-reinforced ceramic composites with different reinforcement architectures, volume fractions, and sizes can be produced with this technique.     

Effectiveness of sodium silicate as gangue depressants in iron ore slimes flotation

The recovery of iron from the screw classifier overflow slimes by direct flotation was studied.The relative effectiveness of sodium silicates with different silica-to-soda mole ratios as depressants for silica and silicate bearing minerals was investigated.Silica-to-soda mole ratio and silicate dosage were found to have significant effect on the separation efficiency.The results show that an increase of Fe content in the concentrate is observed with concomitant reduction in SiO2 and Al2O3 levels when a particular type of sodium silicate at a proper dosage is used.The concentrate of 58.89wt％ Fe,4.68wt％ SiO2,and 5.28wt％ Al2O3 with the weight recovery of 38.74％ and the metal recovery of 41.13％ can be obtained from the iron ore slimes with 54.44wt％ Fe,6.72wt％ SiO2,and 6.80wt％ Al2O3,when Na2SiO3 with a silica-to-soda mole ratio of 2.19 is used as a depressant at a feed rate of 0.2 kg/t.     

Experimental investigation of particle migration in suspension flow through bifurcating microchannels

Experimental measurements of velocity and concentration profiles were carried out to study transport of non‐colloidal suspension in bifurcating micro channels for both diverging and converging flow conditions using a combination of mirco‐particle image velocimetry and particle tracking velocimetry techniques. Migration of particles across the streamline was observed and symmetric velocity and concentration profile in the inlet branch becomes asymmetric in the daughter branches. Further migration of particles toward the center of the channel in the outlet branch make the profiles again symmetric. The evolution of velocity and concentration profiles was observed to be different in the symmetric and asymmetric bifurcation channels. The comparison of the streamlines for the fluid and the particles showed significant deviation near the bifurcation region. This may explain why there is unequal flow and particle partitioning during flow of suspension in asymmetric bifurcating channels as reported in many previous studies. © 2018 American Institute of Chemical Engineers AIChE J, 64: 2293–2307, 2018     

Stability analysis of simply-supported rectangular plates under non-uniform uniaxial compression using rigorous and approximate plane stress solutions

The non-classical problem of buckling of a simply-supported rectangular plate due to various types of non-uniform compressive edge loads is analysed here. For each case, the elasticity solution for the internal in-plane stress field is obtained rigorously using a superposition of Airy's stress functions and also approximately using extended Kantorovich method. Subsequently, the convergent buckling loads are obtained using Galerkin's method. Results are presented to highlight the dependence of the total buckling load and the corresponding buckled shape on the edge load distribution, as well as to illustrate the applicability of the approximate plane stress solutions.     

The magnitude of arsenic contamination in groundwater and its health effects to the inhabitants of the Jalangi--one of the 85 arsenic affected blocks in West Bengal, India

To better understand the magnitude of arsenic contamination in groundwater and its effects on human beings, a detailed study was carried out in Jalangi, one of the 85 arsenic affected blocks in West Bengal, India. Jalangi block is approximately 122 km2 in size and has a population of 215538. Of the 1916 water samples analyzed (about 31% of the total hand tubewells) from the Jalangi block, 77.8% were found to have arsenic above 10 microg l(-1) [the World Health Organization (WHO)-recommended level of arsenic in drinking water], 51% had arsenic above 50 microg l(-1) (the Indian standard of permissible limit of arsenic in drinking water) and 17% had arsenic at above 300 microg l(-1) (the concentration predicting overt arsenical skin lesions). From our preliminary medical screening, 1488 of the 7221 people examined in the 44 villages of Jalangi block exhibit definite arsenical skin lesions. An estimation of probable population that may suffer from arsenical skin lesions and cancer in the Jalangi block has been evaluated comparing along with international data. A total of 1600 biologic samples including hair, nail and urine have been analyzed from the affected villages of Jalangi block and on an average 88% of the biologic samples contain arsenic above the normal level. Thus, a vast population of the block may have arsenic body burden. Cases of Bowen's disease and cancer have been identified among adults who also show arsenical skin lesions and children in this block are also seriously affected. Obstetric examinations were also carried out in this block.     

Evolution of mechanical and electrical properties of tin-lead and lead free solder to copper joint interface

Cu-(Sn37Pb) and Cu-(Sn3.5Ag0.5Cu) solder joints were prepared at the same reflow temperature of 230 °C. The microstructural observation of the solder assemblies in scanning and transmission electron microscopes confirmed the presence of η-Cu₆Sn₅ in case of the former, and Cu₃Sn + η-Cu₆Sn₅ for the latter in the reaction zone. The findings are correlated with the electrical and mechanical properties of the joints. Lead free solder-Cu joint exhibited lower reaction zone thickness and improved electrical conductivity (0.28 × 10⁶Ω^− 1 cm^− 1) and shear strength ∼ 68MPa compared to conventional lead-tin solder-Cu joint. The latter showed electrical conductivity and shear strength of 0.22 × 10⁶Ω^− 1 cm^− 1 and ∼ 55 MPa, respectively. The difference in reaction zone thickness is explained on the basis of melt superheat, with Sn being the primary diffusing species in the intermetallic layer.