数控车床回转刀架故障诊断与维修方法

数控车床的回转刀架故障发生频繁,影响零部件的加工.通过对电动回转刀架的电气控制原理分析,结合实际的维修经验,提出相应的维修方法及措施.     

Investigation of Mechanical and Electrical Characteristics for Cracked Conductive Particle in Anisotropic Conductive Adhesive (ACA) Assembly

In an anisotropic conductive adhesive (ACA) assembly, the electrical conduction is usually achieved with the conductive particles between the bumps of integrated circuit (IC) and corresponding conductive tracks on the glass substrate. Fully understanding of the mechanical and electrical characteristics of ACA particles can help to optimize the assembly process and improve the reliability of ACA interconnection. Most conductive particles used in the ACA assembly are with cracks in the metal coating of the particles after the ACA bonding. This paper introduced the fracture analysis by applying the cohesive elements in the numerical model of the nickel-coated polymer particle and further simulating the cracks initiation and propagation in the nickel coating during the ACA bonding. The simulation results showed that the stress distribution on the nickel-coated particle with cracks was significantly different from that on the nickel-coated particle without crack, indicating that the stress analysis by taking the crack into consideration is very important for the reliability assessment of the ACA interconnection. The stress analysis of cohesive elements indicated that the cracks initiated at the central area of the nickel coating and propagated to the polar area. Furthermore, by the introduction of a new parameter of the virtual resistance, a mathematical model was established to describe the electrical characteristics of the nickel-coated particle with cracks. The particle resistance of the nickel-coated particle with cracks was found to be much higher than that of the particle without crack in the optimized bonding pressure range, indicating that it is necessary to take the crack into consideration for the particle conduction analysis as well. Therefore, the fracture analysis on the conductive particle by taking the crack into consideration could accurately evaluate the reliability of ACA interconnection and avoid serious reliability issues.     

A novel distributed approach to robust fault detection and identification

In this paper, we propose a novel distributed robust fault detection and identification (RFDI) scheme for a class of nonlinear systems. Firstly, a detection and identification estimator—robust fault tracking approximator (RFTA) is designed for online health monitoring. A novel feature of the RFTA is that it can simultaneously detect and accurately identify the shape and magnitude of the fault and disturbance. Moreover, it takes less online training time compared with the traditional neural network based fault diagnosis schemes. For some distributed systems, a network of distributed estimators is constructed where the RFTA is embedded into each estimator. Then we use consensus filter to filter the outputs of each estimator. One of the most important merits of the consensus filter is that its outputs can dramatically improve the accuracy of fault detection and identification. Next, the stability of the distributed RFDI scheme is rigorously investigated. Finally, two numerical examples are given to illustrate the feasibility and effectiveness of the proposed approach.     

日本落叶松及其在造纸领域中的应用

日本落叶松是适合在北半球广泛种植的早期速生树种 ,在我国的生长适应范围比较广 ,如今在我国华北、西北、西南和华中亚热带山区的部分地区已有种植。它在造纸领域中的应用研究已经开始 ,而且已经证实是一种很有潜力的造纸木材     

沸石孔结构对1-己烯异构化性能的影响

采用1-己烯为原料,对硅铝比相近、不同孔结构的沸石在脉冲微反装置上进行了评价试验,考察了FCC条件下沸石孔结构对烯烃异构化性能的影响。结果表明,大孔径的Y型沸石具有良好的异构化性能,异构化能力由强到弱的排列顺序为Y>β>ZRP>丝光沸石>镁碱沸石。     

塔顶放大器在工程设计中的应用探讨

塔顶放大器在移动通信领域有较为广泛的应用，它通过降低(改善)等效接收噪声系数，从而提高上行接收灵敏度。本文将简要介绍塔顶放大器的应用和提高接收机灵敏度的计算。     

竞争条件下政府干预经济探析

分析了竞争条件下政府干预经济的原因,阐述了政府干预经济的作用,进而指出了政府干预经济存在的一些失误,提出政府干预经济应注意的问题,从而形成一个平等、高效的市场经济局面。     

WKB近似下的Fourier衍射成象方法

对于介质目标微波衍射成象，本文引入了ＷＫＢ近似来模拟目标内部总场。基于这种近似，我们导出了Ｆｏｕｒｉｅｒ衍射公式，并采用了广义滤波逆传播方法由目标空间谱实现目标特性的重建。计算机模拟结果表明采用ＷＫＢ近似重建目标特性较Ｂｏｒｎ近似有明显改善。     

应用图论及广义简约梯度法进行压力管网优化设计

广义简约梯度法(GRG)是非线性规划算法中最有效的算法之一，本文把图论应用于广义简约梯度法优化的过程中，使输入简便，计算简化，应用GRG算法对武汉市的汉阳管网进行了模拟优化设计，并对管段的计算管径用线性规划法进行标准化，取得了满意的结果