Novel technique for SiO2 formed by liquid-phasedeposition for low-temperature processed polysilicon TFT

A technique for SiO₂ formation by liquid-phase deposition (LPD) at nearly room temperature for low-temperature processed (LTP) polysilicon thin-film transistor (poly-Si TFT) was developed. LPD SiO₂ film with a lower P-etch rate shows a dense structure. LPD SiO₂ also exhibits good electrical characteristics. LTP poly-Si thin-film transistors (TFTs) with LPD SiO ₂ as the gate insulator have been fabricated and investigated. Their characteristics indicate performance adequate for their use as pixel transistors in liquid crystal displays (LCDs)     

Clinical study on effect of bushen shengxue paste in treating renal anemia patients

OBJECTIVE: To evaluate the therapeutical mechanism of Bushen Shengxue Paste (BSSXP) on anemia. METHODS: Chronic renal failure induced anemia patients were treated with BSSXP, clinical manifestation, anemia and renal function as indicators were observed in patients. The erythropoietin (EPO) and inhibition of colony-forming unit-erythrocyte (CFU-E) in patients' serum were determined by CFU-E in vitro. RESULTS: The patients' symptoms, renal function and anemia were improved after administration with BSSXP 1-2 course. EPO in serum was slightly increased. The inhibition of CFU-E in patient's serum was significantly decreased. CONCLUSIONS: BSSXP could improve the anemia degree, its mechanism might be through clearing the inhibitor of CFU-E in serum.     

Application of artificial neural networks in voltage stabilityassessment

Voltage stability problems have been one of the major concerns for electric utilities as a result of system heavy loading. This paper reports on an investigation on the application of ANNs in voltage stability assessment. A multilayer feedforward artificial neural network (ANN) with error backpropagation learning is proposed for calculation of voltage stability margins (VSM). Based on the energy method, a direct mapping relation between power system loading conditions and the VSMs is set up via the ANN. A systematic method for selecting the ANN's input variables was developed using sensitivity analysis. The effects of ANN's training pattern sensitivity problems were also studied by dividing system operating conditions into several loading levels based on sensitivity analysis. Extensive testing of the proposed ANN-based approach indicate its viability for power system voltage stability assessment. Simulation results on five test systems are reported in the paper     

Distribution of recombination currents in the space charge regionof heterostructure bipolar devices

This paper addresses the problem of the space charge region Shockley-Read-Hall (SRH) recombination currents in heterojunctions with one noncrystalline side. A formulation which generalizes previous works is discussed. The approach is based on the drift-diffusion model with a thermionic-field emission boundary condition. The main physical parameters which determine the relative contribution of each zone of the space charge region (SCR) to the total recombination current are identified. The general analysis is applied for the first time to amorphous/crystalline heterojunctions and design criteria are established to minimize the total recombination current     

Mathematical and experimental investigation of the self-propagating high-temperature synthesis (SHS) of TiAl3 and Ni3Al intermetallic compounds

One-dimensional mathematical modeling was used to describe the self-propagating high-temperature synthesis (SHS) process for preparing TiAl₃ and Ni₃Al intermetallics. The kinetic parameters (activation energies and pre-exponential factors) for the two compounds were obtained by matching experimental measurement and the numerical solution. The results thus obtained were compared with rate parameters obtained using different methods. The activation energy was 483 and 283 kJ mol^?1 for the formation of TiAl₃ and Ni₃Al, respectively. The temperature profiles calculated using the mathematical model were compared with experimental measurements for both aluminides which indicated reasonable agreement. Fine particle size and moderate preheating increase the SHS rates.     

Dielectric characteristics of composite ceramics in the Ba(Mg1/3Ta2/3)O3-BaO · Nd2O3 · 5TiO2 system

Dielectric characteristics of composite ceramics in the system Ba(Mg_1/3Ta_2/3)O₃-BaO · Nd₂O₃ · 5TiO₂ were investigated to search for a new candidate system for microwave dielectric ceramics with modifiable dielectric constant, low dielectric loss and small temperature dependence. The dielectric constant could be adjusted in the range 25–81 by controlling the concentration of BaO · Nd₂O₃ · 5TiO₂, while the dielectric loss remained of the order of 10^–4 for some compositions. Moreover, the dielectric properties in the present system could be significantly improved by post-densification thermal treatment.     

On the J-integral in periodically layered composites

When a heterogeneous elastic material is represented by an effective homogeneous elastic solid, average stress and strain fields are used. The meaning of the J-integral in the effective homogeneous solid is investigated. A periodically layered medium is considered. The relation between the J-integrals in the original layered medium and the effective medium is derived.     

Design of FIR linear phase filters with discrete coefficients usingHopfield neural networks

A novel method is presented for designing FIR linear phase filters with discrete coefficients using Hopfield neural networks. The proposed procedure is based on the minimisation of the energy function of the Hopfield neural network, and can produce a good solution to the design of FIR linear phase filters with discrete coefficients     

The mechanics of compressive kinking in unidirectional fiber reinforced ductile matrix composites

Three distinct stages of kink band formation and propagation exist in ductile matrix composites subjected to compressive loading. These stages are called incipient kinking, transient kinking and kink band broadening. Each stage involves a different deformation mode. The mechanics governing each stage are discussed. Incipient kinking, where the peak load is attained, and kink band broadening, where the load attains a steady-state, are important in structural design. Two design philosophies are presented. References to pertinent literature are made throughout.