Improving hydrophobicity of polyurethane by PTFE incorporation

A simple and facile method was established of incorporating polytetrafluoroethylene (PTFE) on to polyurethane (PU) to improve hydrophobicity of PU by incorporating low levels of fluorine at a molecular level. Nanocomposites were made by preparing PU in the presence of PTFE using seeded miniemulsion polymerization method. The resulting PTFE/PU nanocomposites were characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectrometry, differential scanning calorimetric, and thermo gravimetric analysis (TGA). FTIR and TEM indicated changes observed in their structure, size and morphology. The water contact angle of PTFE/PU nanocomposite films increased with increasing amount of PTFE and more on blending with silica nanoparticles but a slight decrease in thermal stabilities of SiO₂/PTFE/PU nanocomposites were noticed. The hydrophobicity imparted by PTFE to PU surface was found to be at its best for 1 : 2 PTFE/PU latex film. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42779.     

Development of a Method for Reprocessing Technogenic Lead Production Raw Materials to Extract Rhenium and Arsenic

Metallurgist - The results of an experimental study into the reduction smelting of rhenium-containing cyclone dust obtained from lead production are presented. The optimal dust processing modes...     

Design and implementation of an ultrasonic sensor for rapid monitoring of industrial malolactic fermentation of wines

Ultrasound is an emerging technology that can be applied to monitor food processes. However, ultrasonic techniques are usually limited to research activities within a laboratory environment and they are not extensively used in industrial processes. The aim of this paper is to describe a novel ultrasonic sensor designed to monitor physical–chemical changes that occur in wines stored in industrial tanks. Essentially, the sensor consists of an ultrasonic transducer in contact with a buffer rod, mounted inside a stainless steel tube section. This structure allows the ultrasonic sensor to be directly installed in stainless steel tanks of an industrial plant. The operating principle of this design is based on the measurement of ultrasonic velocity of propagation. To test its proper operation, the sensor has been used to measure changes of concentration in aqueous samples and to monitor the progress of a malolactic fermentation of red wines in various commercial wineries. Results show the feasibility of using this sensor for monitoring malolactic fermentations in red wines placed in industrial tanks.     

土壤重金属污染修复技术研究及进展

总结了目前较常用的土壤重金属污染修复技术有物理修复、化学修复和生物修复,了解到不同修复技术的适用性和局限性;详细阐述了零价铁修复技术的发展概况,以及零价铁用于修复土壤重金属污染的可行性和存在的问题,为今后土壤重金属污染修复指明了一个新的方向。     

Electroactive behavior assessment of poly(acrylic acid)‐graphene oxide composite hydrogel in the detection of cadmium

Super absorbent polymers of acrylic acid‐graphene oxide (PAA‐GO) were synthesized with different percentage of chemical neutralization (0, 10, and 20%) of the acrylic acid monomer before its polymerization. The influence of their swelling and adsorption/desorption capacity of cadmium ions in aqueous solutions were studied and revealed that the GO enables greater mechanical stability in the materials. The PAA hydrogels, with the same degrees of neutralization, were also prepared without GO to compare with the composites. Additionally, carbon paste electrodes (CPE) modified with the composites PAA‐GO were used to asses and compare their adsorption properties with cadmium(II). The anodic stripping voltammetry (ASV) peak, in the differential pulse voltammetry mode, for cadmium oxidation was found to be influenced by the presence of GO into the polymer, and also by their percentage of neutralization. The accumulation of cadmium(II) on the surface of the modified CPEs was performed under open‐circuit conditions taking an account the preconcentration time of the metal cation. The presence of GO enhances the electrical signal of the electrodes in short times of immersion in cadmium(II) solutions. This property contributed to get linear responses of the CPEs modified with the composites, which were influenced by their degrees of neutralization. The PAA‐GO 10N electrode with 10% of neutralization combined the influence of GO and the degree of neutralization in the same matrix, and also showed good performance in terms of its mechanical stability, it was chosen for preliminary studies on the selectivity of the electrode toward Zn(II) and Cu(II). © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40846.     

Pyropheophytin a and 1,2-Diacyl-glycerols Over Time Under Different Storage Conditions in Natural Olive Oils

The effect of storage conditions (light, temperature, container types) and time on the quality of natural olive oils from different cultivars and Australian regions were studied. The oils’ changing quality was monitored through several physico-chemical methods (free fatty acids, peroxide value, UV-spectrometry (K₂₃₂, K ₂₇₀ and ΔK), induction time, total polyphenol content, bitterness, pyropheophytin a and 1,2-diacyl-glycerol content) and sensory analysis over 24 months. Pyropheophytins a and 1,2-diacyl-glycerols criteria showed very good performance as indicators of overall olive oil quality and freshness as well as highlighting any problems during the storage of the product. Pyropheophytin a increment averaged 7 % per year and the 1,2-diacyl-glycerols decreased at an average of 23 % per year at normal storage conditions over time.     

An efficient algorithm for computing the transmission through highly conducting thin sheild in TLM

This paper presents a new method in TLM for very efficient computation of highly conducting thin shielding walls. Firstly, the impulse response of a finite conducting sheet is computed analytically via inverse Laplace transform. Subsequently, a recursive convolution integral is formulated with the analytical impulse response. This allows a very efficient and accurate calculation of the diffusion process through imperfectly conducting walls.