Indentation characteristics of rapidly solidified Al-Cu-V and Al-Cu-Ti alloys

We report indentation characteristics of metallic glasses and nano-composites in Al-Cu-V as well as in Al-Cu-Ti systems. The melt spun ribbons of these alloys are employed to study the surface hardness characteristics of the specimen containing microstructural features at various length scales. The characterization of these materials has been done with the help of transmission electron microscope, scanning electron microscope and X-ray diffractometer. The surface hardness characteristics of melt spun ribbons with and without crystallization have been studied using a micro-hardness tester. We shall discuss the indentation behavior of ribbons in relation to their structures and microstructures.     

Underpinning-based simultaneous extraction of contiguous sections of a thick coal seam under weak and laminated parting

Around 12.5 m-thick Zero seam of Chirimiri colliery underneath Bartunga hill of M/s South Eastern Coalfield Limited (SECL) was found in two sections; 3.5 m top and 6.0 m bottom section, with a highly laminated 3.0-m-thick parting between the two sections. The laminated parting, comprised of alternate layers of shale, carbonaceous shale, coal and mudstone, was found to be incompetent for safe and clean underground working of both sections. Both top and bottom sections were developed on superimposed pillars along the floor using roof bolts. Based on laboratory testing and investigations on simulated models, an idea of underpinning was conceived for simultaneous depillaring of both the contiguous sections. Taking advantage of presence of openings in the top section, the laminated parting and roof coal band of bottom section was reinforced simultaneously by a full-column grouted cable bolt of suitable length from the floor of the top section. Underpinning consolidated parting stability through reinforcement and provided additional thickness to the critical parting thickness as the roof coal band of the thick bottom section is stitched together with the parting. Maintaining superimposition of workings in the two sections, pillars of both the sections were extracted by splitting and slicing. Splits and slices of the bottom section did not experience roof instability problems due to the presence of the reinforced overlying roof coal band and parting by underpinning. The roof coal of the bottom section was blasted down on retreat. Consolidation of the multi-layered parting by underpinning did not allow separation and collapse of its mudstone/shale layers resulting in clean coal blasted from the roof. Underpinning-based simultaneous depillaring of the contiguous sections proved its technological feasibility and success through field trials.     

Sulphated polysaccharides from Indian samples of Enteromorpha compressa (Ulvales,Chlorophyta): Isolation and structural features

Heteroglycan and xyloglucan rich fractions were extracted from Indian samples of Enteromorpha compressa in 25% yield by sequential extractions with water and alkali. This heteroglycan is sulfated and has an apparent molecular mass of 55 kDa. Chemical structural analysis of this polysaccharide revealed a branched structure having 1,4- and 1,2,4-linked rhamnose 3-sulphate, 1,4-linked glucose, 1,3- and 1,6- linked galactose, 1,4- and terminally linked glucuronic acid and 1,4-linked xylose partially sulfated on O-2. Chemical and spectroscopic analysis showed that the 4-M KOH extracted hemicellulosic fraction contained an unusual β-(1,4)-linked linear xyloglucan. Enzyme hydrolysis and analysis of the resulting fragments by matrix-assisted laser desorption ionization-time of flight-mass spectrometry (MALDI-TOF-MS) showed that this linear polymer contained partially sulfated Glc₃Xyl₂ or Glc₄Xyl₂ as oligomeric building subunits.     

A comparative study of SiAlON ceramics

Two different varieties of Si₃N₄ powders were used to prepare SiAlON ceramics. 100% β-Si₃N₄ was used from refractory grade powders (B1) and another purer 98% α-Si₃N₄ (50A) powder was used to prepare the SiAlON samples. Since SiC + SiAlON composites reportedly perform better, batches were prepared with 15% SiC addition to the refractory powders (B1) and 17.5% SiC was added to the other SiAlON composition (50A). The samples were gas pressure sintered at 1840 °C and at 22 bar with 1 h dwelling time. Thereby, we could achieve 97–98% theoretical density. The hardness was recorded 14–17 GPa while fracture toughness varied from 4.3 to 5 MPa m^1/2. Fretting experiments showed initial running-in period of 300 cycles for all the tribo-couples. After which, the steady state coefficient of frictions (COF) were achieved. Steel ball of 10 mm diameter, fretting against 50A composition, showed 0.6 average steady state COF while the same composition while fretting against alumina ball of the same diameter, showed 0.57 average steady state COF. Results have been compared with SiAlON composition derived from refractory powder (B1) and found that the 50A composition performs better under identical test conditions. Moreover, cytocompatibility study also suggests that the investigated 50A composition can be used as substrate to support cell adhesion and proliferation of L929 mouse fibroblast cell lines whereas B1 composition derived from refractory powders are toxic in nature.     

CAD on geocomposite vertical strip drains

In recent years, an increasing need has arisen for various types of construction on sites underlain by soft cohesive soils. In such cases, some methods of soil improvement are usually required to provide adequate bearing capacity and tolerable postconstruction total and differential settlements. These goals often may be achieved by precompression or preloading the site prior to construction. Precompression and preloading are frequently used in combination with vertical drains, especially in very thick soft deposits, otherwise the time required for consolidation may be unacceptably long or the instability of the foundation may be a serious concern. Therefore, the vertical geocomposite (jute and coir) drain may be used to accelerate the settlement of soil thereby making the site available for use in the shortest time. The computer program and the design chart for determining the spacing between geocomposite drains are presented. This technique is generally useful for embankment construction, tank foundation, underwater construction and landfill areas. Two projects (Haldia in West Bengal and Vashi Station Complex in Bombay) have utilized the application of geocomposite drains reported in this paper.     

Effects of mass transfer and free convection on the unsteady mhd flow past a vertical porous plate with constant suction

Effects of free convection currents and mass transfer on the unsteady flow of an electrically conducting and viscous incompressible fluid past an infinite vertical porous plate subjected to uniform suction, in the presence of transverse magnetic field, have been studied taking into account that the external flow velocity varies periodically with time in magnitude but not in direction. The effect of the induced magnetic field has been neglected. Approximate solutions to the transient flow, the amplitude and the phase of the skin-friction and the rate of heat transfer have been derived. During the course of the discussion, the effects of the Grashoff number Gr, the modified Grashoff number Gc (depending on the concentration difference), the Schmidt number Sc, the Eckert number Ec, the magnetic field parameter M, and the frequency ω have been discussed.     

Modification of nylon 6 with organochlorosilanes. II. Physical properties

The physical properties of nylon 6 yarn treated with dimethyldichlorosilane (DMCS) and vinylmethyldichlorosilane (VMCS) in nitrogen atmosphere or air in the presence and absence of an amine have been compared with those of ether-extracted parent yarn. Treatment with DMCS in nitrogen resulted in marginal improvement in breaking stress, considerable increase in breaking elongation, and elastic behavior, whereas initial modulus was decreased. A decrease in density, birefringence, and moisture regain with increase in per cent weight gain was observed. Mechanical damping was decreased considerably up to an optimum weight gain after which it was increased. Thermal properties were also determined, and results are discussed in relation to mechanical properties. The results indicate that the overall thermal stability has decreased in the chemically treated yarns. Treatment with organochlorosilanes in the presence of air results in a chain-scission reaction and a decrease in mechanical properties.     

Effect of discretization and finite nuclei radius on Kolmogorov-Johnson-Mehl-Avrami isothermal kinetics: A 2-dimensional study

The Kolmogorov-Johnson-Mehl-Avrami (KJMA) isothermal phase transformation kinetics theory assumes negligible volume of the nucleus. For systems with nano-sized grain formation, the initial introduction of finite radius of the product phase nuclei has special relevance. The value of time exponent deviates from the ideal KJMA prediction for such cases. Discrete models may be advanced for explaining such deviation. The main limitation of such an approach is the discrete time step used. We have recently studied these aspects of isothermal transformation kinetics in a systematic way with the help of discrete adaptation of KJMA model. The transformation is assumed to be polymorphic and interface controlled. In this paper we present studies on 2-dimensional (2D) systems.     

Magnetic and dielectric studies of barium hexaferrite (BaFe 12 O 19 ) ceramic synthesized by chemical route

Barium hexaferrite BaFe12O19 (BHF) ceramic was synthesized by chemical route on sintering at 1050 °C for 12 h. The synthesized material was characterized by XRD, SEM, AFM and TEM analysis. Metal oxide stretching frequencies corresponding to Fe-O, Ba-O, and Fe-O-Fe bands are confirmed by FTIR studies. The hexagonal nature of the BHF ceramic was confirmed by TEM analysis and Rietveld refinement with space group P63/mmc. The particle size observed by TEM is 175 nm. The root means square and average roughness were found to be 61.048 nm and 44.025 nm respectively. The M-T and M-H hysteresis loop indicates temperature dependent ferromagnetic behavior of BHF ceramic. The temperature and frequency dependent dielectric properties were explained by Maxwell-Wagner theory. The value of dielectric constant (ε′) for BHF ceramic was found to be 22× 103 at 100 Hz and 483 K.